PROVN OF 02 X HIGH MAST LIGHT ALONGWITH 40 X FLOOD LIGHTS ALONG THE BOUNDARY WALL ,40X SECURITY LIGHTS NEAR PERMANENT BLDGS INCL POWER BACK UP 15 KVA GENR SET AND LIGHTENING PROTECTION SYS ALONGWITH CHEMICAL EARTHING AT BLDG NO A-69 AND A-71 AT SIGNA

M&L Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed or casing caping on wall/ceiling in ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion complete all as specified and as directed.

S&F ceiling roses, 6A, 240 V, surface type, intended to support mechanical loads by means of flexible cord, having provision for the connection of switch wiring, screw type terminal, made out of Polyamide or hornbean complete all as specified and as directed.

M&L for switch piano (flush button type) single pole one way 6 Amps complete all as specified and directed.

Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size including taking down old unserviceable one complete all as specified and as directed.

Supply and fix Cu termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.

Supplying & laying in trenches 40 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 mm X 6 mm copper strip complete all as specified and as directed.

S&F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm longhex. head screw complete all as specified and directed.

M&L for chemical pipe earthing electrode of size 3" dia (80 mm dia 03 Nos) and 3 m long of M series model M-392 or T-393 of make Ashlok /JMV, consisting of inner GI pipe (master) protected with outer zinc coated pipe with high crystalline conductive mixtures (CM) having anti corrosive and conductive properiy. Sealed in between the two pipe including threading on both the ends inciuding back fill compound (BFC) 3 bags filled surrounding the earth electrode according to manufactures instructions and all as specified and testing on completion including watering pipe 20 mm bore medium grade GI pipe, PCC 1:3:6 type C-1 using 20 mm graded stone aggregate pit with and including 40 mm thick precast RCC (1:2:4) type B1 cover of size 50 cm X 50 cm with 8 mm round bar @ 15 cm C/C both way all as per electrical plate No 2 of SSR part-1, funnel including main earth lead from earth electrode to test point up to 7.5 M Copper strip 32x6mm complete all as specified and directed.

Supply,install, testing and commissioning of Silent Diesel engine driven generating set 415 Volts 3 phase 4 wire engine as per BS 5514/ IS 10002 including Emission control device as per PPCB Norms and alternator as per IS : 13364 complete with relay panel for automatic starting on mains failure, control panel having meters, sound proof canopy and foundation etc for capacity 15 KVA as per ISO - 3046/BS 5514 conforming to the detailed specification as under. make- Kirloskar Model No- KEC-T82.5-II or Greaves Power or Equivalent (A) ENGINE : The Diesel Enginewith AMF Panell shall be radiator water cooled, 15 KVA or 12 KW at 1500 RPM, Cylinder- 2 Nos. Starting stopping : Electrical start with 12 V DC 1 x 88 AH, 12 V Exide / Prestolite Low Maintenance Battery,Electronic governer , The fuel tank provided shall be suitably mounted on the base frame fabricated out of 16 SWG MS sheets and capacity to run the genset for 8 to 12 hours continuously on full load. Fuel tank shall have Drain plug, Hand hole for cleaning, vent breather, fuel suction and return connections, fuel level indicator fuel filling neck with cap etc as per the standards. The engine and alteranator shall be directly coupled to ensure perfect alignment. The engine and alternator shall be mounted on a common base frame with AVM pads all as per manufracturer CUMMINS / KIRLOSKAR / GREAVES POWER. (B) ALTERATION: Rating 15 KVA or 12 KW at 1500 RPM 415 V Phase to Phase and 240 Volt Phase to Neutral, 50 Hz 3 Phase 4 wire system , solid state Voltage Regulator,(+/-) 1 voltage regulation, alternato Screen protected / drip proof, self ventilating, self excited, self regulated, brushless, contineous duy protention IP 21 as per IS 13364 developing 20 KVA at 0.8 PF. It shall have provision for 10% overload for one hour on every 12 hours, The alternator shall confirm to IS : 13364/BS5000 Make : KIRLOSKAR / CROMPTON/ POWER GREAVES. (C) CONTROLS/PROTECTION: (i) Low LOP fault indication (ii) Indication for Water Temparature (iii) High Colant Temparature fault Indication (iv) Failure to start fault indication (v) Battery Volage monitoring (vi) Low Battery Indication (vii) Fuel level Indication (viii) Engine RPM meter (ix) Engine run hours meter (x) Voltage for all three Phases (xi) Amper meter for measuring current in all three phase. (xii) Frequency meter indication (xiii) Protection for Over/Under Voltage (xiv) Protection for Over/Under Voltage (xv) Electronic tamper proof KWH meter 3 phase, 4 wire system with suitable ratio CTs. (xvi) Oveload protection (xvii)Suitable capacity of Battery charger shall be provided in the control panel to charge the batteries when mains supply in availbale. When the Gen set is running the battery will be charged from the charging alternato. Make : KIRLOSKAR/ CROMPTON/GREAVES POWER.