Repairs to sunken floors roofs joinery sanitary fittings plastering internal water supply and certain other misc works at A E Regt under AGE B/R II at GE (N) Ahmednagar

Amount

Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick IInd class hardwood actory made glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated slash bars including beads mitered for securing glass wire gauge etc complete all as specified and directed by Engineer-in-Charge

M&L for 35 mm thick plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge

S&F factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face , supplying & fixing in frame at site as per specification & drawing etc complete all as specified and directed by Engineer-in-Charge

S&F solid PVC door frame 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

M&L 12 mm thick prelaminated particle board balancing white lamination on both sides,fixed with screws to frame work etc complete all as specified and directed by Engineer-in-Charge

S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

S & F pressed steel door frame of size 100 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

S&F butt hinges medium weight cold rolled mils steel 100mm long etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium anodised barrel tower bolts of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium anodised handle of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long etc complete all as specified and directed by Engineer-in-Charge

S&F 300 mm mild steel ordinary rat tail rod pattern door spring including roller and roller plate etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beds etc complete all as specified and directed by Engineer-in-Charge

M & L for 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for 5.5 mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares .exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.etc complete all as specified and directed by Engineer-in-Charge

S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks ,or galvanised wire staples including necessary beading all as directed by Engr-in-Charge.

S & F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over one coat of pink primer etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed by Engineer-in-Charge

M&L for special treatment to sunken slab floor incl WC trap etc including cleaning and preparing the surface area for carrying out membrane water proofing treatment, then injection grouting the weak areas on the concrete surface with cementitious grout and applying 10mm thick cement plaster in CM 1:4. Then providing and laying Mineral Top APP (Atactic Polypropylene Polymer) modified prefabricated 5 layer 4mm thick water proofing membrane, black finished reinforce with non woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 Litre per Sqm by the same membrane manufacturer of density at 25ºC, 0.87-0.89 Kg per litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc and preparing the surface complete. and providing PCC 1:5:10 type E2 using 40mm graded mechanically crushed stone aggregates in sunken slab and 75mm thick PCC 1:4:8 type D2 using 40mm graded mechanically crushed stone aggregates as base, 40mm bore GI pipe, light grade of length not less that 50 cm as spout, non-skid glazed tiles as per existing pattern/size/tint with and incl WC vitreous china squatting pan 580x440mm with integral footrests/pedestal pan incl seat cover, white, area of WC n exc 1.50 Sqm etc after dismantling the existing sunken floor etc complete all as specified and directed by Engineer-in-Charge Note : Work shall be carried out strictly by the authenticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Taking down cement mortar plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in cement and sand mortar (1:6) on fair faces of concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:4) finished even and fair without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of newly plastered surface of walls and apply two coats of OBD finished with roller finish etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of new plastered surfaces of walls and applying two coats for cement paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old steel surface and applying one coats of synthetic enamel paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old plastered surface of walls and applying one coat of cement base paint etc complete all as specified and directed by Engineer-in-Charge

M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall etc complete all as specified and directed by Engineer-in-Charge

M&L for complete removal of old distempered and painted surfaces of walls and applying two coats of Luster (any tint) over 3mm thick layer of wall care putty & a coat of suitable primer etc complete all as specified and directed by Engineer-in-Charge

S&F fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets, or erecting stand and PVC connection etc complete all as specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series Of Parryware or equivalent makes as per list of make mentioned in appendix `C

S&F in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 of Parryware or Cat Part No 20042 of Hindware or equivalent make as per list of makes mentioned in appendix `C

S&F in repairs 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, all accessories etc complete all as specified and directed by Engineer-in-Charge. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware or equivalent make as per list of make mentioned in appendix `C

S&F in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all as specified and directed by Engineer-in-Charge Cat Part No 573 of Jaquare or its equivalent make as per list of make mentioned in appendix `C etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent make mntioned in list of makes in appendix `C' etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device etc complete all as specified and directed by Engineer-in-Charge connecting to 'P' or 'S' trap etc complete all as specified and directed by Engineer-in-Charge. Make:-Petite series Cat part No C0287(S)/88(P) Incl seat cover Cat part No E8309 of Parryware or equivalent make as per list of makes mentioned in appendix `C

S&F in repairs looking mirror of size 800 mm X600 mm, etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No C 8601 Of Parryware or equivalent makes as per list of makes mentioned in appendix `C

Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Taking up or down 15 mm bore steel tubing and connections, etc complete all as specified and directed by Engineer-in-Charge.

All as per Sl item No 49 (here-in-before) but 20 mm bore tubing

All as per Sl item o 49 (here-in-before) but 25 mm bore tubing

Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings etc complete all as specified and directed by Engineer-in-Charge

Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.

Supplying and laying 25 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings etc complete all as specified and directed by Engineer-in-Charge

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs stop cock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Oriental series) of MARC or equivalent make in list of makes mentioned in appendix `C'.

Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all as specified and directed by Engineer-in-Charge Make:- Cat part No U-0911 of MARC or equivalent in makes mentioned in list of makes in Appendix `C'

S&F in repairs bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. Make:- Cat part No MOR 1020 A (Oriental series) of MARC or equivalent make as per list of makes mentioned in appendix `C'

S&F in repairs twin bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed. Make:- Cat part No MOR 1010(Oriental series) of MARC or equivalent make as per list of make mentioned in appendix `C

M&L cast iron floor trap with grating 75mm dia including jointing to waste pipe fixed in cement concrete type (1:2:4) type B1 using graded stone aggregate including removing old traps complete.

Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge.

All as per item No. 62 (here-in-before)but 1000 ltr capacity

All as per item No. 62 (here-in-before) but 2000 ltr capacity

S&F in repair PVC bib tap 15 mm dia, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyester foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing.

M&L for preparation of old plastered treated surfaces of walls by brooming down and and applying one coat of weather proof 100 % acrylic exterior emulsion apex ultima paint of any tint as approved by GE after cleaning the surfaces etc complete all as specified and directed by Engineer-in-Charge.

M&L for 2 mm thick wall care putty etc complete all as specified and directed by Engineer-in-Charge

Dismantling timber scantlings 40 sq. cm and over in section, in any position etc complete all as specified and directed by Engineer-in-Charge

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws including dismantling corrugated steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof fixed with self tapping screws complete all as specified, colour and design as approved by GE including dismantling of plain steel sheeting, any gauge, thickness etc complete all as specified and directed by Engineer-in-Charge

S&F of Steel work in tubular trusses including special shaped washer conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and directed by Engineer-in-Charge

S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A etc complete all as specified and directed by Engineer-in-Charge

M & L for pre-cast cement concrete solid blocks, exc. 10 cm in width type D-0 1:5:10 using 20 mm graded stone aggregates and setting in cement and sand mortar (1:6) including demolition etc complete all as specified and directed by Engineer-in-Charge

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat cement slurry & pointed white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for coloured glazed ceramic tiles digitally printed premium designer series of size exc 0.12 Sqm and n'exc 0.18 Sqm , 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, laid over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free / rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with neat cement slurry & pointed with white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge

M&L for joint free / rectified anti skid ceramic coloured tiles SSR series Johnson/ FT series of orient bell or equivalent in kajaria make as specified in Particular Specification, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed with white or coloured cement to match the shade of tile etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for machine cut kota stone slab flooring 20-25mm thick laid over & including 20 mm thick screed base in cement and sand mortar (1:6) mm thick laid and jointed & pointed with neat cement slurry with grey cement slurry mixed with pigment to match the shade of tiles the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cemet and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for 16mm to 18mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round molding the edge including 10 mm thick backing coat in cement and sand mortar (1:3) jointing & pointing in white cement (1:2 ) using marble dust with admixture of pigment to match the shade of granite rubbing including dismantling etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs for Machine cut cudappah stone slab 20-25mm thick laid over and including 15mm thick cement and sand screed in cement and sand mortar (1:6), jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge

M&L for Dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade -202) of flat-30mm X2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener,polishing, rubbing & including silicon treatment at height more than 6 mtr etc complete all as specified and directed by Engineer-in-Charge

M&L in repairs 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5 mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level etc complete all as specified and directed by Engineer-in-Charge

M/L for providing 75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge

M&L for Cleaning of service tank upto 500 ltrs by removing all scale, dirt, silt, mud etc, from tanks and from mouths of circulating pipes including washing of tank internally with bleaching powder after removing scale dirt mud ec from tank and removing algae outside from tank from below bottom of tank and disinfecting tank by soraying sodium hypo chlorite solution in tank writing down date of cleaning on tank by synthetic enamel paint size of alphabet/numerical shall be minimum 7 cm using stencils et complete all as specified and directed by Engineer-in-Charge. Note:- The quoted rate shall include dismantling and refixing of water tank and check float valve refixed or provide new as applicable as etc complete all as specified and directed by Engineer-in-Charge

All as per item No 106 (here-in-before) but 1000 ltrs

All as per item No 106 (here-in-before) but 2000 ltrs

An amount of Rs 90,100.00.00 shall be deducted from BOQ on account of schedule of credit

Arihant Construction

M/s AG PATHAN