PROVN OF CAPACITOR BANK PANELS, SPECIAL REPAIR FOR REPLACEMENT OF CHLORINATION PLANT AND CERTAIN REVENUE WORKS UNDER GE SATWARI

Amount

Demolition of brick/stone/boulder masonary work built in cement mortar or cement lime mortar complete including all quoins, arches, pillar etc complete.

Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc.

Taking down shutter of any description exc. 1 sqm and n.exc. 2 sqm each and refixing in same opening after resecuring or easing & adjusting complete all as requored and as directed .

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil and etc complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in any type of soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm etc complete.

Removing excavated material n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Earth filling under floor including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick etc complete all as specified and as directed

forming jambs etc to openings (to foregoing item) in cement mortar 1:6 including cutting toothing and properly bonding into old work also facing, jointing and pointing to match existing complete

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass-concrete etc complete and all as specified and as directed

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1 : 4) etc complete.

M&L for plain cement concrete 1:2:4 type B0 40 mm thick as in Damp Proofing Course to horizontal or vertical surfaces including necessary form work.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:6 on fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for RCC 1:2:4 Nominal mix type B1 using 20mm gradded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed

Description same as per item above but in chajjas etc complete all as specified and as directed

Use and waist for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) fair finished flat surfaces etc complete all as specified and as directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges etc complete all as specified and as directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs exc 10cm but n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete

M&L TMT bars 8mm dia cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality etc complete all as specified and as directed

M&L TMT bars 10 mm dia cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality etc complete all as specified and as directed

Description same as above but for 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed

M&L rendering 5mm thick in cement plaster 1:3 on ceiling surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement etc complete all as specified and as directed

Supply only liquid water proofing compound/admixture, ISI marked.

M&L for 25 mm thick PCC (1:2:4) type B-O (Using 12.50mm graded stone aggregate) as in floor etc complete.

M&Lnon skid joint free ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1 :4 etc complete.

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface including rendering 10mm thick in 1:4 rough finish to receive tiles all as specified. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

M&L three coat of white wash on walls including preparation of new plastered surface and complete all as specified

M&L three coat of white wash on ceiling including preparation of new plastered surface and complete all as specified

M&L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat alkali resistant priming paint etc complete all as specified and as directed

M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stil green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only

S&F for water proofing treatment in the following sequences:- (a) First coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm (b) APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( wt not less than 150 gm/sqm) laid on primed surface by forced torch application (c) Surface painting with a layer of blown grade bitumen of any penetration applied hot @ 1.2 Kg/Sqm .

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section(65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/openning for cooler/AC where required. Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No. CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge. NOTE: The quoted rate against the above item shall also include (i) for Provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat of coal tar on the ends of steel frame in contact with brick/concrete surface. (ii) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames. (iii) PCC block for embedding lugs.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and similar work conforming to Fe 410 etc complete all as specified and as directed

Supply only 3 mm thick sheet glass, Ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.8mm and fixed with stainless steel wire staples cpmplete all as specified.

M & L preparing steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Providing PCC 1:3:6 type C-2 (40 mm stone agg) as in plinth protection 75 mm thick finishing cement concrete even and smooth without using extra cement etc complete all as specified and as directed

S & F pressed steel frames( factory made) made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and incl PCC 1:3:6 as in back fill to chowkats all as spfd.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-200 mm, anodised section and fixed complete all as specified. (ISI Marked)

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F Galvanised steel tubes 15 mm bore medium grade complete all as specified.

S&F Galvanised steel tubes 20 mm bore medium grade complete all as specified.

S&F in repair PVC (SWR) pipes single socketed 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors

S&F in repair PVC (SWR) pipes single socketed 75 mm dia, in any length with rubber ring joints, laid in trenches or in floors

S&F in repair PVC (SWR) pipes single socketed 75 mm dia, in any length with rubber ring joints, fixed to wall

S&F in repair PVC (SWR) bends any radius 110 mm dia complete all as specified.

S&F in repair PVC (SWR) bends any radius 75mm dia

PVC (SWR) junction single (Single T) equal or unequal 110 mm bore complete all as specified.

PVC (SWR) junction single (Single T) equal or unequal 75 mm bore complete all as specified.

S&F PVC (SWR) reducers 110 mm bore complete all as specified.

PVC (SWR) vent cowl 75 mm bore all as specified.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75 mm dia

S&F 15mm dia bore CP Bib Cock two way with wall flange Make :- Jaquar cat Part No ARI-39041 or Equivalent in makes specified in "List of makes".

S&F 15mm dia bore Angular Stop cock with wall flange Make :- Jaquar cat Part No ARI-39053 or Equivalent in makes specified in "List of makes".

S&F 15mm dia bore CP Brass pillar cock Make :- Jaquar cat Part No ARI-39011 or Equivalent in makes specified in "List of makes".

S&F Towel Ring Square with round flange Make :- Jaquar cat Part No CAN-1121N or Equivalent in makes specified in "List of makes".

S&F Toilet roll holder with stainless steel flap Make :- Jaquar cat Part No CAN-1153S or Equivalent in makes specified in "List of makes".

S&F Soap dish holder Make :- Jaquar cat Part No CAN-1131N or Equivalent in makes specified in "List of makes".

S&F vitreous china wash basin wall hung pedestal type of size 630x450mm snow white,including waste pipe and CP brass wast ecoupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements & 450mm long pvc connection with PVC nut and washer etc complete Make Cera Cat Part No S2040112 or Equivalent in makes specified in "List of makes".

S&F vitreous china WC european type single piece with uf soft close slim seat covere hinges, fixing accessories, accessories Set and cistern fitting, size 365x655x765mm, S tram -300mm etc complete Make :- Cera Cat Part No LYS-WHT-38851SSM or Equivalent in makes specified in "List of makes".

S&F cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook, complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-573 or Equivalent in makes specified in "List of makes".

S&F looking mirror of size 700x500mm made of 5mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed.

M&L precast cement concrete type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and sey in CM(1:4) etc complete.

Roughning surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3kg/sqm etc complete.

M&L for 100m thick cement concrete type D-2 (Using 40mm graded stone aggregate) as in floor etc complete.

M&L for vitrified Ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and Including 15 mm thick screed bed in CM 1 :4 as in floors etc complete all as specified and as directed

M&L for vitrified Paver tiles 10mm thick (Square/rectangular) polished, area of each tiles exceeding .11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and Including 15 mm thick screed bed in CM 1 :4 as in floors etc complete all as specified and as directed

Material and labour 75mm thick PCC 1:2:4 type C-1 using 40mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

M&L 18 to 20 mm thick Granite (of any type) work ( table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 2 mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Chage. Make: Gyproc,Lafarg Boral Gypsum India,India Gypsum

S&F powder coated anodised alumunium window and ventilator shutters, fixed type without sash bar, alumunium section weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing anodised alumunium snap beading, screws etc complete all as specified

S&F powder coated anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc. ( Minimum thickness of powder coating 50 micron ) complete all as specified.

S&F powder coated anodised alumunium door shutters, alumunium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handle 02 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified

Powder coated anodised aluminium window and ventilator shutters, for sliding/side hung/Ventilators without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and recessed handle etc. one side glass gauged and one side wire gauged shuters ( Thickness of powder coating not less than 50 micron ) complete all as specified.

Anodised aluminium grills, 6mm dia size 100x100mm fixed to aluminium windows ( Thickness of powder coating not less than 50 micron ) complete all as specified.

S&F Sheet glass 4.8 mm thick , ordinary quality and glazing with beads fixed with metal panel in square in n exc 0.5 sq.m in each pane etc complete all as specified and directed

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified.

M L for preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 2 to 3 mm thick and one coat of primer complete all as specified.

Demolition of PCC/lime concrete terracing including felt in any description and in any position over roof and removing the rubbish from the work site out side of defence permises.

Removal of complete existing water proofing treatment of any description on roof ( including PCC tiles) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items.

M & L cutting out cracks to ‘V’ section in existing roof or terracing, cleaning out, wetting and filling solidly a hot mixture of bitumen and dry sand in proportion of 1:1 by weight complete all as specified and as directed

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on concrete surfaces finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only in item no 7

S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified, triple layer construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed.

S&F 1000 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) ISI marked or make specified,triple layer construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia gi pipe medium grade overflow pipe 600mm long with fitting including taking down of exisiting unserviceable tank complete all as specified in SSR Part -I complete all as specified and as directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210gms) complete all as specified and directed Make :- Prayag/Polytuf

S&F in repairs 15 mm dia bore gun metal gate valves (Class I) with iron wheel head, screwed both ends for iron pipe, ISI marked all as specified and directed for the following bore dia of pipe.

S&F 20 mm dia bore gun metal gate valves (Class I) with iron wheel head, screwed both ends for iron pipe, ISI marked all as specified and directed for the following bore dia of pipe.

Taking up or down 15mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 15 mm dia bore old serviceable steel tubing and connection in new or old position (wall, ceiling floor etc) including necessary fittings & fixtures etc complete all as specified and directed. Note :- service able pipe shall be used under this item, obtain form serial item No

Fixing only 20 mm dia bore old serviceable steel tubing and connection in new or old position (wall, ceiling floor etc) including necessary fittings & fixtures etc complete all as specified and directed. Note :- service able pipe shall be used under this item, obtain form serial item No

Supply and fixing 15 mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Supply and fixing 20 mm dia bore galvanised mild steel water tubing medium grade with and including all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and directed.

Taking down CI/PVC/AC pipes 100/110 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

S&F PVC (SWR) type 'B' pipes single socketed, 110 mm dia, in any length with rubber ring joints,fixed to wall complete all as specified.

S & F mild steel work as in hold fast and stack clamp etc made out of flat iron 25 mm x 3 mm including necessary welding or fixing with nut and bolts complete all as specified and as directed.

S&F Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165.

M&L Machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed cement screed bed laidand jointed with grey camant slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for tread of staircase over and including 15mm thick screed bed in CM 1:4 over brushing neat cement slurry with 3.0 kg og cement per sq. metre after roughing surfaces of old concrete floor by picking sweeping down with water to remove dust etc.

M&L Machine cut kota stone slab 15-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete for risers of staircase over and including 10mm thick fair and even plaster in CM 1:4 after roughing surfaces of old concrete/any type of plaster by picking sweeping down with water to remove dust etc.

Supply, installation, testing & commissioning of APFC with APP technology capacitor bank of 100 KVAR, Feeder Pillar, (IP-65) suitable for outdoor installation made out of 3.15mm thick CRCA sheet (CPRI Approved) consisting of 1/2/5/10/15 KVAR capacitor unit in tier formation housed in an integrated cubical type automatic switching "ON" & "OFF" control panel with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and painting (suitable for 400/440 volts, 3 phase 50 Hz supply system). Automatic switching with microprocessor based relay "ON" & "OFF" control panel for 100 KVAR capacitor in and including interconnection with LT panel with appropriate size of electric cable. Each panel consists of following:- INCOMING (a) MCCB 3 pole 160 Amp, 36 KA with thermal and magnetic release with Ics=100% Icu conferming to IS/IEC 60947-2 and IEC 60947-2 with short circuit and overload protection:12 IN Make:- Legrand Cat No. 420527 or Equivalent in makes specified in "List of makes". (as incoming) -01 Nos INDICATING PANEL (a) Digital multi functional meter which shows PF, Volts, Amps etc complete. (b) Aluminium bus bars of suitable capacity, fixed on insulators, coated with PVC sleeves with red, yellow, blue colour. (c) Phase indicating lamps each backed up with suitable MCB. (Make C&S, L&T, Havells) (d) Indicating lamp of each rating of KVAR capacitor unit to indicate that unit is "ON/OFF". (e) Intelligent power factor relay with 16 stages with 03 Nos CT 3 phase (Make C&S, L&T, Havells)

Supply, installation, testing & commissioning of APFC with APP technology capacitor bank of 150 KVAR, Feeder Pillar, (IP-65) suitable for outdoor installation made out of 3.15mm thick CRCA sheet (CPRI Approved) consisting of 1/2/5/10/15 KVAR capacitor unit in tier formation housed in an integrated cubical type automatic switching "ON" & "OFF" control panel with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and painting (suitable for 400/440 volts, 3 phase 50 Hz supply system). Automatic switching with microprocessor based relay "ON" & "OFF" control panel for 100 KVAR capacitor in and including interconnection with LT panel with appropriate size of electric cable. Each panel consists of following:- INCOMING (a) MCCB 3 pole 250 Amp, 36 KA with thermal and magnetic release with Ics=100% Icu conferming to IS/IEC 60947-2 and IEC 60947-2 with short circuit and overload protection:12 IN Make:- Legrand Cat No. 422529 or Equivalent in makes specified in "List of makes".(as incoming) -01 Nos INDICATING PANEL (a) Digital multi functional meter which shows PF, Volts, Amps etc complete. (b) Aluminium bus bars of suitable capacity, fixed on insulators, coated with PVC sleeves with red, yellow, blue colour. (c) Phase indicating lamps each backed up with suitable MCB. (d) Indicating lamp of each rating of KVAR capacitor unit to indicate that unit is "ON/OFF". (e) Intelligent power factor relay with 16 stages with 03 Nos CT 3 phase

Supply, installation, testing & commissioning of APFC with APP technology capacitor bank of 200 KVAR, Feeder Pillar, (IP-65) suitable for outdoor installation made out of 3.15mm thick CRCA sheet (CPRI Approved) consisting of 1/2/5/10/15 KVAR capacitor unit in tier formation housed in an integrated cubical type automatic switching "ON" & "OFF" control panel with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and painting (suitable for 400/440 volts, 3 phase 50 Hz supply system). Automatic switching with microprocessor based relay "ON" & "OFF" control panel for 100 KVAR capacitor in and including interconnection with LT panel with appropriate size of electric cable. Each panel consists of following:- INCOMING (a) MCCB 3 pole 320 Amp, 36 KA with thermal and magnetic release with Ics=100% Icu conferming to IS/IEC 60947-2 and IEC 60947-2 with short circuit and overload protection:12 IN Make:- Legrand Cat No. 422001 or equivalent make of SIEMENS(3VL)(as incoming) -01 Nos INDICATING PANEL (a) Digital multi functional meter which shows PF, Volts, Amps etc complete. (Make C&S, L&T, Havells) (b) Aluminium bus bars of suitable capacity, fixed on insulators, coated with PVC sleeves with red, yellow, blue colour. (c) Phase indicating lamps each backed up with suitable MCB. (Make C&S, L&T, Havells) (d) Indicating lamp of each rating of KVAR capacitor unit to indicate that unit is "ON/OFF". (Make C&S, L&T, Havells) (e) Intelligent power factor relay with 16 stages with 03 Nos CT 3 phase (Make C&S, L&T, Havells)

Supply, installation, testing & commissioning of APFC with APP technology capacitor bank of 75 KVAR, Feeder Pillar, (IP-65) suitable for outdoor installation made out of 3.15mm thick CRCA sheet (CPRI Approved) consisting of 1/2/5/10/15 KVAR capacitor unit in tier formation housed in an integrated cubical type automatic switching "ON" & "OFF" control panel with dust and vermin proof hinged and lockable door complete with interconnection, bonding to earth and painting (suitable for 400/440 volts, 3 phase 50 Hz supply system). Automatic switching with microprocessor based relay "ON" & "OFF" control panel for 75 KVAR capacitor in and including interconnection with LT panel with appropriate size of electric cable. Each panel consists of following:- INCOMING (a) MCCB 3 pole 160 Amp, 25 KA with thermal and magnetic release with Ics=100% Icu conferming to IS/IEC 60947-2 and IEC 60947-2 with short circuit and overload protection:12 IN Make:- Legrand Cat No. 420507 or Equivalent in makes specified in "List of makes".(as incoming) -01 Nos INDICATING PANEL (a) Digital multi functional meter which shows PF, Volts, Amp etc complete (b) Aluminium bus bars of suitable capacity, fixed on insulators, coated with PVC sleeves with red, yellow, blue colour. (c) Phase indicating lamps each backed up with suitable MCB. (d) Indicating lamp of each rating of KVAR capacitor unit to indicate that unit is "ON/OFF" (f) Intelligent power factor relay with 12 stages with 3 CTs of 3 phase. (Make C&S, L&T, Havells)

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected ot galvanised iron strip of size 32 X6 mm earth lead by means of bolt, nuts, washers of galvanised iron or steel, earth strip protected by and including GI pipe 40mm dia bore (light grade) and connected to main test point as directed including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:1½:3) type A-1 cover slab of size 54 x54 x 5 cm reinforced with 8mm dia TMT bars @ 150 mm C/C both ways with one handle for lifting, made out of 8mm dia TMT bar embedded in precast cover slab, funnel, wire mesh, 20mm bore GI pipe (medium grade) for watering, charcoal and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No 5 of SSR Part-I and testing complete all as specified and as directed.

Supply, install, testing and commissioning of chemical dosing system plunger type suitable to inject solution upto 25 LPH @ 10 kg/cm2 working pressure dosing pump coupled with 3 phase electric motor of 0.5 HP, 1440 RPM assembly with agitator in one motor, agitator with SS sweep blade duly FRP coated, FRP tank 150 Ltrs capacity complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with chemical grade PVC NRV with 3 Phase DOL starter for dosing pump made of power coated MS fabricated box comprising of LED indicators,digital volt meter, Amp meter ,Single phase preventer,high voltage low voltage protection complete all as specified. Model No: SSAPS/CDSPT/25, Make: Satya Sai or its equivalent in JESCO, RAMCO Note: Rate includes necessary electric and water connection from existing sources incl necessary civil wk as required to install the dosing plant.

Supply, installation ,commissioning of metal top deep freezer capacity 220 ltr, single phase 240 volt, 50 Hz. Complete all as directed by Engr-in-charge

Supply, installation ,commissioning of refrigerator of capacity 320 ltr, single phase 240 volt, 50 Hz. Complete all as directed by Engr-in-charge

Supply and fixing storage type geyser of capacity 25 ltr 220 volt single phase AC supply, in metallic body five star rated energy efficient including grouting on bolts/studs in wall and making good all as specified and directed by Engr-in-charge. .

Voltage stabilizer for automatic operation,copper wound single phase naturally air cooled indoor type & designed for input variation between 90 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA.

Voltage stabilizer for automatic operation,copper wound single phase naturally air cooled indoor type & designed for input variation between 90 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA.

Supply & Fixing angular stop cock with wall flange cast copper alloy chromium plated fancy type screwed both ends of size 15 mm dia complete all as specified or as directed by Engr-in-charge Make Jaguar / Essco

S&F sub main wiring with single core cable 2x 2.5 sq mm FRLSH insulated Unsheathed stranded copper conductor cable 1100 Volts grade in rigid PVC conduit (Concealed) medium grade alongwith 1x2.5 Sq mm FRLSH insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface complete all as specified and directed.

Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket complete one single pole MCB of 20 Amp complete all as specified and directed.

S & F PVC connection heavy duty with PTMT nut & washers for both ends of size 15 mm dia and 450 mm long complete all as specified.

Cutting/screwing existing steel water tubing for additions or alterations complete all as specified.

Supply & Fixing bib cock brass chromium plated 15 mm dia complete all as specified.Make Jaguar / Essco

Supply, installation, commossioning of water cooler fully stainless steel tank, electric driven singlr phase having apprrox storage and nominal cooling capacity of 40/80 Litres per hour.Make-Blue Star, Voltas, Hitachi.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape in service connection with suspension wire 4 mm dia of size 6 Sqm x 2 core complete as directed by Engr-in-Charge

Cutting of existing GI pipe line of 100 mm bore in position for inserting of CI Special such as tees,bend,coller,tail piece etc for fixing of sluice valves/for branch connection etc.

M/S S K Electricals Regd