Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹32.3 L+₹3.3 L (11.4%)Rejected-Finance BOOTH NO 15 SHOPPING COMPLEX URBAN ESTATE PHASE II JALANDHAR CITY PIN 144022 | JALANDHAR | PUNJAB | 144022 | L2 | Rejected-Finance L2 | |
| 3 | L3₹32.5 L+₹3.5 L (12.0%)Rejected-Finance | L3 | Rejected-Finance L3 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
5 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (East) Jalandhar Cantt
Garrison Engineer (East) Jalandhar Cantt
CERTAIN REPAIR TO OTM CAN ALONG RAMAMANDI ROAD UNDER AGE B/R-II OF GE (EAST) JALANDHAR CANTT
2022_MES_556005_1
GE/JULL/ET-64/2022-23
Open Tender
Civil Works
Item Rate
273 days
Jalandhar Cantt
As per tender documents
8 documents required · 8 mandatory
₹500
Garrison Engineer (East) Jalandhar Cantt
₹70,000
Yes
22 Nov 2022
4 Oct 2022
12 Nov 2022
4 Oct 2022
5 Nov 2022
24 Oct 2022
Amount
Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed.
Material and labour 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified & directed.
Material and labour 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.
Forming contraction (dummy) joints 50mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and directed
Material and labour chequered cement concrete tiles 25cm x 25cm x 20 to 22mm thick with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement and pigment, including taking down old stone slab/ concrete floor complete all as specified and directed. Note : The sample shall be got approved from the GE before bulk procurement and lots shall be got tested independently by the GE.
Material and labour for 30mm sand filling under interlocking tiles including watering and consolidation complete all as specified and directed.
Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, benching, edges of interlocking/ chequered tiles and the like including weathering, slightly rounded or chamfered angles throating, complete including necessary form work complete all as specified and directed.
Material and labour 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth without using extra cement laid in alternate panels complete all as specified and directed
Taking down cement plaster from brick/ stone masonry of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.
Material and labour 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).
Supply only integral water proofing compound all as specified and directed.
Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour 5mm thick rendering in patches not exceeding 3 sqm each patch in cement mortar (1:3) as on ceiling and finishing the surface even and smooth without using extra cement including taking down plastering and applying three coats of white wash complete all as specified and directed.
Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.
Material and labour for preparation of plastered or un-plastered surface of wall and applying two coats of dry distemper over a coat of chalk whitening complete all as specified and directed.
All as per Srl Item No. 17.00 here-in-before but on ceiling
Material and labour preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and one coat of birla white putty complete all as specified and directed.
Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.
Material and labour preparation of old decorated surfaces of walls, washing, rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper complete all as specified & directed.
All as per item No. 21.00 but on ceiling
Material and labour for hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frames glazed with putty or fixed with beads complete all as specified and directed.
Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.
Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed.
Demolition of cement concrete in ground floor and paving/ sunken portion (below or above ground level) complete all as specified and directed.
Material and labour cement concrete (1:5:10) type E-2 using 40mm graded brick aggregate as in filling in sunken portion and mass concrete complete all as specified and directed.
Material and labour applying two coats of FOSROC/NITOBOND/SHALIMARSUPERCRETE water proofing coating on the entire surface of sunken portion complete all as specified and directed. MAKE;- above brand in P.S-II
Material and labour for 15mm thick cement screed in cement mortar (1:3) with integral WPC FOSROC/ NITOBOND/ SHALIMAR SUPERCRETE complast X 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC’s Nitco bond AR cement slurry/ STP No 1 liquid @ 200 ml per bag complete all as specified and directed. MAKE;- above brand in P.S-II
Material and labour for 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified & directed.
Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outside MD land complete all as specified and directed.
Material and labour non skid ceramic coloured tiles of size 300 x 300x 7 to 8mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
Material and labour glazed ceramic coloured tiles of size 450 x 300 x 6 to 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 15mm thick in cement mortar (1:4) complete all as specified and directed.
Material and labour non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) including neat cement slurry with 3 Kg/Sqm complete all as specified and directed.
All as per item No 34.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.18 Sqm but not exceeding 0.38 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.
All as per item No 36.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat.
Material and labour for vitrified ceramic coloured/ designed tiles of size 600 x 600 x 8 to 10mm thick (patch work in existing vitrified tiles floor), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 15mm thick in cement mortar (1:6) complete all as specified and directed.
Material and labour for vitrified ceramic coloured/ designed tiles of size 600 x 600 x 8 to 10mm thick, as on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.
Material and labour for Granite (of any type) 18 to 20mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in vertical surfaces including 15mm thick backing coat in cement mortar (1:6) complete all as specified and directed.
Demolition of reinforced cement concrete in ground floors and paving n. exc. 15cm thickness (reinforcement to cut as required to facilitate demolition) complete all as specified and directed.
Material and labour RCC (1:2:4) type B-1 using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.
Material and labour 14/ 16mm thick machine cut Udaipur green polished stone slab, set and jointed with neat cement slurry mixed with pigment to match the colour of stone, laid over and including minimum 15mm thick screed bed in cement mortar (1:6) including cutting and polishing and making holes in stone and RCC shelves suitable for passing gas pipe with round edges as required complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness, Nainital or similar pattern roof coverings complete all as specified
Dismantling plain or corrugated asbestos cement sheet as in roof coverings complete all as specified
Supply and fixing 0.63mm thick galvanized corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed
Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Supply and fixing Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
Material and labour 6mm thick asbestos cement fibre corrugated/ semi corrugated sheets as in roof coverings fixed with L-type or J-type hooks or cranked bolts complete all as specified and directed.
All as per item No. 52.00 but except sheets
Material and labour asbestos cement two piece adjustable ridge for corrugated or semi corrugated sheets 6mm thick fixed with ‘L’ or ‘J’ type hooks complete all as specified and directed.
Supply and fixing galvanised, 0.80mm thickness plain mild steel sheeting in ridges, hips valley gutters, drip, door cover and straights flashings fixed with 'L' or 'J' type or cranked hook bolts, in roofs, walls etc of calss-3 complete all as specified and directed
Material and labour 18-20mm thick machine cut Kota stone slabs as in flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and directed
All as per item No 56.00 but as in skirting laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.
Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.
Taking down shutters of any description exc. 1 Sqm and n. exc. 2 sqm each complete all as specified and directed.
Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.
Material and labour 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.
All as per ser item No. 64.00 but gauged shutters without sash bars.
All as per ser item No. 64.00 but as in ventilators
Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.
Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified.
Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fixing floor spring door closer for aluminium/ wooden door in any size, brass and chromium plated body, approved quality, including carefully taking down the existing door and removing the damaged floor door closer and accessories etc, and refixing the same door on the new door closer and making good the floor area and match the surface complete work all as specified and directed by Engineer-in-Charge
Repair to existing aluminium door/ window in any size including carefully taking down the existing door/ window and removing the damaged aluminium fittings and accessories etc and refixing the same door/ window with new fittings on same opening and making good the floor/ wall area and match the surface complete all as specified and directed
Material and labour aluminium anodised door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150mm x 44mm x 3mm thick middle rail 100mm x 44mm x 2.85mm thick stile and top rail including necessary fittings joinery cleat, glazing packing snap beading 10mm x 10mm, anodised aluminium handle 200mm long (02 No), 3 No 100mm size chromium plated butt hinges, 2 No 200mm size aluminium tower bolt and aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100mm x 44mm x 3mm and door shutter, bottom portion covered with 9 mm thick pre-laminated particle board, interior grade, pre-laminated on both sided with decorative choice lamination (colour/design approved by Engineer-in-charge) fixed to aluminium frame work and top portion covered with 5.00 mm thick float glass and pattern. One mortice lock (Make: Harrison) with shutter and fixing complete all as specified and directed.
Material and labour anodised aluminium window/ ventilator shutter side hung having 75mm x 44mm x 2.85mm thick stile bottom rail an top rail including necessary fitting joinery cleat glaring packing snap beading 10mm x 10mm, 2 Nos of anodised aluminium handle 150mm size, 2 No chromium plated bott hinges 75mm size and 2 No 100mm long aluminium tower bolt etc including frame of section 100mm x 44mm x 3mm and including 5mm thick float glass and fixing complete all as specified & directed.
Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
All as per item No 75.00 but fixed in repairs
Material and labour mild steel sliding door bolts 250mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.
Supply and fixing 100mm size stainless steel butt hinges for fixing to PVC doors complete all as specified and directed.
Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed in repair complete all as specified and directed.
Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.
Material and labour preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Material and labour for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but n. exc. one brick complete all as specified and directed.
Supply and fixing 200mm size PTMT tower bolt fixed with machine screws complete all as specified and directed.
Supply and fixing MS 150mm size PTMT bow handle fixed with machine screws complete all as specified and directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section, in any position, unframed work complete all as specified and directed.
Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.
Supply and fixing mild steel work as in ceiling frame work and fastenings and heavy brackets framing (Tee, angles, channels or MS plate or flat sections including distance pieces and cleats etc complete all as specified and directed.
Material and labour 6mm thick asbestos fibre cement plain building boards fixed to timber frame work with screws as in ceiling complete all as specified and directed.
Material and labour preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.
Material and labour solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive frame as per specifications and drawing
Material and labour 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing to wall to make PVC frame as per specifications and drawing
Supply and fixing mineral fibre acoustical suspended ceiling system with dune (Tegular) edge tiles with 24mm exposed grid. The tiles should have humidity resistance of 99%, NRC 0.5, light reflectance > 85%, thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance UK class 0/ class I (BS 476 pt-6 & 7) in module size of 600x600x16mm, suitable for green building application with recycled content of 32%. The tile shall be laid on prelude 32 with 24mm wide T section flanges colour white rotary stitching on all T sections i.e. the main runner, 1200mm & 600mm cross Tees with a web height of 27mm and a load carrying of 7.1 Kgs/sqm and minimum pull strength of 100 Kgs. The T section have galvanising of 90 grams per Sqm and need to be installed with suspension system. All accessories manufactured and supplied by armstrong world industries complete all as specified and directed
Taking up or down 15mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20mm bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Material and labour galvanised steel tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Material and labour galvanised steel tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc. including taking up/ down existing tubing complete all as specified and directed.
Supply and fixing stop valves 15 mm nominal bore, cast copper fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, fixed in repairs complete all as specified and directed.
Supply and fixing stop valves 20mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed.
Supply and fixing in repair stop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, complete all as specified and directed.
Supply and fixing in repair bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.
Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flushing pipe complete including breaking up existing damaged WC seat and make good to floor complete all as specified and directed.
Supply and fixing vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminium hinging device including mild steel chromium plated jet fixed to water closet with 415mm to 445mm long flexible pipe complete all as specified and directed.
Supply and fixing in repairs seat cover for water closet pedestal pattern complete all as specified and directed
Supply and fixing PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. fixed in repairs complete all as specified and directed.
Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.
Supply and fixing chromium plated jet for EWC with 600mm long CP tube superior quality complete all as specified.
Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed.
Supply and fixing Acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed.
Supply and fixing rotational moulded polye-thylene water storage tanks, 500 litres capacity (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.
Supply and fixing rotational moulded polye-thylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, all as specified & directed.
Material and labour ball valve brass high pressure with polythene float and fly nut complete screwed for 20mm bore dia of iron pipe or brass ferrule and fixed complete all as specified
Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified.
Supply and fixing vitreous china wash hand basin, white, flat back 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including bracket and cutting for and pinning in ends of brackets complete all as specified and directed.
Supply and fixing in repair vitreous china wash hand basin oval shape including chromium plated waste coupling and PVC waste pipe with connector complete all as specified and directed.
Supply and fixing hot and cold mixer fancy type single or double legged chromium plated brass screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed in repairs to wash hand basin complete all as specified and directed.
Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed.
Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including and fixing of flush pipe, grating with waste coupling and union for discharge pipe, waste pipe, spreader etc, size of urinal 59cm x 39cm x 37.5cm complete all as specified and directed.
Material and labour 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed.
Material and labour 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.
Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting of the seepage from roof, wall, floor etc all as specified and directed.
Demolition and breaking up drain pipes (AC or PVC) 150mm dia set in cement mortar complete all as specified.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 110mm bore complete all as specified.
Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints laid in floors 75mm bore complete all as specified.
Supply and fixing PVC (SWR) bends any radius 110mm bore with access door all as specified and directed.
Supply and fixing PVC (SWR) bends any radius 75mm bore with access door all as specified and directed.
Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed.
Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed in repairs complete all as specified and directed.
Supply and fixing in repair mild steel CP grating 125mm dia with centre hole all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.
Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.
All as per Ser item No 136.00 above but except bricks
Dismantling of brick tiles single layer as in roof covering all as specified and directed.
Demolition of mud in roofs any thickness including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Material and labour brushing neat cement slurry with 2.75 kg of cement per sqm all as specified and directed.
Material and labour for bitumen primer applied on plastered surface of roof at the rate of 0.40 kg/sqm of surface area of roof for water proofing and dump proofing treatment complete all as specified and directed.
Material and labour applying a coat of hot blown paving industrial bitumen 85/ 25 @ 1.20 kg/ sqm over a coat of primer @ 0.3 litre per sqm over the roof surface including cleaning surfaces complete all as specified and directed.
Material and labour APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed.
Material and labour brick tile terracing with 40mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement mortar all as specified and directed.
Material and labour cutting out cracks to V-section in existing RCC roof slabs or terracing, cleaning out and filling with a hot mixture of bitumen VG-10 and clean dry sand 1:1 (by weight) complete all as specified and directed.
Material and labour flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.
Material and labour 12mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc all as specified and directed.
Material and labour repairing of RCC projections, chajjas, roofs, fascia etc by necessary preparation, scarping, cutting, chiseling de-rusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces with cement concrete (1:1½:3) using 12.5mm graded crushed stone aggregates and reinforcement with expended metal/ welded mesh of weight exc. 2 kg per sqm but n. exc. 3 kg per sqm with ot without facia and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n. exc. 5 sqm each and thickness of RCC member n. exc. 70mm including necessary form work and applying two coats of cement base paint of tint matching with the existing surfaces; work in building at any height as required complete all as specified and directed.
B.P CONSTRUCTION CO
KABEER CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .