Z.O.X.C.No.E1/KKM/1218/2025

Earth work Open excavation by Mechanical Means for... the departmental officers. (Excluding Refilling)

Supplying and filling in foundation, basement, etc...tion and as directed by the departmental officers.

Cement Concrete 1:3:6 (One Cement, Three crushed s...artmental officers. - Mixing by mechanical means

Supplying, fabricating and placing in position Rib...nt and binding wire) Upto plinth / Basement level

Supplying and erecting steel centering including n...l be given after the concrete is laid). FOUNDATION

Brick work in following Cement Mortar using best q...Executive Engineer in charge. In Cement Morter 1:3

Plastering the surface of walls with Cement Mortar...d as directed by the departmental officers. (Wall)

Dadooing walls with following best approved qualit...ith white glazed tiles of size 150mm x 150mm x 6mm

Paving the floor with best quality vitrified Tile...pproved by Executive Engineer before use on works)

Providing Polymer Coating (Water Proof Coating) fo... cost of materials and labour, etc., complete.

Supplying, laying and jointing PVC pipes (having w...ove ground level. For laying PVC pipes of dia 25mm

Providing and laying in position, standardised con...the Department for the excess usage of materials).

Supply and fixing of TNEB meter board suitable for...CCB (Lower End) with suitable necessary connection

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unshe... with suitable colour for concealed PVC plug point

I.SI.MARKED 3 1/2X25 SQ.MM CABLE

HDPE PIPE OF SIZE 50 MM O.D X 38MM I.D

Labour for laying of cable through HDPE pipe ( 50 ...PE pipe (trench size 100mm breadth x 150mm depth )

Cost of KIOSK pillar box

Cost of Erection of KIOSK pillar box

Fountain Equipment - Supply, Installation, Testing and Commissioning of the Fountain Equipment with the following hardwares & fittingsPressure Equalizing chamber unit made out of 4"Sch80 UPVC pipe with Drilling, Tapping to suite 1/2" BSP Adaptor (totally 36 Tapped holes)9mtr long with necessary Feeding pipe arrangements as required.

Nozzle & Control Valve AssemblySupply, Installation, Testing and Commissioning of Direction adjustable Nozzle made out of Brass with Nickel coated finish of size 1/2"BSP - 8mm Orifice & 1/2" Ball valve (Brass with CP) including 1/2"x6"L pipe nipple(ss304) and 1/2"x4"L pipe nipple(ss304).

Interconnecting

Pump - Supply, Installation, Testing and Commissioning of Submersible pumpset for Fountain operating on 3phase 415V AC Supply having 1200LPM Discharge at 8mtr Head (5HP) with suitable pipe connection and Suction screen(ss304 fabricated) as required. Pump make- KIRLOSKAR

SS Mesh for Pump PitSupply, Installation, Testing and Commissioning of SS Mesh Frame made out of ss304 grade Flat & ss mesh(15mm opening) and covered with fine mesh(1.5mm opening) ss304 grade to prevent debries at Pump Chamber.

Illumination - Supply, Installation, Testing and Commissioning of Stainless steel body Underwater light fitting operating on 12V DC Supply with 27W LED Bulb RGB including fixing clamps as required.

Fountain Controller UnitSupply, Installation, Testing and Commissioning of Outdoor type Control Panel made out of MS sheet including Door with locking arrangement with powder coated finish along with – 1no. Incoming MCB, 1no. Starter with O/L Relay for Pump, 1no. Single phase preventor, 1no. MCB for Lights,1no. 230v/12v DC Power supply for Lights, 9 Channel RGB Logic Controller Unit for Lights Colour changing & 2no. 24Hr Timer for Automatic ON/OFF Operation including Panel wiring etc,. as required.

EB Service PanelSupply, Installation, Testing and Commissioning of Outdoor type EB Service Panel made out of MS sheet including Door with locking arrangement with powder coated finish along with – 1no. SFU, 3no. Busbar Procelien Fuse, 1no. Nuetral link and Metering Chamber including Wiring as required.

TNEB Charges