SPECIAL REPAIR TO INTERNAL ROADS ALONGWITH ROAD FURNITURES AT MIL STN KALKA UNDER GE (I) JUTOGH

M&L for repair to pot holes any depth n. exc. 1 Sqm each incl sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edge to at least 25mm in depth making good by filling in screened and graded road metal, watering, applying tack coat @ 5 Kg per 10 Sqm and well ramming (including supply of road metals) complete all as specified and directed.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for applying evenly a priming/ tack coat of paving bitumen of VG-30 @ 5 Kg per 10 sqm complete all as specified and directed.

M&L for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 8 to 12 tone power roller, binder content (paving bitumen VG-30) 4% by weight of total mix laying with mechanical paver machine and mixing in hot plant, complete all as specified and directed.

M&L for bituminous pre-mixed asphaltic dense concrete 40mm consolidated thickness, with 5 % binder content by weight of total mix using VG-30 bitumen, laid with mechanical paver and rolled with 8 to 12 tone power road roller and compacted to required camber and gradient complete all as specified and directed.

S&F solar cat eye aluminum alloy shall (100% water proofing design according to IS) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed

M&L for 2.5mm thick road marking strip (reflective) of n.exc 10 cm wide specified shade colour using hot thermoplastic material by fully automatic thermoplastic paint applicator machine fitted with profile shoe, gum beds dispenser propane tank healers and profile shoe heater driven by skilled operator on road surface including cost of materials labour, T&P, sealing the road surface of all dirt scales oil greases and foreign material etc. complete as per direction strictly in accordance to applicator specification, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n exc. 15cm thick (below and ground level), complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in sub base for flooring, complete all as specified and directed.