RENOVATION/ REPAIR OF OFFICER MESS COMPLEX SUMRAN LINE OF 6 SIKH, PROVN OF IRON GRILL AT REGIONAL CENTRE-II AT ECHS, INTERLOCKING TILES IN GARUDA SARATH CAMP AT SUDAN LINES AND KOTA STONE IN STAIRCASE PORTION IN MD ACCN OF BLDG NO P-52, 47, A-39 AND

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified tiles (Double charge) light Shade 10mm thick (square/rectangular) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified.

M&L Coloured glazed ceramic rectified tiles 600 mm x 1200 mm x 10 mm thick as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Coloured Glaze ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 10mm thick rendering in CM 1:4 complete all as specified. (Make : Kajaria, Johnson or equivalent)

S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center to center/ Intermediate channel 0.9 mm thick having to equal flanes of 15 mm each and web of 45 mm suspended from soffit at approx x 900mm center to center with GI cleat and steel expension fastners with and including ceiling section ( not exc 1.2m length ) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.50 mm fixed to the intermediate channel at 457 mm center to center. Including Hangers 6mm dia GI up to 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI Flat 40x3mm size 60mm long and expansion hold fastners 12.50 dia. 40 mm long complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) including sunk or raised mouloding complete all as specified and as directed.

S &F Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class hard wood fillets, or metal frame and work with GI wire mesh( fillet, Metal frame work and GI Wire mesh paid seprately) complete all as specified and as directed.

M&L for Aluminium composite panel of 3 mm thick ext grade in wall /column panelling /cladding with PVDF coating over alumium frame of section 37.5x25 mm x1.6mm (16 guage) plain & coloured sheet in wall cladding steel gate or gate pillar and similar work cut to size holes punched including round headed screws clout nail or rivetes and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams including benoing or turning up mitred angles etc as required complete all as specified and directed.(Colour/Texture/pattern as approved by Engr-in-Charge.)

Dismantling of Stone slab and tiles of any description or thickenss in floors, approans etc laid, bedded and pointed in any mortar complete all as specified and directed

M&L Granite of 22 to 22mm thick with uniform texture (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing with white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makrana doogri green colour stone for Kitchen cooking platform laid over and including 15mm thick screed bed in cement mortar (1:6) polishing bevelled edges of corner etc complete all as specified and directed.

All as per serial item No 10 above but on vetical surfaces including 15 mm thick rendering in cement mortar 1:4

Supply and fabrication of kitchen cupboards, shelf, shutter, partition etc made up of 18mm HDHMR board (Century/ Action Tesa/Kitply) with both side company pasted lamination (Colour to be approved by Engr-in-Charge) duly lipping (edge bending) on exposed surfaces complete with G profile handle of approved colour (01 No for each shutter) and soft closing hinges (02 Nos in each shutter) (Hettich/ Godrej/ IPSA) incl dismantling existing unserviceable boarding and thrown away from MOD area complete.

Demolition of cement concrete (reinforced) of any position not otherwise specifically provided for and including reinforcement required to facilitate demolition upto and including fourth storey and on the roof top/mumty/parapet and removal of debris and rubbish out side MoD land complete all as specified and directed.

Form work to soffit of suspended slabs such as roof slabs, floor slabs, landings and similar work, n exc 200mm thick (horizontal or sloping) complete all as specified.

Formwork to chajjas, chullah hoods, similar items including edges all as specified.

S&F TMT bars upto 10mm dia and over, cut to length, bent to shape required,including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for design mix RCC M-25 (20mm graded aggregate) as in beams, lintels etc all as specified & directed.

M&L for design mix RCC M-25 (20mm graded aggregate) as in chajjas etc all as specified & directed.

M&L for design mix RCC M-25 (20mm graded aggregate) as in slab type Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

S&F in repairs 15 mm bore double Angle valve (two way) cast copper alloy fancy type Chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed .

S&F in repair 15mm bore bib taps cast copper alloy of Chromium plated high pressure screwed for iron pipe and fixed etc. complete all as specified and directed.

S&F CP health faucet with 1.00mtr long CP flexible pipe complete all as spd and directed

S&F Vitreous china wash down water closet pan Wall hung WC with PP seat cover, size 575x360x360 complete with accessories, including 10 lit capacity flushing cistern (cancealed in wall) and fixed with brass screw complete all as specified and as directed.

S&F in repair PVC connection 15mm sizes with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repairs 15 mm bore Angle valve cast copper alloy Chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and directed .

Taking down cement plaster any description on brick or stone walls,ceiling etc including raking out joints hacking for key including scrubbing down, watering etc and removal of rubbish from the premises as directed.

M&L 10-12mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

M&L for preparation of new/old plastered surface of wall and applying two coat of plastic emulsion paint over a coat of primer and wall care putty 2-3mm thick incl removal of existing treatment by scrapping down with mechanical grinder complete all as specified and directed.

All same as per Srl item No 28 here-in-before but on ceiling

M&L for preparation of new/old decorated external wall surface by complete removal of existing treatement by mechanised sander of Berger paints or equioovalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechincal removeal is not possible and applying a layer of 2 mm thick wall care putty, again sand papering thus making surface smooth and applying two coat of wheather proofing exterior acrylic emulsion paint premium quality over a coat of primer complete all as specified.

S&F fancy type Curtain rods decorative type stainless steel 25mm nominal dia of approved quality (3mm wall thickness) including fixing of two number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 1.80m long) complete all as directed and specified.

Supply and fixing steel water tubing 'medium grade’ galvanized 15 mm bore with all fittings and fixed complete to walls and ceiling and joints fixed properly including taking up or down steel tubing and connections complete all as specified & directed.

All same as per Srl item No 32 here-in-before but 20 mm

Demolition of brick work built in cement mortar in any description and position complete all as specified and directed.

M&L for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks straight or curved on plan to any radious in half brick thick wall built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MOD land), complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base for floor complete all as specified and directed.

M&L for glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 20 mm thick screed bed in cement mortar in (1:6) complete all as specified and as directed by Engr-in-charge.

M&L Kota stone slab 20-25 mm thick with uniform texture in floor with laid over and including 15 mm thick screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed..

M&L kota stone slab with uniform texture of 20-25 mm thick in treader of steps, riser of steps, skirting, dado and pillars in one single piece (size decided by Engineer-in-Charge) laid over and including cement screed 15mm thick in cement morter 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing , bevelled edge of corner etc complete all as specified and directed.

Dismantling existing water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site complete all as specified and directed.

S&F rotational moulded polythylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve of high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball and screwd for iron pipe 20mm bore omplete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, single layer complete all as specified and directed. (Note : All roots of plant on either on wall or roof to be removed and making good the disturbed surfaces. The unit rate quoted shall deemed to be included for the same)

M&L Screed bedding 20mm thick plaster in CM 1:4 on roof finished even and fair using integral water proofing admixtuire.(Note : Supply only water proofing admixture shall be measured and paid separately) complete all as specified and directed .

Supply only liquid water proofing compound complete all as specified and directed.

M&L Cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in roof levelling complete all as specified and directed

Applying evenly a coat of bituminous primer conforming to IS- 3384 @ 0.30Ltr/Sqm. Over the primed surface, apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. Applying APP based polymeric membrane minimum weight 3.50kg/Sqm and of minimum thickness 3mm, reiforced with polyster non woven fabric ( weight not less than 150gm/Sqm ). APP membrane will be laid by torching overlaps with a propane or butane gastorch and laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. (Note : (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authorised Applicator shall be approved by GE before starting of work. (3) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Ten years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

M&L aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock & double action floor door spring heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

M&L Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.

Dismantling of Cast Iron pipe up to 100 mm bore complete all as specified and directed.

S&F Sand cast iron soil waste and vent pipes 100mm bore, in any length, with cement joints, laid in trenches/floors/wall with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed.

All same as per Srl item No 32 here-in-before but 75mm bore.

S&F CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

S&F CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed, in any length, with rubber rings fixed to walls or laid in floors/trenches complete all as specified and directed

S&F PVC (SWR) bend bore 110mm any radius provided with access doors complete all as specified and directed.

S&F Continuous piano hinges stainless steel width of flaps (when open) 30mm complete all as specified and directed.

M&L preparation of old wooden surface and applying two coat of synthetic enamel paint complete all as specified and directed by E.I.C.

S&F oval type Brass handles, cast type,polished bright 150mm size.

M&L for 100mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-Charge.

S&F Magnet ball catcher brass body with 8mm dia steel ball of approved qualities complete all as specified

S&F 150mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F MS angle iron, pipe, tube (Square/rectungualr) etc as in rafters, purlins ,ladder etc.complete all as specified and directed by Engineer-in-Charge.

S & F Brass CP basin mixer in repair for mixing hot & cold water screwed down for iron pipe 15 mm bore, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed. (Make : Hindware/Jaquar/Cera)

S&F in repair stainless steel sink with drainage board of 1 mm thick kitchen, bedding in cement mortar to dwarf wall or fixingwith cantilever brackets overall size495mmx 420mm bowl size 410mm x330mm x160mm etc incl CP waste fittings and PVC waste pipe compete all as specified and directed. (Make: Hindware or equivalent)

S&F in repair CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste, complete all as specified and directed.

S&F in repair Gun-metal globe or gate valves 20mm bore with iron wheel head, screwed both ends for iron iron complete all as specified and directed.

S&F 15 mm dia Ball brass valves, high pressure, with polythene float and fly- nut com-plete, scre-wed for iron pipe or brass ferrule , plastic ball screwed for iron pipe and fixed complete all as specified and directed.

M&L Preparation of old steel surfaces of any description over 10cm in width or girth,not otherwise specifically and applying two coats of synthetic enamel paint complete all as specified .

S&F in repair cast iron floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

M&L providing and applying high quality acrylic modified resin based texture of finetex Caneweave Torrent silver M105 with anti alage and UV resistance property to be applied as in intermediate finishes in desired pattern @ 43.04 kg/10 sqm to form film of 1 - 1.50 mm thickness after scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces and applying coating with premium acrylic smooth exteriorpaints with Silicone additives of required shade by two or more coat @ 1.43 Ltrs/ 10 sqm over and including one coat of premium quatity primer. Complete all as specified and as directed.

M&L for 10 mm thick tinted toughned glass window including all fitting and acceessories with stainless steel brackets, as per approved design complete all as specified.

S & F Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe 15 mm bore, screwed down high pressure, screwed for iron pipe and fixed complete all as specified and directed. (Make : Hindware/Jaquar/Cera)

S&F in repairs cast copper alloy CP toilet paper holder with flap fixed with plug and brass screw completed all as specified .

S&F in repair 32/40mm dia waste pipe 610mm long suitable for WHB or Sinks etc complete all as specified and directed by Engineer-in-Charge

M&L frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hingese, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid separately) complete all as specified and directed

M & L framed work such as grills, grating ,Railing ,Gate,,etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 290-0 or E-165 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

S&F for Collapsible steel gates, top hung,consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed

M&L rendering 15mm thick in CM 1:6 on brick masonry or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick in CM 1:4 on brick masonry or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old plastered surfaces of walls and applying two coats of Oil bound distember over one coat of primer and 2mm thick wall care putty complete all as specified and directed.

All same as per Srl item No 86 here-in-before but after complete removal of existing treatment.

M&L Cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in bed blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed upto two storey height.

Cutting holes in brick wall built in CM for inserting hold fast and exc half brick but n exc one brick making good dismantled portionin CM (1:3) or cement concrete (1:2:4) type BO as required

M&L for providing reinforced cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in kitchen slab,window cill, Chajjas, lintels complete all as specified and directed.

M & L preparation of new surfaces of steel any description not otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of Red-oxide Primer complete all as specified and directed by Engineer- In- charge.

Aluminium (die cast) body door closer hydraulically regulated designation No 2 universal type suitable for door shutter of 701 to 851mm in width and of weight between 36 to 60 kg, fixed in repairs, complete all as specified and as directed.

S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed in repair complete all as directed and specified.

S&F for Mortice latch with two levers (vertical type), 75 mm brass body fixed in repair complete all as directed and specified.

Taking down chowkhats or frames with shutter (without taking off shutters) not exceeding 1.5 Sqm each complete all as specified and directed by Engineer-in-Charge.

Providing and fixing false ceiling at all height with GRG(Glass Fibre Reinforced Gypsum) False ceiling tiles of size 595x595mm of approved texture design and patterns having moisture content less than 2%,humadity resistance of 99%,NRC 0.85(with 50mm thick glass wool) as per IS 8225 :1987,Non combustible as per BS 476 (part-4)-1970 and light reflectance of 75-85% to be laid in true horizantal level suspended on inter locking metalT-grid of hot dopped galvanised iron section of 0.3 mm thick (galvanised@120grams per sqm including both sides) comprising of main -T runners of size 24x32 mm of length 3000mm.cross-T of size 24x26mm of length 1200mm and secondary intermediate cross T of size 24x26 mm of length 600mm to form grid module of size 600x600mm,suspended from ceiling using galvanised mild steel items(galvanised@80 grams per sqm) i.e 50mm long,8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl pluges at 450mm centre to centre and 40 mm long dry wall stainless steel screws, incl dismantling existing false ceiling & removing from site complete all as specified and as directed.

M&L hacking out old broken glass (any thickness and size quality or description from wooden frame glazed with putty,metal frame including punching or drilling out old glazing pins/spring clips) complete all as specified and directed by Engineer-in-Charge.

M&L 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in squares exc. 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Surface excavation n exc 30cm deep and averging 15 cm deep and getting out in soft/loose soil and removal upto 250 Mtr distance.

M&L 75 mm thick for hard core broken stone or builders of guage not exceeding 63 mm deposited spread & leveled in layer not exceeding 15cm thick,watered and rammed to a true surface complete all as specified and directed by Engg-in-charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment as approved by GE.

M&L for sand filling under floor or in fdn including watering and consolidation.

M & L for Providing, cement concrete 1:2:4 Type B1 1:2:4 (20 mm graded aggregate) in roof kerbs of mud stops, rounded or chamfered on edges.

Taking down copper /aluminium point wiring (light ,fan,socket or power) complete including fixture and fitting and fitting such as switches, ceiling rose, pendent holder, regulator and socket light fitting etc and making good complete all as directed.

Material and labour of point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated sheathed and multistranded copper conductor cable ISI marked in existing PVC concealed conduit and FRLS PVC insulated unsheathed 1.5 Sqmm copper conductor mulistranded earth wire, connecting to common earth dolly in existing Metal flush box and existing modular cover plate complete all as directed for the following.

One light point/fan point/wall fan point/bell/buzzer controlled by one 1-way switch/bell push.

Additional light on same point controlled by the same switch ( 3 runs of 1.5sqmm wire shall be measured as one run)

For socket outlet 5 amps on the same board with other switches,

All as per srl item No. 105 here-in-before but for socket outlet point 5 amps on the independent board.

All as per srl item No. 105 here-in-before but with 2.5 sq mm as main wire and earth wire on the independent board.

S & F Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

S & F modular socket two-in-one, 6 Amp universal type, 02 module size complete all as directed.

S & F modular Socket, 16 Amp, multipurpose type, 02 module size complete all as directed.

S & F Modular switch 16 Amp, 1 way, 1 module size with indicator lamp complete all as directed.

S & F Modular Fan regulator step type ,120 watts, single Module size complete all as directed.

Supply and fixing in replacement LED tube light fitting, 20 watt. wall mounting type with and including all electric connections with two core PVC insulated, PVC sheathed copper conductor flexible cable complete all as directed.

Supply and fixing in replacement LED ceiling/Recess light fitting 15 watt, in round/square shape, surface type and making all electric connections complete all as directed.

Supply and fixing in replacement LED ceiling/Recess light fitting 20 watt, in round/square shape, surface type and making all electric connections complete all as directed.

Supply and fixing in replacement LED ceiling/Recess light fitting 10 watt, in round/square shape, surface type and making all electric connections complete all as directed.

Supply and fixing in replacement LED mirror light fitting 10 watt and making all electric connections complete all as directed.

Supply and fixing in replacement of fancy wall light fitting mettallic golden frame with B 22 base holder complete all as specified and as directed.

Supply and fixing in replacement of LED Bulk head light fitting 6.5 W, 230 V complete with all accessories all as specified and as directed by engineer in charge

Taking down ceiling fan and dismantling blades and removing fan and blades to deposited E/M store yard complete all as specified.

Fixing only ceiling fan and connecting up including provision of cable from ceiling rose to ceiling fan complete all as specified

Supply and fixing in ceiling fan 1200mm sweep , copper winding ,240 volts.50hz BEE star rating 5 service value not less than 6.0 with BLDC motor suitable for regulator and taking out old unserviceable fan and depositing to MES store yard complete all as directed

Supply & fixing in replacement of ventilating fan of size 200m sweep plastic body including louver and making all electric connections complete all as specified and directed.

Supply & fixing in replacement of ventilating fan 250mm plastic body type including self cosing louver and making all electric connections complete all as specified and directed.

S&F Exhaust fan 380mm sweep single phase metalic body type ,and making all electric connection and taing out old unserviceable and depositng the same to MES store yard complete all as directed

S & F of decorative metallic body in golden frame LED picture lights 10/12 watts and making all electric connection complete all as directed.

Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.

Taking down old u/s sub main of any size complete all as specified and as directed.

Material and labour sub main wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm as earth wire of similar specification in existing conduit complete all as directed.

Material and labour submain wiring complete with 2 x 6.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6 sqmm as earth wire of similar specification in exisitng conduit complete all as directed.

Taking down old u/s cable any size complete all as specified & directed

M & L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3.5 Core specified and as directed.

Excavation in trenches in loose/soft soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep and getting out including forming bottom surface for laying LT cable as specified and as directed

M&L for sand cushioning to under ground cable provided with layers of sand(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and as directed.

Removing exccavated soil not exceeding 50 mtr and depositing wheredirected at a level not exceeding 1.5 mtr above the starting point complete as specified and as directed.

Returning filling in soil including spreading, levelling, watering and well rammingin layers not exceeding 25 cm complete as specified and as directed

Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed.

S&F Galvanised Steel Water tubing medium grade of size 40mm bore with all fittings.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. Complete all as specified and as directed.

Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, VTPN 04 way, 240 volts with bus bar rating 400 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.

S&F in replacement of MCB DB confirming to IP 43 - IK 09 with double door, SPN 12 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

S&F in replacement of MCB DB confirming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.

Supply and fixing in replacement of MCB C Curve type, 10 kA, 40 to 63 Amp, SPN with over load and short circuit protection complete all as directed.

S & F in replacement of MCCB 4P 160 Amp, with breaking capacity 25 KA suitable for 415 volts AC supply, with over load and short circuit protection complete all as specified.

Supply and fixing Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock including taking down the old u/s geryser and depositing to MES store yard complete all as specifed and directed.

Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed.

S & F in replacement of energy efficicent LED fittings 45W LED 6K suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.

Supply and fixing AC to DC adaptor for LED strip light tubular type complete all as specfied and as directed

Supply and fixing Flexible LED strip light tubular type, cool/warm white without adaptor and making all electric connections complete all as directed.

Supply and fixing in replacement of post top lantern light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe with 9Watt LED lamp B22 base including necessary electric connections complete all as specified and as directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25 meters below ground level with top edge of the earth plate at a depth not lesss than 1.5 meter below the ground level, earth plate surrounded 15 cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same, GI plate connected with galvanised iron earth lead of size 4 mm by means of galvnised nuts, bolts and washers, GI wire of 4 mm dia laid in 15 mm dia light grade GI pipe as protection of earthlead and GI pipe 30mm dia medium grade for water with funnel, wire mesh etc from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor).

S&F of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete including cutting chasis in wall and making good the surface all as specified and and as directed.

S&F of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete including cutting chasis in wall and making good the surface all as specified and and as directed.

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

S&F in repair Modular white cover plate with frame 12 module all as directed

S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed

Vipul Construction

M/s Shubh Enterprises