Construction of Toilet at Near to Mela Thiruvengadam Bus stand Anganwadi in Thiruvengadam Town Panchayat.

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications.

Collection supply and filling of Well Gravel approved quarry including cost and Conveyance of all materials to site and all labor charges for filling etc., Complete.

Plain cement concrete Using 1:4:8 mix ( One cement , four Sand and Eight aggregates) using 40 mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying,consolidating and curing etc complete as per the standard specifications. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. Beam,Roof

Pcc Shuttering

RCC 1:11/2:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering, Centering and cost of Reinforcement grills but including curing, finishing etc completed

Supply and fabrication of steel and placing in positon TMT steel grills for RCC works as per design given including cost of steel and GI binding wire in floors etc., complete with standard specification

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

BRICK WORK in cement mortar 1:5 (One cement and five sand) using best quality of country bricks of size 8 3/4 "X 4 1/4" X 2 3/4" for the following including curing etc., complete complying with standard specifications.

SPECIAL PLASTERING and finfishing all the RCC exposed surface such as RCC slabs, sunshades, canopies, staircase steps, landing slabs, etc. with cement mortar 1:3 (One cement and three sand) 10mm thick and including hacking the surfaces and providing necessary cement mortar nosing beading as per size, specification wherever necessary using the same mix as directed by the departmental officers etc., complete complying with standarad specification.

PLASTERING walls with cement mortar 1:5 (One cement and five sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges etc. complete.

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Cement paint Two coats with good quality of approved cement paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting new iron works such as steel doors, windows, rolling shutters, ventilators, window bars, balusters etc., with two coast best approved fresh quality and colour of synthatic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc complying with standard specification

S Perumalsamy (BID ID -1153519)