Loading
Loading…
Loading…
Tender Value
₹91.0 L
EMD Value
₹1.8 L
Closing Date
5 Mar 2026, 12:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
MECHANICAL
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; Where, V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. {Authority: Indian Railways Standard General Conditions of Contract-Works, April 2022 & Advance correction slip no. 1 to GCC-2022 issued vide letter no.2022/CEI/CT/GCC-2022/Policy, dtd- 14/07/2022}. (Available at https://indianrailways.gov.in/). ( Click here to download Format)
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Authority: Indian Railways Standard General Conditions of Contract -Works, April-2022, issued vide RB letter no. 2022/CE-I/CT/GCC-2022/POLICY, Dated- 27.04.2022) (Available at https://indianrailways.gov.in/).
NB: Similar work implies "Any civil Engineering Works completed in Indian Railways, State govts or PSUs.".
ELECTRICAL LICENSE (MANDATORY): - The contractors should have to submit valid electrical contractor license along with his offer issued by any state Govt., under compilation of clause 45 of Indian Electricity Rule 1.1.1 1956 or as amended from time to time. Electrical Contractors license shall be submitted along with the offer, failing which the offer will summarily be rejected.
34 conditions
Technical Eligibility Criteria: Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past (Experience in Similar Work with supporting documents as per minimum eligibility criteria laid down in tender document).
Financial Eligibility Criteria: The tenderers shall submit requisite information as per Annexure-F, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
ELECTRICAL LICENSE (MANDATORY): - The contractors should have to submit valid electrical contractor license along with his offer issued by any state Govt., under compilation of clause 45 of Indian Electricity Rule 1956 or as amended from time to time. Electrical Contractors license shall be submitted along with the offer, failing which the offer will summarily be rejected.
The details of organization. {The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust, or society, as the case may be}.
The tenderer whether sole proprietor / a company or a partnership firm /registered society / registered trust / HUF / LLP etc. if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected.
In case of other than Company/Proprietary firm, Annexure -E (Annexure- V(A) of GCC) shall be submitted by the each member of a Partnership firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/ digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. (GCC April- 2022 with up to date correction slips).
Scanned copy of payment receipt of Bid Security (EMD) submission. Documentary proof must be submitted by tenderer in case of exemption claimed for Bid Security.
Tender Form (First sheet) duly filled in along with the bid offer.
Tenderer has to submit the documents as per Annexure attached (whichever is applicable) along with the bid offer.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
"Construction of new shed, drains lines, pathways and other assets of workshop at CRW/HRT".
CRW-HRT-M-Construction-26~ECR
CRW-HRT-M-Construction-26
Open
Works - General
12 Months
Nalanda, Bihar
₹0
₹1.8 L
5 Mar 2026
12 Feb 2026
19 Feb 2026
162 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 74,70,151.61 | ||
| — | — | — | 47,508 | ||
| Earth work in surface excavation- All kinds of soil. | — | 600.00 | — | — | |
| — | — | — | 59,200 | ||
| Hydraulic Excavator of 1 cum bucket. | — | 100.00 | — | — | |
| — | — | — | 17,27,970 | ||
| Providing and laying in position cement concrete-1:1½:3 (1 Cement: 1½ coarse sand. | — | 300.00 | — | — | |
| — | — | — | 6,02,955.2 | ||
| Reinforced cement concrete work in walls-columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, | — | 80.00 | — | — | |
| — | — | — | 2,47,580.4 | ||
| Providing and laying in position specified grade of reinforced cement-All work up to plinth level -1:1.5:3 (1 cement: 1.5 coarse sand. | — | 40.00 | — | — | |
| — | — | — | 7,96,080 | ||
| Thermo-Mechanically Treated bars. | — | 12000.00 | — | — | |
| — | — | — | 50,926.8 | ||
| Brick work with common burnt clay F.P.S. (non-modular)-foundation and plinth in: | — | 10.00 | — | — | |
| — | — | — | 2,97,132 | ||
| Brick work with common burnt-superstructure above plinth level up to floor five level in cement mortar 1:6 | — | 50.00 | — | — | |
| — | — | — | 39,486.71 | ||
| Providing wood work in frames of doors, windows-Sal wood | — | 0.50 | — | — | |
| — | — | — | 45,674.2 | ||
| Providing and fixing ISI marked flush door shutters-35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | — | 20.00 | — | — | |
| — | — | — | 4,01,820 | ||
| Fixed to steel windows by welding | — | 3000.00 | — | — | |
| — | — | — | 44,589.9 | ||
| PVC DOOR SHUTTERS | — | 30.00 | — | — | |
| — | — | — | 4,13,160 | ||
| In RSJ, tees, angles and channels | — | 6000.00 | — | — | |
| — | — | — | 13,86,760 | ||
| Flat brick | — | 2000.00 | — | — | |
| — | — | — | 39,347.5 | ||
| 200x300 mm (wall tiles) | — | 50.00 | — | — | |
| — | — | — | 34,617 | ||
| (Ceramic Floor Tiles) of size 300x300mm | — | 50.00 | — | — | |
| — | — | — | 2,98,170 | ||
| Supply & installation of precoated galvanized iron profile sheets | — | 600.00 | — | — | |
| — | — | — | 33,126.8 | ||
| 110mm dia. | — | 140.00 | — | — | |
| — | — | — | 7,100.8 | ||
| Bend 87.5o, 110mm dia bend | — | 80.00 | — | — | |
| — | — | — | 15,273.3 | ||
| 1:4 (1cement: 4 fine sand) | — | 70.00 | — | — | |
| — | — | — | 15,858 | ||
| Providing and applying plaster of Paris putty of 2mm average thickness over plastered surface to prepare the surface even and smooth complete | — | 100.00 | — | — | |
| — | — | — | 3,52,860 | ||
| Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer | — | 3000.00 | — | — | |
| — | — | — | 41,070 | ||
| Painting one coat with chocolate, red, grey or buff ready mixed paint of approved quality on steel or wood work | — | 1000.00 | — | — | |
| — | — | — | 11,253.5 | ||
| 15 mm dia. nominal bore | — | 50.00 | — | — | |
| — | — | — | 18,174.5 | ||
| 25 mm dia. nominal bore | — | 50.00 | — | — | |
| — | — | — | 20,853 | ||
| 32 mm dia. nominal bore | — | 50.00 | — | — | |
| — | — | — | 8,730.6 | ||
| 32 mm nominal bore | — | 20.00 | — | — | |
| — | — | — | 8,374.4 | ||
| 40 mm nominal bore | — | 16.00 | — | — | |
| — | — | — | 4,220.1 | ||
| 150 mm diameter | — | 30.00 | — | — | |
| — | — | — | 12,852.4 | ||
| Providing and fixing C.P. brass bib cock, 15mm nominal bore, of approved quality conforming to IS:8931 | — | 40.00 | — | — | |
| — | — | — | 17,604.8 | ||
| Providing and fixing C.P. brass stop cock, 15 mm nominal bore, (concealed) of standard design and of approved make conforming to IS:8931 | — | 40.00 | — | — | |
| — | — | — | 3,194 | ||
| 15 mm nominal bore. with 45cm length | — | 40.00 | — | — | |
| — | — | — | 35,900 | ||
| polyethylene water storage tank ISI : 12701 marked with cover and overflow pipes but without fittings and the base support for tank | — | 5000.00 | — | — | |
| — | — | — | 81,200 | ||
| For Tanks capacity over 5000 litres | — | 280000.00 | — | — | |
| — | — | — | 28,494.8 | ||
| Orissa pattern W.C. pan of size 580x440mm | — | 10.00 | — | — | |
| — | — | — | 6,774.3 | ||
| Flat back wash basin of size 550x400mm | — | 10.00 | — | — | |
| — | — | — | 4,633.2 | ||
| Flexible pipe 32mm dia. | — | 60.00 | — | — | |
| — | — | — | 20,885 | ||
| Rectangular shape 453x357mm (outer dimension) | — | 20.00 | — | — | |
| — | — | — | 21,165.6 | ||
| Providing and fixing Swan neck pillar tap | — | 40.00 | — | — | |
| — | — | — | 1,07,300 | ||
| Uprooting weeds on or from station platforms, surroundings as well as slopes after loosening surface by raking | — | 10000.00 | — | — | |
| — | — | — | 15,093 | ||
| Renewing glass panes with putty and nails wherever necessary Float Glass panes of thickness 4 mm | — | 20.00 | — | — | |
| — | — | — | 22,470 | ||
| CONCERTINA WIRE | — | 100.00 | — | — | |
| — | — | — | 22,711.8 | ||
| P.V.C. automatic flushing cistern 5 litres capacity (With Fittings) | — | 30.00 | — | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .