CIVIL, INTERIOR AND ELECTRICAL WORK FOR 5G PHASE II PROJECT

Amount

Section A ( Civl & Interior Work)

Providing & Fixing double skin aluminum partition with pre fabricated board and glass panel along with beading, gasket cover etc. all complete.

P/Fixing 12 mm frame less toughened glass door with top & bottom rail along with all fixing arrangements

P/Fixing frosted glass film over the glass in Aluminium frame in matching pattern from approved brand & manufacturer all comp.

P/F hydaulic double action floor spring along with necessary cutting of floor, grouting, levelling etc. with stainless steel plate cover all complete.

Providing & fixing 2mm thick three layer anti static flooring with copper base strip at the indicated location in IX(SF).Lab

Dismantling & re-fixing existing aluminum partitions in Labs, Piller Boxes with Particle board and glazing etc. Matching with existing pattern.

Re-Fixing 12 mm frame less toughened glass door with top & bottom rail along with all fixing arrangements

P/F Sound insulation work with wooden Frame in 45 mm x50 mm teak wood which will be self-standing structural member. Grid size shall be 600 mm x 600 mm complying with anti-corrosive treatment fixed with floor as well . Acoustical board of 9 mm thickness shall be fixed on G.I. frame Wooden grid system (Over walls) specially designed for Acoustical vibration management with a cavity of 50mm filled with Rock wool/ Glass wool of specified density(48-60 Kg/ Cum approximately), specifications all complete.

Providing/Fixing aluminium door handle with anodised tubeler section.

Provding/ Fixing brass lock with complete safety provision in the door

Providing and fixing White board of size 5'x3' thickness not less than 8 mm, back coated with approved shade and colour.

Providing & fixing Vertical blinds on the glazing wall to protect sunlight along with necessary fittings & fixtures and approved make.

Providing moduler work station L type shape for single user 2m x2m along with working platform, pin board, white board, storage unit, CPU trolly etc. all comp.

Refixing of existing moduler work station along with working platform, pin board, white board, storage unit, CPU trolly etc. After removing/ trasporting to desired location all complete

Providing and fixing special quality wooden teak wood 750 mm deep cupboard or ward robe with approved quality including necessary screws & handle and locks etc. complete

Painting with acrylic emulsion paint over the prepared surface in two coats to make it smooth

Providing and applying 2 mm thick plaster of paris putty over the plastered surface to make it even all comp.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 of approved make, in all colours, shades in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying vitrified floor tiles laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm, however it may vary as per requirement.

Half brick masonry with common burnt clay F.P.S. Bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand

Wall mounting glass partition 900-700 mm x 1000mm x 10 mm required for patitioning at uranal side.

Plumbing work for wash room(Ladies & Gents). Providing & fixing following washroom fixtures of approved brand

P/F Jet Spray

P/F Steel Jali

Towel Road

Pillar Cock

P/F Basin Mixer

P/F Urinals of approved brand.

P/F Water Closets

Bottle Trap

Soap dish holder

Flush Valve

Toilet paper holder

Section B (Electrical Work)

Nema/ Industrial Connector 20A/25A Female Set to be fixed on wall, with MCB and Box, Male to be fixed on Cable.

8 Moduler Box with Face Plate (Single Line), Makes : Anchor/ Polycab/ Roma/ Crabtree

10 Moduler Box with Face Plate (Single Line), Makes : Anchor/ Polycab/ Roma/ Crabtree

1 Modular Switch 20A,, Makes : Anchor/ Polycab/ Roma/ Crabtree

2 Modular Sockets 6A-16A, Makes : Anchor/ Polycab/ Roma/ Crabtree

1 Modular Blanker, Makes : Anchor/ Polycab/ Roma/ Crabtree

Flexible PVC Condutes 1" ISI

Batten 1" ISI

Batten 1.5" ISI

Trip Box with Industrial Power Socket 20A with Male Counter Part & 2 Pole MCB 20A for A/C input, Make L&T, Anchor, Schindler, Havels

Single Pole MCB 10A/16A/20A/25A

2 Ploe MCB 16A/20A/25A

Cu 2.5 sqmm Single core Flexible 1 each Black & Green, Make - Finonlex/ Polycab/ KEI/ L&T

Cu 2.5 sqmm Single core Flexible 1 each R, Y & B , Make - Finonlex/ Polycab/ KEI/ L&T

TPN 4 Way with one 3P+N Isolator 63A & 12 SP MCBs 20A/ 16A, TPN Makes : ABB/L&T/ Havells, MCB Makes: Schneider/Havells/Finolex

4 Core Flexible Copper Cable 10 Sq mm , Make - Finonlex/ Polycab/ KEI/ L&T

Single Core Flexible Copper Cable 10 Sq mm Green , Make - Finonlex/ Polycab/ KEI/ L&T

3 Core Flexible Copper Cable 4 Sq mm , Make - Finonlex/ Polycab/ KEI/ L&T

Supplying and installing 300 mm x50 mm x 1.6 mm size of porforated painted with powder coating M.S. cable trays with porforation not more than 17.50% in in convenient sections jointed with connectors, suspended from ceiling with M.S. suspenders including bolts & nuts , painting suspenders etc. as required

3 Core flexible Copper Cable 2.5sqmm, Make - Finonlex/ Polycab/ KEI/ L&T

Multi Purpose Combo Box 3 Pin 6A/16A Switch & Socket

CAT-6 Cable for Ethernet 1 Roll=305 Mtr

Ethernet Port Gangbox with Face Plate & IO Port

Finger+RFID Card Biomatric Access Control System for 7 Labs/DC with centralized server based data management

M/S JAI KUMAR

Lalan Interiors

First Edge Infra

E-VERVE DESIGN