SPECIAL REPAIRS TO TOILET BLOCKS OF OTHER THAN MARRIED ACCOMMODATION A5/6, A6/6 AND A7/3 OF 172 INF BN (TA) MADRAS, CINCAN LAND (ARMY), CAMPBELL BAY UNDER GE (I) CAMPBELL BAY

Amount

B/R PORTION M & L for 30 mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof padding etc finishing even amd smoth without using extra cement with using water prooofing compound complete all as specified anad directed. Note : WPC @ of 3% by weight of cement shall be measured and paid separately.

M & L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces and priming surfaces and applying heavy roof treatment (for severe conditions), using glass fibre base bitumen felt, grade 2 complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge.

Dismantling floor, hearth or wall tiling, granite stone etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls , PCC block walls, ceiling etc including racking out joints, hacking for key, scrubbing down with water etc and removing rubbish to a distance not exceeding 250 m all as specified and as directed by the Engineer-in-Charge.

M & L for Non skid ceramic tiles 7 to 8mm thick, area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors, laid over and including 15mm thick screed bed in CM (1:6) set and jointed in cement slurry and pointed with coloured or white cement to match with exisiting surface all as specified and as directed.

M & L for glazed ceramic tiles coloured of size 400 x 300 mm x 7mm thick on vertical surfaces of wall dado, skirting etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer 10mm thick in CM (1:3) complete all as specified and directed

M & L for 75mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in plinth protection finished cement concrete surfaces finished even smooth without using extra cement including necessary construction joint complete all as specified and as directed.

S & F in repairs for anodised powder coated aluminium for door/ window /ventilator/ partition frame and shutter for door/ window/ ventilator etc with one or more rebates including necessary joining cleats glazing clips, rubber packing, anodised aluminium snap beading, screws, and necessary locking arrangments etc. (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

Taking down wooden / Aluminium / Iron / PVC chowkhats or frames with shutters (without taking off shutter from frame) not.exc 1.5 Sqm each complete all as specified and as directed.

S & F figured glass, 5mm thick pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M & L for prelaminated particle board 12mm thick interior grade prelaminated both side with decorative choice lamination fixed with screws to aluminium frame work complete all as specified and as directed.

S & F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on ceilings complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on walls complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame covered with heat moulded wood grain printed PVC sheet (used instead of Plain colour PVC sheet) with 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mm x 10mm (90O) used instead of exposed portion of PVC sheet beading, panelling of wood grain printed PVC sheet to fit in the mild frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet (used instead of plain colour PVC sheet) and edges painted to match with the printed sheet, reinforced with mild steel square tube in opening as per specification & drawing complete all as specified and as directed.

S & F 100mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 75 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

S & F 100mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F in repairs, health faucet 15mm dia. with 1.5 meter long easy flex tube in chromium finish and wall look complete all as specified and as directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty in square n. exc. 0.5 Sq.m. in each pane complete all as specified and as directed.

Supply and laying of 16 mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on wall/ ceiling or laying in floors incl taking down of existing GI plumbing lines etc. complete all as specified and as directed.

Supply and laying of 25 mm outer dia. CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on wall/ceiling or laying in floors incl taking down of existing plumbing lines etc. complete all as specified and as directed.

M & L for cutting chases, pinning in, making good to facing where required and pointing in CM (1:3) for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and as directed.

S & F in repairs of 15 mm bore fancy type chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs of 15 mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs brass chromium plated shower rose with shower arm of size125mm with swivel joints fixing to steel pipes complete all as specified and as directed.

S & F in repairs, 15mm dia. chromium plated stop valves, fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs PVC flexible connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs 10 ltr capacity, PVC low level flushing cistern, with ball valve and handle/ push button 32 mm dia flush pipe etc complete & connecting to WC including taking down unserviceable cistern complete all as specified and as directed. (Make : Sleek of Hindware, Slimline of Parryware or equivalent model of Cera or other techno-commercially makes as approved by GE)

S & F in repairs of 50 mm bore of pipe low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to wall, ceiling or in floors complete all as specified and as directed.

S & F in repairs tubular towel rail 20mm dia, D type 600mm long between flanges of brass chromium plated fixed with and including CP brass screws complete all as specified and as directed. (Make : Jaquar, Cat Part No :ACN-1111SM or equivalent in Prayag/ Parryware/ Hindware/ Cera or other techno-commercially makes as approved by GE)

S & F in repair vitreous china squatting pan Orissa Pattern of size 580 x 440mm white with integal foot rest first quality with 100 mm dia 'P' or 'S' trap, ISI marked including provision of lime concrete bedding excluding flush pipe complete all as specified and as directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts removing the existing one complete and making good the disturbed portion and all connections all as specified and as directed.

S & F in repairs vitreous china urinals, bowl type, white (back or corner wall type) of size 465 x 355 x 265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement , including fixing urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and as directed.

S & F in repairs Vitreous China counter sunk wash basin oval shape of size 600 x 450mm complete with and including all accessories including waste coupling, waste pipe etc complete all as specified and as directed.

Supply only plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc. complete all as specified and as directed.

S & F grating round 140 mm size of PTMT, (minimum wt 50gms.) outlet with grating including jointing with solvent cement complete all as specified and directed.

S & F in repairs PVC (SWR) pipes 110mm dia. single socketed in any length with rubber ring joints laid in trenches or floors complete all as specified and as directed.

S & F in repairs 110mm dia. PVC (SWR) plain bends any radius with or without access door as required complete all as specified and directed.

S & F in repairs PVC (SWR) multi floor trap 75mm dia. outlet with grating including jointing with solvent cement complete all as specified and directed.

Supply only 32 mm dia waste fittings, brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly -nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M & L for finishing walls with acrylic smooth exterior paint of required shade (two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20Kg/10sqm) all as specified and directed.

M & L for preparation of old painted surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M & L for prepartion of old decorated surface of ceiling etc, and applying one coat of white wash, finishing the surface even and smooth complete all as specified and as directed.

S & F in repairs PVC waste pipe 32mm dia size in any locations complete all as specified and directed.

S & F in repairs 100mm size aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F in repairs soap dish stainless steel approximately size 160 x 160 x 90mm fixed to plugs with chromium plated brass screws chromium plated complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) and as in shelves, platforms , man holes and similar articles with plain faces set in CM (1:4) complete all as specified and as directed.

M & L for mild steel TMT bars , 10 mm dia and over cut to length, bent to shape required including cranking , bending spirally, hooping for columns, hookings/ ends and binding with and including MS wire not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Taking up or down 50 mm dia. steel tubing and connections including S & F of GI water tubing of 50 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

M & L for cutting holes in to or through brick or concrete block walls superfacial area exc 150 Sqcm but not exc 400 Sqcm built in cement concrete mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and as directed.

S & F for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S & F in repairs 75 mm dia PVC bends any radius fixed to PVC pipes etc complete all as specified and directed.

S & F for 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B-1 ( using 20mm graded stone aggregate) , finished concrete surfaces even and rough to receive floor finishes complete all as specified and as directed.

S & F granite tiles 12 mm thick (of any type) in steps jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including ponting in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and polishing and inserting in wall etc complete all as specified and directed.

Demolition of precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar all as specified and directed.

M & L for precast cement concrete block masonry with solid blocks, 1:3:6 type C-1 (using 20mm graded stone aggregate) exc 10cm in width and set in CM (1:4) complete all as specified and as directed.

E/M PORTION Taking down DB with MCBs/ main switch of any size and making good the disturbed surfaces of wall/ floor complete all as specified and as directed.

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good the disturbed surface of wall/ floor etc complete all as specified and as directed.

M & L for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 volts grade, conforming to IS-694, 1.5 Sqmm (nominal area) multi-stranded copper conductor cable drawn through in and including non-metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes, switch plates of suitable make and 1.5 Sqmm copper earth continuity wire connected to earth dolly complete all as specified and as directed. (a) one light/ fan point controlled by one switch

Description all as per Item No 70.00 above but 2.5 Sqmm cable size and 2.5 Sqmm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and as directed.

S & F switch modular type, single pole one way 6 Amps, 240 volts AC suitable for existing modular switch boxes without indicator complete all as specified and as directed.

S & F socket modular type 16 Amps, 3 pin combined, multi stranded, 2 module, 240 volts suitable for existing modular switch boxes complete all as specified and as directed.

S & F switch modular type 16 Amps one way with indicator 1 module, 240 volts suitable for existing modular switch boxes complete all as specified and as directed.

S & F for ceiling rose, surface bakelite, 65 x 50mm, three terminals, ISI marked all as specified and as directed.

S & F wall mounted LED 18/20 watts 6500K with output of 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre-wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of suitable size from ceiling rose to fitting with integral LED tube 4' x 18 watts complete all as specified and as directed.

S & F sheet metal enclosure for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 Amps rated busbar, 240 volts as per IS: 8623 complete complete all as specified and as directed.

S & F MCB SPN 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/ IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed.

S & F MCB SP 6-32 Amps breaking capacity 10 KA 'C' curve confirming to IS/ IEC 60898-1 2002, integrated label holder, sliding bottom clamp, IP 20 protected terminal, sliding shutters, 240 volts, 50 Hz including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc., complete all as specified and as directed.

M & L for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 4.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire complete all as specified and as directed.

MAHESWARI CONSTRUCTIONS (BID ID -3490669)

M/S Sudhir Kumar Gupta (BID ID -3492673)