Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Admitted-Finance F 70 PRASHANT VIHAR ROHINI DELHI 110085 PRASHANT VIHAR ROHINI DELHI 110085 NORTH WEST DELHI DELHI 110085 | NORTH WEST DELHI | DELHI | 110085 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹77.3 L
EMD Value
₹1.5 L
Closing Date
23 Feb 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, UWD, GGSIPU SECTOR 16C DWARKA
EXECUTIVE ENGINEER, UWD, GGSIPU SECTOR 16C DWARKA
Various Civil and allied work in GGSIPU
2024_GGSIP_254034_1
40/EE/UWD/2023-24
Open Tender
Civil Works
Works
60 days
EXECUTIVE ENGINEER, UWD
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹1.5 L
23 Feb 2024
16 Feb 2024
23 Feb 2024
16 Feb 2024
23 Feb 2024
16 Feb 2024
Amount
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)
Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes external work
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm nominal outer dia Pipes
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 40 mm nominal outer dia Pipes external work
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes external works
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 25 mm dia
Melamine polishing on wood work (one or more coat).
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
Providing and fixing soil, waste and vent pipes : 100 mm dia Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum,characteristic compressive strength [with ordinary portland cement,,coarse sand and graded stone aggregate of 10 mm maximum size,in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer in-Charge, Note: Rates shall include the providing necessary ground wires etc.,The levelling gauges, if used, shall be paid for separately. Payment,under this item shall be made only after proper wet curing has been,done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument 25mm thick in Grade M 25 with cement content not less than 330 kg per cum
Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum,characteristic compressive strength [with ordinary portland cement,,coarse sand and graded stone aggregate of 10 mm maximum size,in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer in-Charge, Note: Rates shall include the providing necessary ground wires etc.,The levelling gauges, if used, shall be paid for separately. Payment,under this item shall be made only after proper wet curing has been,done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument 50mm thick in Grade M 25 with cement content not less than 330 kg per cum
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface
Supplying,manufacturing ,erecting in postion cement board porta cabins:W A L L S MS Tubular Pipe Thickness will be 38x38 mm And corner pillars with thickness of 63x63mm Inner side Everest fiber cement board of 8mm and OUTSIDE 16mm . Glass wool for insulation thickness of 25 mm, applicable for Heating And soundproofing also GLASS-WOOL is Water proof and fireproof both Superior Attributes-: Moisture Resistant, Fire Resistant, Termite Proof, Weather Resistant, Impact Resistant Indian Green Building Council Member. ROOF :- The roof will be Metro profile Sheet&Thickness 0.5 mm. roof also treated with glass-wool For Heating & Soundproofing FLOOR : - Floor will be verified tiles 2’x2’tile Mat Finished, DOOR : - The Door will be 7’x3’ normal flush Door With SS l drop, finishing and paint work:- outside and inside texture paint everest fiver cement board of 8mm, electrical fittings: Anchor switches & sockets kalinga Prime wiring will be underground with conduit pipe. A. 40 AMP one MCB B. One main switch panel C. fan points and D. Led light 9W 10Unit, INSULATION: - It will be glass wool Heating And Soundproofing, Floor Foundation, Fall Silling Light - 2'x2' (2500x8), WINDOW :-Aluminum slider window 3’X3’ Size, Loading unloading charges Transportation charges will be extra as per location
NARESH KUMAR
G R CONSTRUCTIONS
D.A. CONSTRUCTIONS
Gaurav Construction Co.
C P Singh
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .