REPAIR / MAINTENANCE OF POST LANTERN, BLDG SECURITY LIGHT ZONE A AT NEW CANTT UNDER GE WEST PRAYAGRAJJ

Amount

Labour for cutting / pruning of tree branches along security light pole around 2 mtr radius of security light and removing from site including arrangement of T&P (Axe, rope & ladder etc) complete all as specified

Disconnecting & dismantling of damaged unserviceable cable and Supply & laying of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of the following sizes including testing complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be measured & paid separately under respective items

10 Sqmm 2 core

16 Sqmm 2 core

10 Sqmm 4 core

16 Sqmm 4 core

25 Sqmm 4 core

35 Sqmm 4 core

Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes, cable etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed. Note:- For the digging of soil JCB machine will not be allowed at site, it will be done by labour only and contractor will be responsible for repair the existing cable, PCC plinth etc which will be damaged during execution of work without any extra cost.

Removing surplus excavated materials / soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

Returning, filling in including spreading, levelling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.

M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.

M&L for boring under road horizontally of size 40/50 mm bore of GI pipe for passing of cable in road in hard/soft/ loose soil complete all as specified and directed.

M&L for 40 mm bore GI tubing (in replacement) 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/ as garden post including 2 Nos suitable mild steel FI clamps of size 35 x 3 mm to support pipe with pole complete all as specified & directed.

S&F in replacement pole box junction three phase of size 297 mm x 250 mm x 130 mm, made of 2 mm MS sheet factory painted with synthetic enamel paint and inbuilt locking arrangement, outdoor type fix to pole with suitable MS clamp comprising of aluminium bus bar 16 Amp 04 Nos fix on epoxy insulated support and MCB 6 Amp 10 KA 240 volt complete all as specified & directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings any type and carrying to MES store for repair or replacement of burnt/worn out accessories like tube light, bipin holder , ballast etc (accessories or components to be provided free for replacement by department) complete all as specified & directed.

M&L for repairing of unserviceable street light fitting 70 - 200 watt, fixed on pole of any type / make by replacing burn out / worn out/ weak electronic igniter and refixing the fitting in position after repair and testing complete all as specified & directed

M&L for repairing of unserviceable garden / gate light fitting of any type / make by replacing burn out / worn out/ weak Normal LED lamp 20 watt and refixing the fitting in position after repair and testing complete all as specified & directed

M&L for repairing of unserviceable gate light fitting of any type / make by replacing burn out / worn out/ weak LED lamp 25 watt and refixing the fitting in position after repair and testing complete all as specified & directed

M&L for repairing of unserviceable LED street light fitting of any type / make of 70 - 90 watt capacity by replacing compact LED electronic driver suitable to operate on 120 to 277 Volt 50 / 60 Hz AC supply complete all as specified & directed.

M&L for repairing of unserviceable LED street / flood light fitting of any type / make of 100 - 150 watt capacity by replacing compact LED electronic driver suitable to operate on 120 to 277 Volt 50 / 60 Hz AC supply complete all as specified & directed.

Note fro Sr item No. 12 to 16:- Contractor will make a identity (ie CANo. & firm name) using permanent paint marker pen on each component which will be replaced under repair of street light and he will be liable to change his new replaced item without any extra cost which become unserviceable due to any reason during execution period of CA and further upto defect liability period. It will be contractor responsibility to take the location of unserviceable street / garden/ post top/ search light fitting by MES rep at 9 AM at power house in every working day.

S&F (in replacement) contactor 3 phase 40 Amps for street light timer in existing panel / location and connection including necessary alteration in panel / door as required for proper fixing & connection complete all as specified & directed. Make:- L&T type MNX 25 or equivalent make as specified in P.S.

Taking down single phase electric operated search light motor of capacity 2 HP, from watch tower & dismantling & rewinding with existing gauge size copper wire and as an existing Nos of turns of coils for maintaining existing capacity of the motor and varnishing ,drying and re- fixing in watch tower search light & testing for proper rotation of search light fitting at watch tower complete all as specified and directed.

Taking down single phase electric operated search light motor of capacity 2 HP, from high mast & dismantling & rewinding with existing gauge size copper wire and as an existing Nos of turns of coils for maintaining existing capacity of the motor and varnishing ,drying and re- fixing in search light & testing for proper rotation of search light fitting at high mast complete all as specified and directed.

S & F in replacement PVC insulated & sheathed flexible stranded copper conductor wire of nominal size 2.5 Sqmm 2 core complete all as specified and directed.

S&F rigid PVC conduit 'medium grade' of size 15 mm bore incl fittings, ISI marked, fixing with PCC pole/ steel tubular pole for wiring connection from pole box to light fitting and supporting with 03 Nos GI strip clamp , nut bolt complete all as specified and directed.

Supply, fixing, connecting & testing LED street light fitting of 120 watt high pressure die cast aluminium housing with minimum 125 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed.

Supply, fixing, connecting & testing LED street light fitting of 90 watt high pressure die cast aluminium housing with minimum 125 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed.

Supply, fixing, connecting & testing LED street light fitting of 70 watt high pressure die cast aluminium housing with minimum 120 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed.

Supply, fixing, connecting & testing LED flood light fitting of 100 watt high pressure die cast aluminium housing with minimum 120 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed.

Supply, fixing, connecting & testing LED flood light fitting of 170 watt high pressure die cast aluminium housing with minimum 120 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed. Make:- Philips Cat Part No. BVP 192LED 110 CW HO FG NB GR PSU or equivalent make as specified in P.S.

Supply, fixing, connecting & testing LED street light fitting of 35 watt high pressure die cast aluminium housing with minimum 120 lumen /watt system efficacy, covered potted designed driver or same make as fitting, heat resistant toughened glass with silicon gasket for IP-66 protection, better optics for uniform distribution roadway luminaires complete and fixing on existing bracket of steel tubular pole and connecting the fitting electrically using 3 way 10 Amp connector and S& F PVC conduit 20 mm & PVC copper cable 2.5 Sqmm 3 core from junction box to fitting complete all as specified & directed.

S&F post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. including connection with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed Make :- Philips, Cat Part No. BGP30035757 PSUPCINS1 or equivalent make as specified in P.S.

S&F in replacement gate light 35 watt New generation IP 65 LED post top, energy saving, environmental friendly, long life aesthetically designed with good indirect symmetrical light distribution, die-cast aluminium landscape luminaire with high power COB LED as light source with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed. Make- Havells Cat Part ENDURASPRING6PT35WLED757PSYMTOTG or equivalent make as specified in P.S.

S&F in replacement New generation, IP 65 LED post-top 35 Watt family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed Make- Havells Cat Part No. RUBYPT35WLED830PSYMTOPC or equivalent make as specified in P.S.

S&F in replacement new generation, unique concept LED Bollard 10 Watt in IP 66 to ensure sustainable performance in all sections and aesthetics which keeps the surrounding lively with PVC insulated & sheathed stranded copper conductor cable three core of size 2.5 Sqmm complete all as specified & directed Make- Havells Cat Part No. TURINBLS10WLED830PSYMTOPC or equivalent make as specified in P.S.

M&L for preparation of new steel surface of perimeter light stand 2.5 mtr long 40 mm GI pipe and apply two coat of green colour synthetic enamel paint over a coat of red oxide primer complete all specified & directed.

S&F in replacement of Lamp holder suitable for post top lantern fitting complete all specified & directed. Make:- Athena2 Code No. LHDC12115099 or equivalent make as specified in P.S.

S&F in replacement bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F MS bracket for mounting flood light fitting made out of MS angle iron of size 40 x 40 x 6 mm of length not less than 1.0 mtr fixed to pole / earth and grout using PCC & clamp, nut & bolts painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F of automatic street light switch using infrared sensor based on nature switch for automatic switching of street lights. Nature switch operation should be based on nature light lux level. Required illumination level for switching ON is less than 30 lux and for switching off more than 10 lux. The nature switch along with suitable power contactors, incoming and outgoing MCBs should be enclosed in a pole/ wall mountable enclosure make of rust proof, electric shock proof and FR grade SMC junction box confirming to IP 54 complete all as specified for the following:-

Suitable for three phase load of 5 Kw with contactors (single phase- 3 Nos), incoming & outgoing MCB SP -06 Nos, rating of 20-25 amp & circuit wiring of minimum 10 Sqmm.

Suitable for single phase load of 2 Kw with contactors (single phase- 1 Nos), incoming & outgoing MCB SP (06 Nos), rating of 20-25 amp & circuit wiring of minimum 10 Sqmm. Note for item No 38 and 39 (i) Nut bolts, clamp for fixing on pole/wall are to be included in quoted rate. (ii) The sensor must have warranty of min 2 year. (iii) Test certificate and warranty certificate must be provided by supplier. (iv) Quoted rate is inclusive of cost of marking description on the box.

S&F (in replacement) contactor 3 phase 25 Amps for street light timer in existing panel / location and connection including necessary alteration in panel / door as required for proper fixing & connection complete all as specified & directed. Make:- L&T type MNX 25 or equivalent make as specified in P.S.

Schedule of Credit (MINUS) Rs. 77439.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Aawadh associates (BID ID -3078740)

M/S Garg Sons (BID ID -3069100)

Raj and satish enterprises (BID ID -3068781)

Avion Industries (BID ID -3079631)