AR MO to residential building under Shimla Division NO.III SH Repair of mainhole, damaged wall in play ground, MS Post under ENT bridge of block 9, preprinted steel sheet roofing Ist floor of Makanda house at Barnes Court Shimla-2

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all lead lift. :- Ordinary rock

Providing and laying cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of centring and shuttering including carriage of materials in all leads and lifts in foundations and plinth.

Centering and shuttering including strutting, propping etc. and removal of form work for : in vertical surfaces such as walls any thicknessw with steel plates including carriage of materials within all leads and lifts.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:(i) 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)

Providing weep holes in brick masonry /stone masonry/plain reinforced concrete abutment ,wing wall return wall with 110 mm ( one hundred milimetre ) dia ,PVC pipe extending through the full width of the structure with slope of 1(v): 20 ( Twenty) ( H) towards drawing face complete complete as per drawing and technical specification clauses 614,709,1204.3.7 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts.

Providing and fixing M.S. welded mesh 25mm X 25mm X 2mm thick as per approved design complete by welding with electrical plant complete including applying priming coat of red lead paint as per HP.PWD. Specification 1990 Volume-I and including carriage of materials upto all leads and lifts by mechanical means and manual labour and as directed by the Engineer in Charge.

Providing and fixing 0.50mm thick prepainted steel sheet of approved shade in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20microns over 5microns primer coating to back coat of polyster of 5microns over 5microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers or with self drilling/ threading screws with washers complete with all accesoriees as required within all leads and lifts as directed by Engineer-in-charge.

Providing and fixing polycarbonated tranparent sheet2.00mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts.

Providing and Fixing 15cm long fasner as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Providing and fixing M.S.hinges 75mm size as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 150 mm as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Providing and fixing Door Bend 150mm as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Providing and fixing Plain Bend 150mm as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Providing and fixing P V C Collar 150mm as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Painting on steel work with Deluxe Multi Surface Paint of required shade. Two or more coat of approved brand and manufacture as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts

Disposal of surplus excavated earth by Mechanical with in all leads on approved dumping site of M.C. Shimla or otherwise including payment of prescribed charges of dumping to the owener of dumping site through all mode of transportation including head load animal load or mechanical means alongwith its leveling and to complete the work of mechanized means and labour (if any required).The dumping site to be arranged by the contractor entirely at his own risk and cost. All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the course of diisposal shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth in Cement mortar 1:6 (1 cement: 6 sand) including carriage of materials within all leads and lifts.