Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-Finance | ₹20.4 L | L1 | Accepted-Finance approved |
| 2 | L2₹21.3 L+₹90,572.97 (4.44%)Accepted-Finance | ₹21.3 L+₹90,572.97 (4.44%) | L2 | Accepted-Finance approved |
| 3 | L3₹22.2 L+₹1.8 L (8.74%)Accepted-Finance | ₹22.2 L+₹1.8 L (8.74%) | L3 | Accepted-Finance approved |
| 4 | L4₹22.2 L+₹1.8 L (9.06%)Accepted-Finance | ₹22.2 L+₹1.8 L (9.06%) | L4 | Accepted-Finance approved |
| 5 | L5₹22.4 L+₹2.0 L (9.75%)Accepted-Finance | ₹22.4 L+₹2.0 L (9.75%) | L5 | Accepted-Finance approved |
Tender Value
₹36.1 L
EMD Value
₹72,170
Closing Date
28 Apr 2026, 3:00 pmClosed
Sh. Vivek Verma
Executive Engineer, Education Maintenance Division, Central and New Delhi, PWD (GNCTD), I.P. Estate, New Delhi
Repair Renovation work in school building of GGSSS, Bela Road School id 2127026 Delhi during 2026 27
2026_PWD_290139_1
04/EE(Edu)/M/C ND/PWD/2026-27
Open Tender
Civil Works
Works
30 days
work
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹72,170
29 Apr 2026
21 Apr 2026
28 Apr 2026
21 Apr 2026
28 Apr 2026
21 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
All kinds of soil
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia | - | meter | - | - |
| 2.01 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | - | Cum | - | - |
| 3.01 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | Cum | - | - |
| 4.01 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). | - | Cum | - | - |
| 5.01 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
Cement mortar 1:6 (1 cement : 6 coarse sand) | - | Cum | - | - |
| 6.01 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
Cement mortar 1:4 (1 cement :4 coarse sand) | - | sqm | - | - |
| 7.01 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | - | Sqm | - | - |
| 8.01 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
300x16 mm | - | each | - | - |
| 9.01 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
300x10 mm | - | each | - | - |
| 10.01 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
125 mm | - | each | - | - |
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.81 MB
Tendernotice_1.pdf
Tender Documents • 3.81 MB
BOQ_385175.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .