Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹86.6 L
EMD Value
₹86,600
Closing Date
30 Mar 2023, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE EDC-II ALIGARH
ALIGARH
EDC2A-52/2022-23
2023_DVVNL_785303_2
EDC2A-52/2022-23
Open Tender
Electrical Works
Turn-key
90 days
JALALI (ALIGARH)
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
DVVNL AGRA WEBSITE
₹86,600
30 Mar 2023
22 Mar 2023
30 Mar 2023
22 Mar 2023
30 Mar 2023
22 Mar 2023
Amount
ST Pole 11 Mtr. Long
PCC Pole 8.5 Mtr. Long
Stone Pad (300x300x75 mm)
Top channel (125x65x2240mm)
Dropper channel (100x50x2028mm)
11 KV Pin insulator with pin complete
11 KV Disc insulator with fitting
M.S. Angle (75x75x6x2028mm) (T/F Base)
M.S. T-off channel with clamp B&N (100x50x1300mm)
F-Bracket for fitting top channel
Holding Clamp for TPMO & Fuse Set with bolt nut
Number Plate with clamp N&B
Danger Board with clamp N&B
Stay Set Complete with grouting
Earthing Rod Complete
Distribution Box with clamp
ABC 3x95 + 1x70 + 1x16 Sq.mm.
P.G. Clamp
Insulator suspension clamp with I Hook
Dead & Clamp with I Hook
LT Insulator Pearsing connector
Bolt, Nut & Washers
11/0.4 KV 100 KVA Transformer
11/0.4 KV 250 KVA Transformer
LT Cable size 3.5*x150 Sq.mm.
PVC Cable 3.5*x 240 Sq.mm.
PVC Cable 3.5*x150 Sq.mm.
Cable Al. 3x120 Sq.mm. XLPE Cable 11 KV
11 KV XLPE Cable O/D Cable Jointing Kit for 3x70 Sq.mm.
Barbed wire G.I.
Phase wire ACSR Weasel Conductor
Red Oxide Paint
Aluminium Paint
Aluminium Tap
5 MVA 33/11KV Power Transformer with accessories
33KV Bus Isolator
Structure for 33 kV Isolator with Plinth & foundation
33KV Lightning Arrestor
Structure for 33 kV Lightning Arrester (3 nos.) with Plinth & foundation
33 KV VCB with CT 200/100/1A alongwith structure complete with plinth & foundation
33kV Control panel for Double T/F without differential relay
11 KV VCB Switchgears with Incoming CTR 400/200/5-5A, 350MVA
11 KV VCB Switchgears with Outgoing CTR 200/100/5-5A, 250 MVA
11 KV Bus Coupler 350 MVA
33KV Post Insulator
Structure for 33 kV Post Insulator (3 nos.) with Plinth & foundation
11 KV 3 Core Al. XLPE Insulated 3x300 mm sq. Cable
11 KV 3 Core Al. XLPE Insulated 3x120 mm sq. Cable
Control Cable (Copper) 4x2.5 mm sq.
Control Cable (Copper) 2x2.5 mm sq.
90 lbs Rail pieces for transformer 44.64 Kg/M
Body and neutral earthing of following L.T. distribution Transformers installed by digging of pit up to water level depth (approx. 100’) and then inserting 1-1/4" dia G.I. pipe of "B" grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 50x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer including the cost of arrangement of all material, labourer, T&P, carrier etc. required for proper completion of work.
11/0.4 KV 250 KVA Transformer
Power Transformer Plinth of size 3.46x4.46 Mtr.having 0.5 Mtr. below ground level and 0.4 Mtr. above ground level.
Indoor earthing of equipments in control room
Outdoor equipment earth mat
Chemical Pipe earthing as additional earthing (for T/F, LA, CT & PT) with GI Strip (50x6 mm)
11KV XLPE Cable (3x300 Sq.mm.) Heat Shrinkable Jointing kit boxes mounted with switchgears and transformers.
11KV XLPE Cable (3x120 sq.mm.) Heat Shrinkable Jointing kit boxes mounted with switchgear Indoor.
11KV XLPE Cable (3x120 sq.mm.) Heat Shrinkable Jointing kit Outdoor
24 Volt Battery & Battery Charger Set
Construction of following Transformer of Plinth of size 5’x5x4’ above ground level and one ft. below the ground level of 9”. After excavation of 4” earth, brick ballast shall be provided and rammering will be done properly after that a retaining wall of 9” width by first class brick in ratio 1:4 of cement and sand shall be made. The earth shall be filled up to one ft. below the top of the plinth. After this brick ballast shall be provided up to 6” from the earth level and proper rammering shall be done. One No. jall of 12 mm M.S. tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement, sand and stone ballast shall be laid on the top of the Plinth. The 12 mm thick plastering shall be done all around the plinth in 1:4 ratio of cement and sand. The contractor shall be responsible to complete the work as per direction of Supervising Engineer. It including the cost of all material, labour T&P, carrier etc. required for proper completion of work.
11/0.4 KV 250 KVA Transformer
FABRICATION & ERECTION OF FENCING AND CONSTRUCTION OF RETAINING WALL AROUND FOLLOWING CAPACITY T/F The complete 11/0.4 KV Substation shall be provided with two meter height fencing and retaining wall around the substation. One No. Gate with proper locking arrangement for entry of personnel shall also be provided. The fencing shall be made of 50x25 mm x10 SWG rectangular welded mesh of wire mesh in length. Wire mesh shall be fixed on panels made of 50x50x6 mm M.S. Angle. The wire mesh on panels will be supported by 25x3 mm M.S. flat on all the bracings diagonally and 50x6 M.S. Flat horizontally at the center of the panel. The panel will be joined by bolts & nuts of appropriate size with each other and on the main support on corners including supply of all material, labour, carrier and T & P etc. required for proper completion of work. The painting of complete fencing shall also be done with one coat of red oxide primer and two coat of synthetic green paint. For construction of retaining wall around the fencing, excavation of earth shall be done in foundation in ordinary soil including disposal of surplus earth at some suitable distance. The dimension of excavation shall be 1m wide, 0.45 m deep and suitable length as per wire mesh. After excavation of earth a cement concreted pad shall be laid in foundation. Concreting shall be done with Ist class brick ballast, coarse sand and cement in proportion of 8:4:1. First class brickwork shall also be done in foundation and super structure in 1:6 Cement and coarse sand including necessary cutting and moulding of bricks in foundation depth of wall 0.30 m, thickness of wall 0.35 m & superstructure brick work thickness of wall 0.23 m & depths 0.30 m including supply of all material, labour, carrier and T & P etc. required for proper completion of work.
11/0.4 KV 250 KVA Transformer
Demounting & carriage of following capacity transformer due to overloaded including the work of its loading & unloading, dragging etc. and also including the cost of labour and T&P etc. required for proper completion of work.
11/0.4 KV 100 KVA Transformer
11/0.4 KV 63 KVA Transformer
Dismantling and removal of existing conductor/cable/GI Wire from the various area preparing their coils and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work.
ACSR Weasel Conductor
Concreating of Pole
Guarding of 11 KV line by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 Mtr. as per RESPO manual and also including the cost of arragement of labour, T & P etc. required for proper completion of work.
Safe carriage of Old line material viz. Conductor, G.I. Earth wire, ABC conductor, Cross Arm, Angle, Channel, Insulators, Clamps & other line material from any other place or from site of work to the work of its loading & unloading at the respective ends including the cost of labour, T&P and carrier etc. required for proper completion of work.
Chopping of tree branches which are touching to HT/LT lines.
Tree cutting Choping work at inside substation
Plinth and Foundation Of 33 KV VCB
Laying of 11 KV XLPE cable UG includnig cost of sand and bricks by open tranch Method
Painting of indoor equipments
Painting of S/s structure
M/S SSR ELECTRICALS PVT LTD
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .