Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.0 Craccepted-finance | ₹4.0 Cr | accepted-finance |
Tender Value
₹3.9 Cr
EMD Value
₹5.8 L
Closing Date
25 Feb 2026, 11:00 pmClosed
Minor Irrigation Department
BASAVARAJ PATILA
REJUVENATION OF LIFT IRRIGATION SCHEMES AT LACHANAKERI AND KATARKI VILLAGES IN KOPPAL TALUK AND KOPPAL DISTRICT
MI/2025-26/LI/WORK_INDENT8542
MI/2025-26/LI/WORK_INDENT8542
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Koppal
6 documents required · 6 mandatory
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25) Executed in any one year the minimum quantities of work: 1) Earth work(Excavation, Embankment) etc 6999.00 Cum, 2) Pumps(100 Hp) 3 Nos,3) Raising main (MS Pipe) 1039.00 Rmtr
Satisfactory completion (at least 90% of the contract value), as Prime contractor, at least one similar work such as CONSTRUCTION / IMPROVEMENTS /WATER SUPPLY SCHEME/ REJUVENATION TO LIFT IRRIGATION SCHEMES from Single Contract of value not less than Rs.192.77 Lakhs during the last five years (2020-21 to 2024-25).The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer of the concerned division. (Workdone of previous years shall be given a weightage of 10% per year to bring them to the price level of FY 2025-26)
Contractor Registration Certifcate
List of existing commitments and ongoing works
EPF & ESI Registration Certificate & Previous month ESI Payment challan.
Reports on the financial standing of the tenderer, Such as profit and loss statements and auditors reports for the last five year
Each Tenderer should further demonstrate (a) Availability by owning at least 50% of the required / specified key and critical equipment for this work and the remaining 50% can be deployed on lease/ hire basis for all works provided, the relevant documents (Bidder has to upload the Scanned Copies of Original Commitment agreements, RC book, Purchase invoice, sale deed, hire/lease deed, latest Bextracts, latest insurance copy etc.,) for availability for this work are furnished. A) Availability by owing the following key and critical equipment for the work. Excavator REQUIRED 02 NOs OWN 01NOs HIRE 01NOs Lorry / Tippers REQUIRED 2NOs OWN 1NOs HIRE 1NOs Crane REQUIRED 01NOs OWN OR HIRE
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2020-21, 2021-22, 2022-23, 2023-24 & 2024-25). Achieved in at least two financial years a minimum financial turnover of Rs.771.08 Lakhs.(Financial Turn over of previous years shall be given a weightage of 10% per year to bring them to the price level of FY 2025-26).
Liquid assets and or availability of credit facilities of not less than Rs.193.26 Lakhs (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc
₹5,000
₹5.8 L
10 Feb 2026
10 Feb 2026
27 Feb 2026
24 Feb 2026
16 Feb 2026
Rejuvenation of Lift Irrigation Schemes at Lachanakeri and Katarki Villages In Koppal Taluk and Koppal District.
Lachanakeri:Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, struttin...
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means break ing lead caulked joints, melting of lead and making in...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confo...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confo...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...
Supply, ererction and commssioning of CONTROL PANEL WITH 3NOS FCMA SOFT STARTER 100HP to 40HP (2W+1S) WITH 40KVAR MOTOR CAPACITOR -INDOOR TYPE-AL BUSBAR for smooth starting by toqure control and reduc...
Chain pulley block 5 Ton Capacity.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.complete...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Katarki:Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, b...
Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means break ing lead caulked joints, melting of lead and making in...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confo...
Manufacturing, providing, trasporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)/ SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe-410 grade) confo...
Supply and delivery at site brand new best make Foot valve suitable for centrifugal pump above 12.50HP confirming with ISI mark and its latest amendments. complete with all lead and lifts including l...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Design, manufacturing, supply, errection, trail running, performance test and commissioning of centrifugal pump of approved make conforming to IS:12699 (1989) (Reaffirmed 2009) having specified pump o...
Supply, ererction and commssioning of CONTROL PANEL WITH 3NOS FCMA SOFT STARTER 100HP to 40HP (2W+1S) WITH 40KVAR MOTOR CAPACITOR -INDOOR TYPE-AL BUSBAR for smooth starting by toqure control and reduc...
Chain pulley block 5 Ton Capacity.complete with all lead and lifts including loading and unloading and as per specification with the directions of Engineer-in-charge of work.
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
detailed_specification.doc
Instructions to Tenderers • 0.61 MB
8542 kw4.docx
Tender Document • 1.50 MB
RoyaltyRate.pdf
Instructions to Tenderers • 4.03 MB
e_payment.doc
Instructions to Tenderers • 0.19 MB
general_specifications new.pdf
Instructions to Tenderers • 0.57 MB
labour.docx
Instructions to Tenderers • 0.98 MB
Lachanakeri and katarki 480 dwg.pdf
Others - Drawings • 6.52 MB
FD417EXP-12-2024-Dtd-09-08-2024.pdf
Instructions to Tenderers • 0.43 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .