801453/E8 SPECIAL REPAIRS TO BUILDING NO P-11,12,13,14TYPE-V SERVICE OFFICERS MD ACCN AND P-18TYPE-III CIVILIAN MD ACCN AT CQAEWE BANGALORE

Amount

SCH 'A' PART-I (B/R Works) Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thick above or below ground level all as directed

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work all as directed.(Reinforcement cut as required to facilitate demolition)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises all as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches etc complete and all as directed.

M&L for vitrified light coloured ceramic tiles 10 mm thick (square/rectangular)area of each tile not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

All as per item No 5 hereinbefore but in skirting/ dado including necessary raking out joints, cutting and waste of tiles over and including 10mm thick rendering in cement mortar 1:3 all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

All as per item No 7 hereinbefore but in skirting/ dado including necessary raking out joints, cutting and waste of tiles over and including 10mm thick rendering in cement mortar 1:3 all as specified and directed.

M & L for Joint free Non-skid ceramic coloured tiles 7 to 8mm thick , matt finish (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M & L for Joint free ceramic coloured tiles 7 to 8mm thick , matt finish (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat in cement mortar 1:3 all as specified and directed.

M&L for coloured glazed ceramic tiles of size 450x350mmx7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado including necessary raking out joints, cutting and waste of tiles over and including 10mm thick backing coat in cement mortar 1:3 all as specified and directed.

M & L for Sadarahalli granite slab flooring 18-20mm thick set and jointed with grey cement slurry mixed with pigment to match the shade of slab all as specified and directed.

M&L for 20 mm thick screed bed in cement mortar 1:4 for laying granite floor slab on stair case all as specified and directed.

M&L for 10mm thick rendering in cement mortar 1:3 on walls all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base for laying floor finishes, finished fair to receive tiles all as specified.

Removing building materials etc, (other than spoil payable under items 3028 to 3031 in Section -3 - Earthwork) to a distance of 1 km but n. exc 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination all as specified and directed.

M&L for Machine cut cudappah stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete in floors over and including 20mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, wash basin oval shape, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed in cement mortar 1:4 all as specified and directed.

Rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations all as specified and directed.

Taking up or down old rusted unserviceable steel tubing 15mm bore and connection all as specified and directed.

Taking up or down old rusted unserviceable steel tubing 20mm bore and connection all as specified and directed.

Taking up or down old rusted unserviceable steel tubing 25mm bore and connection all as specified and directed.

S&F 15mm bore steel tubes medium grade galvanised with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 and fixed complete to walls and ceiling or laid in floor all as directed.

S&F 20mm bore steel tubes medium grade galvanised with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 and fixed complete to walls and ceiling or laid in floor all as directed.

S&F 25mm bore steel tubes medium grade galvanised with all fittings such as sockets, bends, unions, tee, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 and fixed complete to walls and ceiling or laid in floor all as directed.

S&F in repairs vitreous china wash down water closet (Pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed.

Supply only plastic seat cover closed pedestal pattern with flat bottom and cover and MS chromium plated or aluminised hinging device all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa pattern of size 630mmx450mm white with integral foot rests excluding flushing cistern and flush pipe all as specified and directed.

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level with inlet ball valve float, flush pipe and handle complete all as specified .

S&F in repair vitreous china, white, counter top wash hand basin oval shaped of size 400 x 525 x 195 mm fitting into counter top including brackets all as specified and directed.

S&F PVC cabinet mirror of size 450 x 600mm box type as per sample approved by Engr-in-charge.

Supply only swan neck chromium plated pillar taps fancy type with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' screwed for iron pipes of 15 mm dia all as specified and directed.

S&F in repairs 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with capstan head handle, , screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs 15mm dia angle stop valves(concealed type), fancy type, chromium plated, screwed down, high pressure with long shank and cup screwed both ends for iron pipes or for Unions all as specified and directed.

S&F in repairs single lever wall mixer, non telephonic type, brass, chromium plated, fancy type, with capstan head handles with lettered 'Hot' or 'Cold', screwed down high pressure, including CP brass wall flanges and necessary extension nipples screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in repairs PVC connection 15mm dia with PTMT nuts of length 600mm complete all as specified and directed.

S&F Geyser connection pipe "Hot or Cold" of 15mm dia with nuts of length 600mm complete all as specified and directed.

S&F in repairs brass Choromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs shower arm 15mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

S&F in repairs 450mm long towel rail of PTMT with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F shelf of PTMT with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Liquid soap container of PTMT with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F Towel ring of brass, chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. Make: Jaquar Model: AQN-7721 or equivalent as approved by GE as per List of Manufacturers

S&F Stainless steel Toilet paper holder complete all as specified and directed. Make: Jaquar Model: AKP-35751P or equivalent as approved by GE as per List of Manufacturers

S&F Stainless steel Soap dish fixed to wall complete all as specified and directed. Make: Jaquar Model: ACN-1131N or equivalent as approved by GE as per List of Manufacturers

S&F Corner glass shelf large of size 300x300mm all as specified and directed Make: Cera or equivalent as approved by GE as per List of Manufacturers

S&F glass shelf for wash hand basin all as specified and directed Make: 'Jaquar' Model : ACN-1171N or equivalent as approved by GE as per List of Manufacturers

M & L in repairs for 100mm dia Cast Iron nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repairs cast iron floor trap 100mm dia outlet, with grating including jointing to waste pipe with solvent cement & fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC floor multi trap 75mm dia outlet, with grating including jointing with solvent cement & fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F PVC (SWR) Pipe 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) Pipe 75mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F PVC (SWR) bends 110 mm dia in any radius complete all as specified and directed.

S & F PVC (SWR) bends 75 mm dia in any radius with access door complete all as specified and directed.

S & F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR) reducers - 110mm dia bore complete all as specified and directed.

S & F PVC vent cowl 75mm dia bore complete all as specified and directed.

S & F 15mm dia brass CP Health faucet with 1.20m long PVC flexible pipe and wall hook complete all as specified and directed. Make : 'Jaquar' Model : ALD-CHR 565 or equivalent as approved by GE as per List of Manufacturers

S & F 15mm dia Two way bib tap, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed complete all as specified and as directed Make: Cera or equivalent as approved by GE as per List of Manufacturers

S & F MS angle Iron brackets for fixing of sink conforming to Fe 290. Gde-E-165 (Brackets over 10 kg each to be measured under structural steel) all as specified and as directed.

S & F in repairs Grating doom with center hole for wash hand basin 125mm dia of PTMT all as specified and as directed. (Minimum weight 40gms)

S & F in repairs Grating doom without center hole 100mm dia of PTMT all as specified and as directed. (Minimum weight 25gms)

S & F Mild steel chromium plated Peg stay for hanging cloth etc complete all as specified and as directed

S & F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed.

S & F in repairs 32mm dia Waste fittings brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed all as specified and directed.

Use and waste of Form work to suspended slab such as roof slab, down ward facia, chajja, floor slab and similar work, rough finished surfaces of concrete not exceeding 200 mm thick (Horizontal or sloping) all as specified and directed.

Use and waste of Form work to edges of roof slab, down ward facia, chajja, floor slab and similar work exc 5cm & n.exc 10cm wide, rough finished surfaces of concrete all as specified and directed.

M & L for RCC Type B1 1:2:4 (using 20 mm graded stone aggregate) as in slabs, supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves, and the like all as specified and directed. (upto a height of 10 mtrs)

M & L for RCC Type B0 1:2:4 ( using 12.50 mm graded stone aggregate) as in chajjas and the like all as specified and directed.

Taking down cement/lime plaster from walls of any description, including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan to any radius built in CM 1:4 in half brick thick walls complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for Walling of squared rubble (Bangalore type), regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement on internal surfaces of walls complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement on external surfaces of wall complete all as specified and directed.

M & L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in drawers/cup boards complete all as specified and directed.

M & L for first class hardwood plain fillets exceeding 3 & n.exc 6 sqcm, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed.

M & L for applying 3mm thick wall care putty on walls complete all as specified and directed.

S & F Brass Drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F hinges (Clips) with automatic closing of good quality for shutters of cupboards/ lofts of kitchen complete all as specified and directed.

S & F 40mm Brass knobs for cupboard as approved by GE, fixed with nut, screws and washers of mild steel bright finished, complete all as specified and as directed.

S & F MS continuous (Piano) hinge bright finish or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

Demolishing & Removing existing Sunken floor filling from sunken slab concrete complete all as directed and specified.

Removing existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, cleaning the surface & removing the debris to a distance exc 1 km and n.exc 5 km from the starting point all as specified & directed.

M & L for APP based polymeric bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforcement, tearing strength of 180 N by torch application including min 10cm side over lap & 15 cm end laps and applying a coat of blown bitumen @ 1.20Kg/sqm hot bitumen 90/15 over and below the membrane finished with solar reflective bitiminous Aluminium paint / Primer @ 0.10 Kg/Sqm complete all as specified and directed

M & L for rendering 15mm (average) thick in CM (1:4) on concrete surface, finished even and smooth without using extra cement, mixed with water waterproofing compound all as per manufacturer's instructions and as directed by Engr-in-charge Note:- WPC shall be measured and paid separately

M & L for APP based polymeric bitumen primer @ 0.20 Kg/sqm and providing 4mm thick APP Modified water proofing membrane weighing not less than 4.0 Kg/Sqm reinforced with non woven polyester matt weighing not less than 160 gm/sqm having softening point not less than 150 degree centigrade having tensile strength of 650N/Sqcm and 350N/Sqcm in longitidunal and transverse directions respectively of the reinforcement , tearing strength of 180 N by torch application including min10cm side over lap & 15cm end laps and applying a coat of blown bitumen @ 1.20 kg/sqm hot bitumen 90/15 over and below the membrane finished all as specified and directed by Engr-in-charge. (Accessible roof treatment/ sunken)

M & L for Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over and including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed, pointed in CM 1:3 mixed with 5% crude oil by weight of cement all as specified and directed

Supply only approved integral water proofing compound all as specified and directed Make : Conplast x 421 IC, of M/s Fosroc Chemical (Inida) Ltd or equivalent as approved by GE as per List of Manufacturers

M & L for 40mm thick Cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub base of flooring all as specified and directed

M & L for 10mm thick rendering in CM 1:3 finished even and smooth without using extra cement all as specified and directed

M & L for cement concrete 1:5:10 type E2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete all as specified and directed

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 to match the existing floors. complete all as specified and as directed.

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external perimeter of wall below concrete or masonry apron using chemical emulsion at the rate of 2.25 litre per linear metre including drilling and plugging holes etc complete all as specified and as directed.

M & L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment at points of contact of wood work by chemical emulsion (water based solution) at the rate 0.50 litres per hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm C/C and sealing the same complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for stair handrail, balcony hand rail complete all as specified and as directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface using broken stone/boulders complete all as specified and as directed.

M & L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone agg) as in plinth protection finished even and smooth w/o using extra cement. PCC shall be laid in alternate panels area not exc 2 sqm, with 6mm wide joints throughout the thickness, joints shall be filled with mastic filling bitumen & sand in the ratio of 1:3 complete all as specified and directed.

M & L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100 mm thick concrete slab all as specified and directed.

Taking down steel window/ventilators/louvers shutter exc 0.5 sqm but n exc 2.5 sqm (Without taking off shutters from the frame) complete including making good all as specified and directed.

M & L for factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed.

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down door chowkats or frames exc 1.5 sqm but n exc 4 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm all as specified and directed. (Panelled door+Flush shutter+Skeleton shutter)

Taking down shutters of any description n. exc 1 Sqm all as specified and directed.

Taking down shutters of any description exc 2 Sqm each and refixing in the same opening all as specified and directed.

Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B0 ) using 12.5 mm graded aggregate¸ depth of embedded portion of hold fast not exceeding half brick all as specified and directed.

S & F 2nd class hardwood Glazed and skeleton 30mm thick shutters for windows, ventilators, etc. provided with stiles and rails, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats etc. complete all as specified and directed.

S & F 2nd class HW 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc. complete all as specified and directed.

S & F flush shutter 35mm thick solid core construction with particle board core membrane doors decorative finish on one side duly finished and polished other side all as per manufacturer's directions of required tint / colour including teak wood lipping as necessary all as directed Note: Manufacturer MAXON or equivalent as approved by GE as per List of Manufacturers

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, edges painted to match with prelaminated sheet all as specified and directed.

M & L for Factory made 28 to 30mm thick EPS Core Solid PVC Moulded Door Shutter consisting of frame made out of M.S.Tube. The core panel shall consist of 25mm thick High Density EPS conforming to IS 4671, routed with design, sandwiched in between 2mm thick Moulded PVC sheet on one face and 2mm PVC sheet on the other side. the door on all the edges to be sealed with lipping of 10mm (5mm x2) thick x 25mm wide PVC sheet for three sides & 60mm wide PVC sheet for lock side. The lipping shall be bonded to the 2mm Moulded / Plain PVC sheet with solvent cement including neccessary fittings etc complete as specified and directed.

M & L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed as specified and directed.

S & F mild steel work in holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 as specified and directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron works, new or old of any description and treating small articles such as stop covers, gully gratings, hold fasts, ends of post, back of chowkhats etc with tar or coal tar black paint, area of tarred n.exc 0.1 sqm. as specified and directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron works, new or old of any description and treating ends of posts, back of chowkhats with tar or coal tar black paint, area of tarred exc 0.1 sqm & n.exc 0.5 sqm as specified and directed.

S & F aluminium strips for doors including all fittings all as specified and directed.

S & F 3mm thick sheet glass and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

S & F Pressed steel frames for doors of size 125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S & F 100mm long Butt hinges, Medium weight, cold rolled mild steel, and fixed to MS frame including necessary welding complete all as specified and directed.

M & L for cement concrete 1:3:6 type C-0 (using 12.50mm graded stone aggregate) to fill the back of chowkats complete all as specified and directed

S & F in repairs 100mm long Butt hinges, Medium weight, cold rolled mild steel, and fixed to MS frame/wooden frame by cutting out from existing frame incl necessary welding complete all as specified and directed.

S & F in repairs 75mm long Butt hinges, Medium weight, cold rolled mild steel, and fixed to MS frame /wooden frame by cutting out from existing frame incl necessary welding complete all as specified and directed.

S & F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt 150 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S & F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolt and sliding bolts of extruded section all as specified and directed.

S & F 100mm size mortice lock for doors of Brass, 4 lever type including handles all as specified and directed. Make: Godrej or equivalent as approved by GE.

S & F aluminium anodised, barrel tower bolt 150mm long of extruded section all as specified and directed.

S & F aluminium anodised, barrel tower bolt 100mm long of extruded section all as specified and directed.

S & F 150mm long aluminium handle cast type anodised all as specified and directed.

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor with 150mm overall length of cover plate all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified and directed. Note : Rate quoted by the contractor is inclusive of rate for fixing of wire cloth in steel & wooden windows/ventilators with MS flat iron 15 x 3mm and fixing of wire cloth in wooden shutters with 2nd class hard wood beading .

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as specified and directed. Note : Rate quoted by the contractor is inclusive of rate for fixing of wire cloth in steel & wooden windows/ventilators with MS flat iron 15 x 3mm and fixing of wire cloth in wooden shutters with 2nd class hard wood beading

S & F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified and directed.

S & F 3mm thick figured glass pin head type and glazing with oil putty in squares exceeding 0.50 Sqm in each pane all as specified and directed.

S & F aluminium powder coated drapery rod 25mm dia, corrugated, cut to required length and fixed to brackets all as specified and directed.

S & F aluminium powder coated fancy type suitable brackets for 25 mm dia pipes fixed at both ends of openings, fixed over 1st class hard wood round wooden blocks of 65mm dia and 20mm thick fixed to stone wall/Brick wall using screws incl necesary drilling & finished with polishing. Each opening shall have two fillets at both ends.

S & F in repairs mild steel, plain black sheet 1.25mm thick in covering to door shutters/covering to door chowkhats etc, cut to size, edges beaded, hole punched incl round headed screws, welded/ riveted seams including bending, turning up, mitred angles, stopped ends etc. all as specified and directed

Raking out joints/ pointing to squared rubble masonry, coursed or uncoursed built in cement mortor and M & L for Keyed pointing in Cement mortar 1:4 to stone masonry surfaces all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Disconnecting existing tanks of capacity exc 250 Ltrs & n. exc 500 Ltrs and refixing in position all as specified and directed.

Dismantling of water storage tank of capacity exc 500 ltrs & not exc 1000 ltrs and removing to store yard all as specified and directed.

S & F Rotational moulded polyethylene water storage tank of 500 ltr capacity (cylindrical vertical with closed top), triple layered, white in colour hoisted and fixed in position incl screw type lid and all accessories complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tank of 750 ltr capacity (cylindrical vertical with closed top), triple layered, white in colour hoisted and fixed in position incl screw type lid and all accessories complete all as specified and directed.

S & F Ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe of size 20 mm dia fixed in repair complete all as specified and directed.

Grubbing up plants/vegetation digging out roots, filling of holes of any description upto double storey construction from roof and walls and making good the decayed portion in CM 1:3 mixed with WPC including coving using form work if necessary and finally finishing the surface with 15mm thick rendering in CM 1:3 complete all as directed and specified.

S & F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S & F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down old damaged CI/PVC waste pipes of any dia in sunken floors complete all as directed and specified.

S & F GI medium grade spout pipe 32mm dia, 50cm long all as specified and directed.

M & L for preparation of surface and applying two coats of White wash on old wall surfaces all as specified and directed.

M & L for preparation of surface and applying two coats of White wash on old ceiling surfaces all as specified and directed.

M & L for Complete removal of existing treatment, preparation of old surfaces and applying two coats of oil Bound Distemper over a coat of wall primer over a coat of 1mm thick wall care putty on walls complete all as specified and as directed .

M & L for Preparing the new surfaces of wall and applying two coats of oil bound distemper over a coat of primer including interior wall care putty 1mm thick all as specified and as directed.

M & L for Complete removal of existing treatment and applying two coats of oil Bound Distemper over a coat of primer over a coat of 1mm thick wall care putty as on ceilings complete all as specified and as directed .

M & L for Preparing old painted wooden surfaces and over 10 cm width or girth applying one coat of Synthetic enamel Painting to wooden surface all as specified and directed.

M & L for Preparing old painted steel surface over 10 cm width or girth and applying one coat of Synthetic enamel Painting to steel surface all as specified and directed.

M & L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of Synthetic enamel Paint over a coat of red oxide zinc chrome primer all as specified and directed.

M & L for synthetic enamel paint on prepared old wall surface for writing letter or figures (Block, Roman, Italic or Indian) n exc 30cm height on wall surface all as specified and directed.

M & L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats all as specified and directed.

M & L for cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) 40mm thick in floor finish including finishing even and smooth using extra cement all as specified and directed.

S & F 1mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required etc. complete all as specified and directed.

S & F MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 - W (Gde-E- 250) quality-A complete all as specified and directed.

S & F MS Framed work conforming to Fe-290.Gde-E-165 as in doors or grills/guard bars/gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for TMT bars 10mm dia and over cut to length, bent to shape required, including bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S & F Plain mild steel wire 4mm dia, galvanised class 3, in detached work as for fixing of mosquito/cloth drying and fixing to straining bolts, straining eyes etc., including securing with and provn of galvanised iron tying wire, galvanised iron staples or steel pins complete all as specified and directed.

M & L for Machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:4 with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed

S & F powder coated Anodised aluminium three track sliding window, ventilator , louvers with frame comprising of aluminium frame (track) with gradetrack of size 92.5x31x1.50mm fixed to walls and two Nos of sliding shutters with 5mm thick tinted glass and one No sliding shutter with stainless steel wire cloth with 0.36mm nominal dia of wire and average width of aperture 1.40mm including necessary rubber gaskets and aluminium beadings & clips of 0.90mm thick etc and finished with metal plate on gaps of the surface in contact with masonary walls and necessary handles and locking arrangements all as specified and as directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers of size n.exc 1.5 sqm all as specified and as directed.

M & L for washing, rubbing down and stopping of new painted wall surfaces and applying two coats of anti fungal exterior weather proof paint all as specified and as directed.

S & F Door closer of aluminium (Die cast ) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.

M & L for Complete removal of existing treatment and preparation of old surfaces and applying two coats of anti fungal exterior Weather proof Paint over a coat of wall primer complete all as specified and directed

M & L for preparation of newly plastered wall surfaces and applying two coats of anti fungal exterior Weather proof Paint over a coat of wall primer complete all as specified and directed

S & F Stainless steel basket including telescopic channel on both sides fixed as in kitchen cabinet drawers of size 48 X 50 X10cm all as specified and directed

S & F Stainless steel basket including telescopic channel on both sides fixed as in kitchen cabinet drawers of size 48x50x15cm all as specified and directed

S & F Stainless steel basket including telescopic channel on both sides fixed as in kitchen cabinet drawers of size 48x50x20cm all as specified and directed

Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

M & L for PCC 1:3:6 type C1 (using 20 mm graded stone agg.) as in bed blocks for hold fast etc., including necessary form work complete all as specified and directed.

S & F 32mm waste coupling of PTMT (half or full threaded) for wash hand basin (Min wt. 45 gms) all as specified and as directed.

SCH 'A' PART-II (Internal Electrification) Taking down carefully copper/aluminium point wiring (light, fan,socket and Power) complete including fixure and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings, CFL fittings etc., removing materials for taking credit and making good disturbed surface of wall, floors, roof etc all as directed.

Taking down existing DBs including MCCBs / MCBs 415/230 volt and making good disturbed surface all as directed.

Taking down existing sheet metal MCB plug socket enclosure of any capacity and making good disturbed surface all as directed.

Taking down existing aluminium/copper sub main wiring of any size all as directed.

Taking down sheet metal meter panel of any type any capacity and making good the disturbed surfaces all as specified and directed.

M & L for point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI marked with valid CM/L No. drawn in existing concealed PVC rigid non metalic conduit, including replacement of mild steel/pressed steel sunken boxes/Modular box, inner/outer sheet and fixed concealed, covered etc., including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for one light point controlled by one 5/6 amps one way switch.

All as per item No.188 here-in- before but for One ceiling fan/exhaust fan point controlled by one 5/6 Amps, one way switch

All as per item No. 188 here-in- before but for One light point controlled by two, two way 6 Amps switch

All as per item No. 188 here-in- before but for One 3 pin 6 Amps socket outlet point on independent board

All as per item No. 188 here-in- before but for One 3 pin 6 Amps socket outlet point on same board

All as per item No. 188 here-in- before but for One bell point controlled by one bell push switch 6 Amps one way

All as per Srl item No 188 here in before but point wiring with 2 runs of copper conductor cable FRLS 2.5 sq mm for one 3 pin socket outlet ,15 Amps and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board .

M & L for point wiring using approved colour code as per IS (Red, Black and Green for single phase circuits) with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI marked with valid CM/L No. drawn through and including rigid non-metallic PVC conduit of suitable size but not less than 20mm dia with all fittings, fixed on wall surface, including decorative modular cover plates (inner and outer) suitable for housing modular pattern switches/ sockets/ regulators etc, alongwith necessary metal sunk boxes with 3mm thick flush mounting in the wall including PVC insulated multi-stranded copper conductor 1.5 sqmm nominal cross sectional area single core FRLS cable as earth continiuty conductor to common earth and connecting to earth dolly complete all as specified and as directed at site for one light point controlled by one 5/6 amps one way switch.

All as per item No.195 here-in- before but for One ceiling fan/exhaust fan point controlled by one 5/6 Amps, one way switch

All as per item No. 195 here-in- before but for One light point controlled by two, two way 6 Amps switch

All as per item No. 195 here-in- before but for One 3 pin 6 Amps socket outlet point on independent board

All as per item No. 195 here-in- before but for One 3 pin 6 Amps socket outlet point on same board

All as per item No. 195 here-in- before but for One bell point controlled by one bell push switch 6 Amps one way

All as per Srl item No 195 here in before but point wiring with 2 runs of copper conductor cable FRLS 2.5 sq mm for one 3 pin socket outlet ,15 Amps and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board .

S & F modular type switch 6 Amps, one way 1 module 230 V AC all as specified.

S & F Modular Type two way switch, 6 Amps, 1 module 230 V, AC complete all as specified.

S & F modular type switch 16 Amps, one way 1 module 230 V, AC all as specified.

S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module working on 230 V AC complete all as specified.

S & F Modular Type Socket outlet, 6/16 Amps, 5/3 pin combined 2 module working on 230 V AC complete all as specified.

S & F Modular Fan regulator, step type, 100/120W - 2 module complete all as specifed and directed.

S & F Modular Bell push 6 Amps, one way 230 V AC complete all as specified.

S&F ceiling rose, PVC polycarbonate, isolated body with three terminals 230 V complete all as specified and as directed

S&F electric call bell, Ding Dong type AC 230V, single pole all as specified and as directed

M&L for taking down existing ceiling fan of any size and any capacity including painting and writing MES No. of ceiling fan with one coat of synthetic enamel paint by spraying incl filling cavities with filler after cleaning all dust etc & refixing the same in the same location as directed.

M&L for taking down existing exhaust fan of any size and any capacity including painting and writing MES No. of exhaust fan with one coat of synthetic enamel paint by spraying incl filling cavities with filler after cleaning all dust etc & refixing the same in the same location as directed.

M&L for taking down existing water heater of any size and any capacity including painting and writing MES No. of water heater with one coat of synthetic enamel paint by spraying incl filling cavities with filler after cleaning all dust etc & refixing the same in the same location as directed.

M&L for sub main wiring with PVC insulated FRLS multi stranded copper cable 2 runs 6 Sqmm 1100V grade with stranded copper conductor in and incl rigid PVC conduit on wall surface of suitable size (ISI marked) incl all specials like joint, elbow, Tee, junction, etc., and provision of PVC insulated FRLS copper conductor single run of multistranded copper cable green colour 6.0 sqmm for earth continuity all as specified and directed.

M&L for sub main wiring with PVC insulated FRLS multi stranded copper cable 2 runs 4 Sqmm 1100V grade with stranded copper conductor in and incl rigid PVC conduit on wall surface of suitable size (ISI marked) incl all specials like joint, elbow, Tee, junction, etc., and provision of PVC insulated FRLS copper conductor single run of multistranded copper cable green colour 4.0 sqmm for earth continuity all as specified and directed.

S & F 20mm dia rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth, tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc including cutting chases on wall for conduits and sinkings for boxes and making good to walls, floors etc for recessed or concealed conduit wiring all as directed.

S & F TPN 04 way vertical type sheet steel powder coated distribution board double door with 200 Amps rated bus bar suitable for MCCB fixing as incomer and MCBs fixing as outgoing Neutral link, Earth bar and Din rail, IP-43 protection, door earthing, mechanical, impact strength IK 08, insulated bus bar assembly working on 415 V, 50 Hz AC supply all as specified and directed. Make: Havells cat part No. DHDLVDRWGOF004 or its equivalent model in Indo Asian/L&T/ABB/Standard

S & F SPN 12 way horizontal type sheet steel powder coated distribution board double door with 200 Amps rated bus bar suitable for MCB fixing as incomer / outgoing Neutral link, Earth bar and Din rail working on 240 V, 50 Hz AC supply all as specified and directed. Make: Havells /Indo Asian/L&T/ABB/Standard

S & F SPN 08 way horizontal type sheet steel powder coated distribution board double door with 200 Amps rated bus bar suitable for MCB fixing as incomer / outgoing Neutral link, Earth bar and Din rail working on 240 V, 50 Hz AC supply all as specified and directed. Make: Havells /Indo Asian/L&T/ABB/Standard

S&F MCCB 63 Amps 4 pole, 16 KA working on 415 volts, 50 Hz AC supply complete all as specified and directed.

S&F RCCB DP 40 Amps, 300mA, working on 240 volts, 50 Hz AC supply complete all as specified and directed.

S&F MCB Single pole 240 volts, 50 Hz, 6 to 32 Amps, 10KA rupturing capacity, complete all as specified and directed.

S & F single pole and neutral enclosure with two pin and earth plug and socket with one single pole MCB 20 Amps 240 Volts all as specified and directed.

Supply and fix in repairs LED light fitting 1 x 20 W, surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block, etc., including 20 W - 1 No LED T8 tubular lamp with in built driver with all accessories and connecting up with 3 core 0.5 Sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and directed. Make: (i) Cat Part No. : DMLN1LT8-16 of Crompton for fitting or equivalent model in Havells/Philips/Bajaj/Wipro (ii) Cat Part No. : LTT8-20 of Crompton for LED tube light or equivalent model in Havells /Phillips /Bajaj /Wipro

Supply and fix in repairs LED light fitting 1 x 8 W, surface mounted, industrial box type luminaire with CRCA body, pre-coated in white & pre-wired for LED tube, bipin holders, connector block, etc., including 8 W - 1 No LED T8 tubular lamp with in built driver with all accessories and connecting up with 3 core 0.5 Sqmm copper wire between ceiling rose and fitting terminal complete including taking down old light fittings all as specified and directed. Make: (i) Cat Part No. : DMLN1LT8-8 of Crompton for fitting or equivalent model in Havells/Philips/Bajaj/Wipro (ii) Cat Part No. : LTT8-8 of Crompton for LED tube light or equivalent model in Havells /Phillips /Bajaj /Wipro

S & F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting all as specified and directed.

S & F 10 Watts LED lamp type B22 all as specified and directed.

Supply and fix in repairs 35 W LED street light fitting for aluminium pressure die cast aluminium housing for long life pure polyester powder coated dark grey housing high efficiency long life LEDs high purity PMMA lens for superior performance toughened glass with silicon gaskets for IP-65 protection complete assembly with LEDs driver and accessories pre-wired up to terminal block in built integrated electronic LED driver including suitable external pole of dia upto 55mm and bolt, nut and clamps etc., luminaire lumen output 3500 Lm including fixing brackets made of GI pipe with twin core cable 0.75 Sqmm complete all as specified and as directed. Make: Cat Part No. : ENDURACITYLITEPLATPLUSSL35WLED 757SASYBOPC of Havells or equivalent model in Crompton/Philips/Bajaj/Wipro

S & F communication modules for TV socket sap Code No. ACMKTWW000 including suitable flush mounting terminal box all as specified and directed.

Taking down existing energy meter carefully, disconnecting incoming and out going electric wire connection and keeping in safe custody including recording down the Sl No, meter reading, and Qtr No/ circuit No to the meter complete all as directed

Supply, installation, testing and commissioning of factory made meter panel board of size length 1.2m, height 1.04m and depth 0.35m suitable for wall mounted / floor mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of transparent Acrylic sheet for meter reading, space for refixing of single phase KWH meter - 02 Nos and TPN DD DB - 01 No., AC 415 Volts incl lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, epoxy powder coated spray paint with primer, CPRI type tested complete all as directed. (For P/11)

Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of transparent Acrylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -07 Nos AC 230 Volts incl lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:- Incoming (a) MCCB 100 amps 04 pole, 415 Volts, 16 KA - 01 No (b) Surge protection device class - II (T-2) low votage 4 pole 40 KA complete all as directed. (c) R-Y-B phase LED indicating lamp-03 Nos (d) Copper wiring in panel of suitable size (e) 200 Amps TPN copper busbar Out going (a) MCB 63 Amps SPN, 230 Volts, 10 KA -06 Nos (b) MCB SPN 06 Amps, 230 Volts, 10 KA-01 No (c) Re-fixing existing electric meter - 07 Nos (Note: To be ensured properly matching the qtr Nos before fixing the electric meter) (For P/18)

Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of transparent Acrylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -05 Nos AC 230 Volts incl lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:- Incoming (a) MCCB 100 amps 04 pole ,415 Volts, 16 KA - 01 No (b) Surge protection device class - II (T-2) low votage 4 pole 40 KA complete all as directed. (c) R-Y-B phase LED indicating lamp-03 Nos (d) Copper wiring in panel of suitable size (e) 200 Amps TPN copper busbar Out going (a) MCB 63 Amps SPN, 230 Volts, 10 KA -04 Nos (b) MCB SPN 06 Amps, 230 Volts, 10 KA-01 No (c) Re-fixing existing electric meter - 05 Nos (Note: To be ensured properly matching the qtr Nos before fixing the electric meter) (For P/12 & P/13)

Supply, installation, testing and commissioning of factory made meter panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of transparent Acrylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -04 Nos AC 230 Volts incl lugs, spacer mounting channels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, suitable compartment of every meter and control MCB circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as directed including the following accessories:- Incoming (a) MCCB 100 amps 04 pole, 415 Volts, 16 KA - 01 No (b) Surge protection device class - II (T-2) low votage 4 pole 40 KA complete all as directed. (c) R-Y-B phase LED indicating lamp-03 Nos (d) Copper wiring in panel of suitable size (e) 200 Amps TPN copper busbar Out going (a) MCB 63 Amps SPN, 230 Volts, 10 KA -03 Nos (b) MCB SPN 06 Amps, 230 Volts, 10 KA-01 No (c) Re-fixing existing electric meter - 04 Nos (Note: To be ensured properly matching the qtr Nos before fixing the electric meter) (For P/14)

M&L for Earthing complete with galvanised iron earth plate electrode of size 600mm x 600mm x 6.15mm thick buried directly in ground vertically to a depth not less than 2.25 metre deep below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level connected to and including galvanised earth wire 4mm dia (upto 7.5mtr length) as earthing lead fixed by means of bolts, nuts, check nuts, washer of galvanized iron and connected to main switch and including GI pipe light grade 20mm bore protection pipe & necessary excavation and earth work in any strata, PCC chamber in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab, 50mm thick with 8mm dia TMT bars @ 100mm C/C both ways, with lifting handle, watering pipe of GI medium grade 20mm dia, wire mesh, funnel, lugs charcoal, salt etc all as applicable and as per plate No 3 of SSR Part-I connected to earthing test point including taking out old earthing materials and all as specified and directed and testing on completeion. Note: The contractor should note down the ER values and obtain signature from user and submit to the department.

SCH 'A' PART-III (EXTERNAL ELECTRIFICATION) Taking down carefully aluminium LT UG Cable of any size, type and capacity complete all as directed. Note: Earthwork shall be measured and paid for separately

Supply, laying, jointing & testing of XLPE Insulated, armoured, heavy duty electric LT UG cable 1100 Volts grade with multi stranded aluminium conductor of cross-sectional area 35 sqmm, 3.5 core laid in trenches or in duct/passed through pipes or fixed to wall/poles etc complete all as specified and directed. Note: Excavation & Earthwork, Cable protection & Sand cushioning shall be measured & paid separately.

Excavation in trenches n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation for poles, stay, laying cables etc and getting out in hard/dense soil complete all specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exeeding 25 cm in any type of soil all as directed.

Removing the excavated soil to a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point all as direced.

Supply and spread dry river sand in trenches for cable cushioning on both top and bottom of cable including ramming all as specified and directed. Note :- For the purpose of payment the punned thickness only shall be measured

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate for pathways, hard standing & pole coping including necessary formwork and applying two coats of white wash on exposed surfaces etc complete all as directed.

Supply and laying sub class B brick for cable protection, laid dry and flat adjacent to each other complete all as specified and directed.

Supply and fixing in repairs GI tubing light grade 50 mm dia for cable protection fixed along with steel tubular pole/RCC pole /laid under roads, crossings, culverts etc., including necessary clamp, nut, bolt, washers etc all as directed at site.

SCH 'A' PART-IV (EXTERNAL WATER SUPPLY) Taking down GI tubing of any type, any capacity all as specified and directed. Note: Earthwork shall be measured and paid for separately

Taking down Gate valve of any type, any capacity all as specified and directed.

Supply and laying GI tubing medium grade (ISI marked) 50 mm bore laid in trenches including all fittings such as bend, tee, union, elbow etc., complete including testing all as specified and as directed.

Supply and laying GI tubing medium grade (ISI marked) 25 mm bore, fixed on wall including all fittings such as bend, tee, union, elbow etc., complete including testing all as specified and as directed. Note: Rate quoted is deemed to include cutting of wall wherever required as per site requirement.

Supply and laying GI tubing medium grade (ISI marked) 15 mm bore, fixed on wall including all fittings such as bend, tee, union, elbow etc., complete including testing all as specified and as directed. Note: Rate quoted is deemed to include cutting of wall wherever required as per site requirement.

S & F gate valve of size 50mm cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed all as specified and directed.

S & F gate valve of size 25mm cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed all as specified and directed.

Excavation in trenches n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation for poles, stay, laying cables, pipe line, etc and getting out in hard/dense soil complete all specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exeeding 25 cm in any type of soil all as directed.

Removing the excavated soil to a distance not exe 50 m and depositing where directed at a level n exe 1.5 m above the starting point all as direced.

C R R CONSTRUCTIONS

VARGHESECHACKO AND CO

M/s JAYPEE ENTERPRISES

Gnani Builders