PROVN OF TOILET BLOCK NEAR COOK HOUSE AND SPECIAL REPAIRS TO ORs LINES BLDG NO T 52 AT BANASWADI GARRISON UNDER GE NORTH BANGALORE

Amount

PART I (B/R WORKS)

Excavating in trenches n.exc. 1.5 m wide and n.exc. 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in soft / loose etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soil etc complete all as specified and as directed.

Sand filling under floors or in foundation including spreading, watering and consolidation etc., complete all as specified and as directed.

Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point etc complete all as specified and as directed.

Hard core of gauge n.exc. 63mm deposited spread and levelled, laid in layers n.exc. 15cm thick, watered and rammed to a true surface using broken boulders all as specified and as directed.

Plain Cement Concrete as in foundation filling and mass concrete (1:4:8), type D-2, using 40 mm graded stone aggregate complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in copings, chajja kerbs, roof padding / staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Reinforced Cement Concrete (nominal mix), type A1 (1:11/2:3) using 20 mm graded stone aggregates as in foundations including rafts, columns, footings, plinth beams, etc complete all as specified and as directed.

Reinforced Cement Concrete (nominal mix), type A1 (1:11/2:3) using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts etc complete all as specified and as directed.

Reinforced Cement Concrete (nominal mix), type A1 (1:11/2:3) using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, shelves and the like etc complete all as specified and as directed.

Supply only integral liquid water proofing compound all as specified and as directed.

Precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 type C1 1:3:6 ( using 20 mm graded aggregate) complete all as specified and as directed.

Precast cement concrete block masonry with solid blocks n.exc 10 cm in width and setting in cement mortar 1:4 type C1 1:3:6 ( using 20 mm graded aggregate) complete all as specified and as directed.

Steel form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed.

Steel form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (horizontal or sloping)with rough finished surfaces etc., complete all as specified and as directed.

Steel form work to sides of pillars, posts, struts, piers, columns and stanchions; and similar work; vertical or to batter etc complete all as specified and as directed.

Factory made solid PVC moulded door shutters 28 to 30 mm thick (stile), with 2 ,4 or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm thick plain colour PVC sheet on back face etc., complete all as specified and as directed.

Solid PVC door frame (single rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawings. NOTE:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life.

Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed.

Butt hinges, heavy weight, stainless steel of size 100 mm long, 35 mm over all width, and 3 mm thick and fixed complete as sepecified and as directed.

150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed.

Brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges etc complete all as specified and as directed.

TMT steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed.

All as per Sl Item No 1.023 above but 6mm to 8mm dia.

All as per Sl Item No. 1.023 above but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc complete all as specified and as directed.

Anodised aluminum powder coated (of any shade/colour as approved by GE ) ventilators of size 450x600 mm with adjustable 4mm thick figured glass louvers, fixed in qtr portion, without sash bars, aluminum section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed.

Machine cut Granite stone slab 18-20mm thick, black colured, table rubbed and polished for wall lining, veneering to wall, 12mm thick backing coat in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. etc complete all as specified and as directed.

75 mm thick plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggregate as in plinth protection etc, finished even and smooth without using extra cement complete including joints filling with sealing compound Grade "A" complete all as specified and as directed.

Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base to floors, 75mm thick complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in floors 25mm thick, as in sub base to floor complete all as specified and as directed.

Glazed coloured ceramic tiles as in vertical surfaces 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:3) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

Rendering 15mm thick in CM(1:4) mixed with water proofing compound as per manufacturers instructions finishing the surfaces even and smooth without using extra cement including necessary scaffolding complete all as specified and directed. NOTE:- WPC will be measured and paid separately under relevant items.

15mm thick rendering on brick or concrete surface in cement mortar (1:6) and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick on ceiling /RCC surfaces in cement mortar (1:3), finishing the plastered surfaces even and smooth without using extra cement all as specified and as directed.

Preparation of newly plastered wall surfaces of any description and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer all as specified and as directed.

Preparation of newly plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and directed.

16mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

20mm dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, fixed to wall, ceiling or laid in floors complete all as specified and as directed.

Rotational moulded polythene water storage tank (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and as directed.

20mm dia Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and as directed.

Gun metal gate or globe valves 25 mm dia with iron wheel head, screwed both ends for iron pipe including taking down old gate valve all as specified and as directed.

Bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed.

15mm dia pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified and as directed.

Stop valves / angle stop cock fancy type, chromium plated, brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed.

15 mm dia concussive push button taps of cast copper alloy, chromium plated, screwed for iron pipe and fixed all as specified and as directed.

PVC connections 15 mm size with PTMT nuts of length 450 mm long, all as specified and as directed.

PVC urinal waste pipe 32mm dia, 800mm long, complete all as specified and as directed.

75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings complete all as specified and as directed.

75 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings complete all as specified and as directed.

110mm bore PVC (SWR) bends, any radius, type 'B' with access door complete all as specified and as directed.

75mm bore PVC (SWR) bends, any radius, type 'B' with access door complete all as specified and as directed.

PVC (SWR) vent cowl 110 mm dia, type 'B' all as specified and as directed.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever,complete all as specified and directed.

Vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and as directed.

Viterous china urinals, bowl type (back or corner wall type), including providing and fixing plugs, beddings urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; supply and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe 40 mm bore waste, stainless steel coupling and LDPE pipe 600 mm long complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets as in roof coverings including ridges etc complete all as specified and as directed.

Dismantling of structural steel work including doors, gates but excluding framed truss etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Demolition of cement concrete and pavings not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed

Dismantling of stone sett paving of any description or thickness in floors, aprons etc., laid bedded and pointed in any cement mortar including removing off the premises complete all as specified and as directed.

Taking down cement plaster of any description hacking for key or raking out joint on old brick work / stone / concrete surface complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden surface, concrete or brick surrounds glazed with putty or fixed with beads all as specified and as directed.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to IS Fe-410-W (Gde- E-250) quality- B complete all as specified and as directed.

Fixing only Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates incl welding / riveting / nut & bolts etc complete all as specified and as directed. NOTE:- Serviceable steel sections as obtained from Sl Item No. 1.066 above shall be reused.

Rolled Mild steel work as in hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter shunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specifed and as directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tenisile strenth of 550 Mpa as in roof covering cladding to wall, fixed with self taping screwes as specified and as directed.

Decorated PVC false ceiling of size 600mm x 600mm x 5 mm thick, used as a panel insert in a frame work made out of using anodized aluminum T-section of size 25mm x 25mm in square pattern of grid size 600mm x 600mm, the aluminum frame work shall be supported from the ceiling with the help of J hook and 4 mm GI wire of required size to maintain the proper levels etc., the aluminum frame work is supported on side wall with the use of aluminum L section of size 25mm x 25mm angle complete all as specified and as directed.

25 mm thick Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in levelling course of flooring etc complete all as specified and as directed.

Non skid ceramic coloured tiles 7 to 8 mm thick Matt finished (square / rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per Sl Item No. 1.082 above but in skirtings with 10mm thick backing coat in CM(1:3).

Chequered cement concrete designer tiles of size 300 x 300 x 25mm thick, exterior grade, coloured glossy finish, rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

Machine pressed precast cement concrete inter locking paver blocks any shape and size conforming to IS 15658-2006 of 60mm thickness, of M-35 grade with grey cement and pigment fixed over and including 50mm thick M sand cushioning complete all as specified and directed.

Excavating in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and n.exc. 1.5 m in depth and getting out in hard / dense soil all as specified and as directed.

Plain Cement Concrete, type B0, (1:2:4), using 12.5mm graded stone aggregate as cement concrete surface channels and drains etc complete all as specified and and as directed.

10mm thick rendering on brick or concrete surface in cement mortar (1:4 and finishing the surface with even and smooth without using extra cement complete all as specified and directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete fixed in repairs all as specified and as directed.

Sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane all as specified and as directed.

Taking down chowkats or frames with shutters without taking off shutter from frames area exc. 1.5 sqm but n.exc. 4 sqm each, including cutting holes for removing the hold fast and making good distrubed surface of wall complete all as specified and as directed.

Rolled Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

1.25 mm thick Pressed steel frames of size 125 x 60mm for doors with one or more rebates(02 rebates) including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

Plain Cement Concrete (1:2:4), type B1, using 20mm graded stone aggregate as in copings, bed blocks, hold fasts etc., complete all as specified and directed.

35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Aluminium anodised tower bolt 200 mm long of extruded section complete all as specified and as directed.

Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed.

150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors etc complete all as specified and as directed.

300mm long, brasss ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finial caps (02 nos in each curtain rod) etc complete all as specified and as directed.

Brass Chromium plated designer bracket for curtain rod of dia 25 mm dia made out of stainless steel flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with rawl plug of size not less than 50 mm long etc complete all as specified and as directed.

Complete removal of existing treatment by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed.

2mm thick wall care putty on wall including preparation of surfaces with sand paper to obtain smooth surface complete all as specified and as directed.

Preparing newly plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed.

All as per Sl Item No. 1.105 above, but on old plastered surface of wall.

Preparing old plastered surface of wall and applying two coats of cement based paint over a coat of alakali resistent primer etc complete all as specified and as directed.

Dismantling timber scantlings 40 sq.cm and over in section as in framed work, in any position etc complete all as specified and as directed.

Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

PART II (E/M WORKS)

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan,call bell socket or power circuits) complete and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Point wiring complete with 1.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked including accessories concealed type run in walls including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed for one light point controlled by one switch.

All as per Sl Item No. 2.002 above but for one fan point controlled by one switch/regulator.

All as per Sl Item No. 2.002 above but for one 3 pin socket out let 5 Amps on independent board.

All as per Sl Item No. 2.002 above but for one 3 pin socket out let 5 Amps on same board.

Point wiring complete with 2.5 sq.mm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic PVC conduit medium density ISI marked incl accessories concealed type run on walls/ ceiling incl MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 2.5 sq.mm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. NOTE FOR Sl ITEM NO. 2.002 to 2.006 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring.

LED batten fittings, 18 watts, 6000K, (4 feet long), suitable for indoor applications wall mounted with extruded aluminium heat shink provision, efficient heat dissipation and integrated electronic driver, industrial batten type, powder coated top cover, with bipin holders, connector block , lamp etc., complete all accessories internally pre wired all as per Bajaj, Cat No.BCLAB 18 WH LED P or techno commercially equivalent makes specified in PS including connecting up twin core twisted flexible copper conductor cable all as specified and directed.

Switch Piano, flush type, 5 Amps, 240 Volts single pole with ISI marked complete all as specified and as directed.

Switch socket combination 3 & 2 pin, 5 Amps, 240 Volts, flush type multipurpose controlled by one switch all as specified and as directed.

MCB single pole 240 Volts, 5 to 40 Amps complete all as specified and as directed.

MCB single pole and neutral 240 Volts, 5 to 40 Amps complete all as specified and as directed.

MCB DB, SPN 4 ways, 240 Volts with 200 Amps rated busbar, double door for housing MCBs all as specified and as directed.

Ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals all as specified and as directed.

LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories all as per Bajaj Cat No. BCLSB 10 WH or techno commercially equivalent makes specified in PS including taking out old fittings all as specified and directed.

LED bulk head fitting of 10 Watts, energy efficient IP 65, luminaires / lamp complete all as per Bajaj Cat No. BIBWP 10 W LED or techno commercially equivalent makes including taking out old fittings all as specified and directed.

Switch socket combination 2 in 1, 3 pin and 2 pin, 5 and 15 Amps flush type, universal complete all as specified and as directed

Socket outlet 2 in 1, 3 pin 5 A all as specified and as directed.

MCB TPN 415 volts 63 Amps including taking down the existing complete as specified and as directed.

MCB DB, TPN 8 ways, 240 Volts with 200 Amps rated busbar, double door for housing MCBs all as specified and as directed.

MCB DB TPN 4 ways, double door with acrlic window, 240 volts with 200 Amps rated busbar for housing MCBs ncluding taking down the existing un serviceable MCB DB complete all as specified and as directed.

Stepped type electronic fan regulator flush switch type all as specified and as directed.

Sub main wiring complete with two runs of 6 sq.mm single core PVC insulated FRLS multistranded copper conductor cable 1100 volts grade, with one run of 6 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, concealed type drawn through non metallic rigid PVC conduit and conduit accessories including taking down the existing all as specified and as directed. NOTE :- Two runs of cable, one run of earth wire and one run of cinduit shall be measured as one unit for payment purpose.

Sub main wiring complete with two runs of 4 sq.mm single core PVC insulated FRLS multistranded copper conductor cable 1100 volts grade, with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, concealed type drawn through non metallic rigid PVC conduit and conduit accessories including taking down the existing all as specified and as directed. NOTE :- Two runs of cable, one run of earth wire and one run of cinduit shall be measured as one unit for payment purpose.

Earthing complete with galvanised steel plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge not less than 1.5 m below ground level connected to earth lead by GI wire 4 mm dia by means of bolts nuts, check nuts, washers made out of galvanised iron connected to main switch all as shown in elect plate No 3 of MES SSR Part -I includingn excavation and earth work in any type of soil,funnel, 20 mm dia light grade GI watering pipe with chamber of PCC 1:3:6 type C1 40mm thick of size 450mm x450mm (1:2:4) type B1 for cover slab reinforced with 8mm dia TMT bars 10cm c/c both ways and with 6mm MS hook etc complete all as specified including testing on completion all as specified and directed.

Supply and fixing 30 W LED bldg security light fitting with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings. Make:- Bajaj, Cat No.:- ENXT P 30L WH SY PC SD or Equivalent Makes & model

Brackets made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc before fixing applying two coats of aluminum paint over a coat of red oxide primer and removing the old existing GI bracket from building complete all as specified and as directed.

Anand Constructions

m/s raghavendra kulkarni

OM CONSTRUCTIONS

Adithya Enterprises