WBPWD/EE/ HED / NIeT-92 of 2024-25

Amount

Supply and fixing of tappered Octagonal GI pole complete (12 Mts length) complete with all accessories including foundation accessories. Thickness of Pole section:- 3mm, PCD :- 220mm Galvanizing : 65 micron minimum, capable to withstand 169Km/Hr wind loading, in-build Juction Box with 1 no 25 A SPMCB fixed on MCB Channel, 1 No 63A 4pole terminal stud fixed on suitable size bakelight Sheet . [Make : Bajaj / Transrail/ Utkarsh/ Skipper/ Subham Pole or equivalent make as approve by EIC.]. [NS]

Supply & fixing of 240V 120 W LED flood light luminarie (Make - Crompton, Cat no. TFS-504-120-57-60D-SL-GL-NSG or equivalent make of Philips/Bajaj/Wipro) with IP-66 protection as per direction of E.I.C [NS]

S&F 50 mm. dia 1.5 mtr. long G.I. 4 (four) arms arm bracket, suitable for pole head. Bracket length : 1.5 Mts, Tilt Angle : 5 deg / 10 degree. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

S&F 50 mm. dia 1.5 mtr. long G.I. Single arm bracket, suitable for pole head. Bracket length : 1.5 Mts, Tilt Angle : 5 deg / 10 degree. The arm bracket shall be properly welded with 15 mm. thick stifner plate of pole sleeve for strengthening incl. properly fixing arrangement with the pole by bolts, nuts and washer as per direction of EIC.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly . (a) Above 9.0 mtr. Size 0.6x0.6x1.91 mts [page no -H1/1b]

Providing CC (6:3:1) muffing 600x600x700 mm in size or equivalent size cylindrical muffing above groung floor level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the un-servicable muffing if necessary,without loop box.[page no -I-1/12(a)]

S/F Stainless Steel water proof looping cable box of size 200x150x100mm having hinged top Cover with rubber gasket lining, railway type mechanical locking anangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. [NS]

S & F mini pole on roof top by 80 mm dia., 2 Mtr. Long GI(M) pipe medium quality (Bansal/Jindal make) incl. making cc (6:2:1) muffing 600x600x750 mm in size with 3 mm thick neatly finished cement plaster incl. S & F 8”x6”x4” C.I. looping cable box incl. S & F 40 mm. dia. G.I.(M) 1.5 Mtr. Long arm bracket for fixing flood light & neccy connection by 2x 1.5 sq mm Cu wire. This is incl. painting as per GS. [NS]

S&F of 250V single timer DB (equivalent to 10 way SPNDB in size) with double acrylic door sheet steel enclosure, neutral bar, din rail, with lP43 protection comprises with 32A DP MCB (C-curve 10ka) and 1 no. 24 hr. analog time switch and 1 no. 25A modular type power contactor complete with internal wiring with suitable size of copper wire includ LED indicator and earthing attachment as per direction of EIC [NS]

Supply of 4/3.5/2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [Make-Gloster/KEI/Havells as approved by E.I.C]

4 Core 10 Sq.mm. (for high mast and pump)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting [ 2(a)/ F- 1 ]

Laying of cable in underground trench as per GS for the following numbers of Cables.

upto 35 Sq. mm [1(a)/ F- 2 ]

Supplying & fixing medium gauge GI Pipe (ISI-Medium) Protection with necessary fittings as per GS.

40mm dia [11(c)/F-6]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :

4 Core 10 Sq. mm [7(c)/F4 ]

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

4 Core 10 Sq. mm [8(b- xi) /F5]

Earthing with 50 mm dia G.I Pipe (Make - ISI-M) 3.64 mm thick x 3.04 mts long and 1x25 mm x 6mm galvanized G.I stripe connect to pole, 13mm dia x 80 mm long G.I Bolts , double nuts double washers incl. bitumen partly under the ground le and partly above ground level driven to an average depth of 3.65 mtrs below the ground level[2(a) /G1]

Add GST @18%

Add LWC @1%

B. ENGINEERING CO. (BID ID -5698545)

S D ENTERPRISE (BID ID -5705639)

M/S R. K. ENTERPRISE (BID ID -5698091)