Supply, Installation and Commissioning of Furniture work under Pkg-II for Vanijya Bhawan,16AAkbar,Road, New Delhi.

SUMMARY OF ESTIMATED COST

Name of Work - Supply, Installation & Commissioning of Furniture work under Pkg-II for Vanijya

Bhawan, 16A Akbar,Road, New Delhi

S.N COST HEAD Amount (in Figure) Remark

Level I (Customised furniture for Minister's 412,86,617.83

Area,Secretary , Special Secretary lvl)

Level II ( Secretary , Special Secretary lvl, Joint Secretary

lvl,Add. Secretary lvl, P.A/P.S lvl, Director)

Level III (UNDER SECRETARY, WORKSTATION, COMMON 1267,78,239.86

Total Estimated Cost ( including G.S.T) 2236,04,289.41

Digitally signed by

SURENDRA SURENDRA KUMAR MEENA

KUMAR MEENA Date:

B.O.Q OF LEVEL I(CUSTOMIZED FURNITURE) FOR VANIJYA BHAWAN

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

A MOS AND COMMERCE MINISTER (5TH FLOOR)

Providing and fixing in wall panneling 12mm commercial ply fixed with 12x 25mm

aluminium frame work then 12 mm thick MDF Board to be fixed over it and on the top

3.5mm Premium category Veneer lining with necessary screws /synthetic resin

adhesiveed to be fix including making of grooves whose sides also to be finished by

1 fixing 3.5 mm thick Premium category veneer on all exposed faces with necessary 141 SQMT 8,584.54 12,10,419.49

adhesive etc,teak wood cornice at top of 100mm x 120mm, finishing with melamine

polish (matt finish) on all veenered surfaces etc. all complete .as per architectural

drawings and the direction of Engineer -in-charge (Premium category Veneer base

price 600 Rs/ Sqft)

Providing & fixing in position Main table for Minister on details as per architectural

drawing of size 3600x1200x750mm (ht.) in single unit,Top to be made out of double

layer of 19mm thk. board + 3.5mm to 4mm thk. Premium category Veneer on exposed

surfaces. All other surfaces to be pasted with veneer on inner surface only,Drawers to

be made out of 19mm thk. board + 3.5mm thk. Premium category Veneer on exposed

and horizontal surfaces. All other surfaces to be pasted with 3.5mm to 4mm

2 veneer,Shutter to be made out of 19mm thk. board +3.5mm thk. Premium category 2 No. 4,22,454.96 8,44,909.92

Veneer on exposed surfaces. All other surfaces to be pasted with3.5mm to 4mm

veneer ,and in middle portion with leatherette for writing of size 1500x600 i/c titghtning

with 6mm mdf board ,necessary moulding and lipping of teakwood etc. of approved

make , finishing with melamine polish (matt finish) on all surfaces etc.,8mm toughened

glass on top of table complete in all respect as per specification and direction of

Engineer-in-charge (Premium category Veneer base price 600 Rs/ Sqft)

Providing and placing in position 1250 lenght,600mm deep, 750mm height low height

side cabinet of Minister's table made with 19mm commercial block board with

3.5mm/4mm thk. Premium category Veneer on exposed surface and rest area pasted

3 with 3.5 mm to 4mm thk veneer as per drawing, drawers mounted on telescopic sliding 2 No. 1,12,653.70 2,25,307.41

channel, providing with 3mm oak wood lipping all round shutters fixed with auto closing

hinges, the unit finished with melamine polishing all complete as per approved drawing

and as per direction of Engineer-in-charge.

Providing and placing in position 5200 lenght, 600mm deep, 3000mm ht wall back

cabinet made with 19mm commercial block board with 3.5mm thick decorative veneer

on exposed surface and rest area pasted with 3.5 mm to 4mm thk veneer as per

4 drawing, drawers mounted on telescopic sliding channel, providing with 3mm oak wood 2 No. 3,44,294.81 6,88,589.62

lipping all round shutters fixed with auto closing hinges, teak wood cornice at top of

100mm x 120mm ,the unit finished with melamine polishing all complete as per

approved drawing and as per direction of Engineer-in-charge

Providing and placing chester field sofa of standard size as per design. Sofa frame

shall be made up of hard wood and chrome legs. The cushioned seat and back should

be upholstered with high quality Leather. The foam shall be made of polyurethane

having density of 40- 45 kg/cubic meter. The rate of high quality Leather used shall be

approx Rs. 1500/ sq mt.etc complete as per the approved sample. Complete and as

per apprroved sample and as per the direction of Engineer-In-charge

Providing and placing in position wooden centre table in required shape, design and

curve of size 1200mm x 600mm x 450mm made up of teak wood work. The top having

12mm thick float glass with decorative edge moulding fixed in 2nd class teak wood

having minimum width of 40mm duly carved and moulded alround the glass top. The

6 vertical drop from top of centre table shall not be less than 75mm and shall be made in 6 No. 24,845.45 1,49,072.73

2nd class teak wood work with decorative carving, curve and design on the wooden

surface. The unit shall have 4 Nos. ornamental legs made with 2nd class teak wood

including melamine polishing with the required finished surface, all complete as per

approved sample and direction of Engineer-in-charge.

Providing and placing in position wooden side table in required shape, design and

curve of size 600mm dia x 450mm ht made up of teak wood work. The top having

made up of 12 mm ply with 3.5 mm premium quality veener with decorative edge

moulding fixed in 2nd class teak wood having minimum width of 25mm duly carved and

moulded alround the top with brass inlay work . The vertical drop from top of centre

table shall not be less than 50mm and shall be made in 2nd class teak wood work with

decorative carving, curve and design on the wooden surface. The unit shall have 3

Nos. ornamental legs made with 2nd class teak wood including melamine polishing and

casted brass paws at bottom with the required finished surface, all complete as per

approved sample and direction of Engineer-in-charge.

Providing and placing in position set of 3 wooden nester table in required shape,

design and curve of size (600mm x 600mm x 450mm),(525mm x 525mm x

400mm),(450mm x 450mm x 350mm)made up of teak wood work. The top having

italian veneer top with marquetry work Iin 2nd class teak wood having minimum width

of 25mm duly carved and moulded alround the glass top. The vertical drop from top of

centre table shall not be less than 50mm and shall be made in 2nd class teak wood

work with decorative carving, curve and design on the wooden surface. The unit shall

have 4 Nos. ornamental legs made with 2nd class teak wood including melamine

polishing with the required finished surface, all complete as per approved sample and

direction of Engineer-in-charge.

Providing and placing in position console of overall size 1800x600 with a height of

750mm with the followings: i) The top having made up of 19 mm board with 3.5 mm

premium quality veener with decorative edge moulding fixed in 2nd class teak wood

having minimum width of 25mm duly carved and moulded alround the top with brass

inlay work on the top of console. ii) The vertical drop and legs will be in required curved

shape and design and shall be made with 2nd class teak wood. iii) The bottom of

vertical legs shall be joined together at nearly 100mm height with 19mm commercial

9 board covered with 3.5mm thick decorative veneer glued together with synthetic resin 5 No. 75,345.60 3,76,727.98

and nails. iv) Drawers to be made out of 19mm thk. board + 3.5mm thk. Premium

category Veneer on exposed and horizontal surfaces. All other surfaces to be pasted

with 1mm matching laminate,Shutter to be made out of 19mm thk. board +3.5mm thk.

Premium category Veneer on exposed surfaces. All other surfaces to be pasted 3.5mm

to 4mm venee, all complete as per direction of Engineer-in-Charge. v) All exposed

surface of console shall be finished with required coats of melamine polishing, all

complete as per direction of Engineer-in-Charge.

Providing and placing in position console of overall size 1800x600 with a height of

750mm with the followings: i) The top having made up of 19 mm board with 3.5 mm

premium quality veener with decorative edge moulding fixed in 2nd class teak wood

having minimum width of 25mm duly carved and moulded alround the top with brass

inlay work on the top of console. ii) The vertical drop and legs will be in required curved

10 shape and design and shall be made with 2nd class teak wood. iii) The bottom of 11 No. 49,288.08 5,42,168.89

vertical legs shall be joined together at nearly 100mm height with 19mm commercial

board covered with 3.5mm thick decorative veneer glued together with synthetic resin

and nails.iv) All exposed surface of console shall be finished with required coats of

melamine polishing,gold polish at boyttom all complete as per direction of Engineer-in-

Providing and placing wooden 3 seater sofa madeup of hard wood frame work, the

seat having 100mm thick and back having 75mm thick, made with HDU foam of of

approved brand and manufacturer with a minimum density of 40Kg/Cum duly covered

with upholstered having fabric (Market rate upto Rs. 800.00 per meter length + 10%

variation) with intricatte english carving on arms & legs, complete as per approved

sketch and as per direction of Engineer-In-Charge.

Providing and placing exposed teak wood occasional chair madeup of hard wood frame

work, the seat having 100mm thick and high back having 75mm thick, made with HDU

foam of approved brand and manufacturer with a minimum density of 40Kg/Cum duly

covered with upholstered having fabric (Market rate upto Rs. 800.00 per meter length +

10% variation) with quilting of stiched buttons of same fabric & cussion ,complete as

per approved sketch and as per direction of Engineer-In-Charge.

Providing and placing in position wooden centre table in required shape, design and

curve of size 1200mm x 600mm x 450mm made up of teak wood work. The top having

made up of 12 mm ply with 3.5 mm premium quality veener with decorative edge

moulding fixed in 2nd class teak wood having minimum width of 25mm duly carved and

moulded alround the top with brass inlay work. The vertical drop from top of centre

table shall not be less than 75mm and shall be made in 2nd class teak wood work with

decorative carving, curve and design on the wooden surface. The unit shall have 4

Nos. ornamental legs made with 2nd class teak wood including melamine polishing

with the required finished surface, all complete as per approved sample and direction

of Engineer-in-charge.

Providing and fixing 1800 wide 600 mm deep x 2400 ht box type wooden cupboard

made out of 19 mm solid block board with commercial ply veneering in both sides for

the shelves, drawers and boxing and for the shutters with teak wood margin on all

exposed edges of the board with necessary piano hinges one side of shutters made of

12mm ply + 9 mm thick ply with 3.5 mm thick Premium category veneer on exposed

surface and rest of the faces shall be of 1mm laminate with necessary adhesive etc

,finishing with melamine polish (matt finish) on all veneered surfaces etc.complete as

per design and drawings, and Photographs and direction of the Engineer in Charge.

Providing and placing in position wooden meeting table in required shape, design and

curve of size (4200mm x 1500mm x 800mm),made up of teak wood work. The top

having italian veneer top with marquetry work Iin 2nd class teak wood having minimum

width of 100 mm duly carved and moulded alround the top. The vertical drop from top

of centre table shall not be less than 50mm and shall be made in 2nd class teak wood

work with decorative carving, curve and design on the wooden surface. The unit shall

have 2 Nos. ornamental legs with pedestal made with 2nd class teak wood including

melamine polishing with the required finished surface, all complete as per approved

sample and direction of Engineer-in-charge. (Premium category Veneer base price 600

Providing and placing in position wooden meeting table in required shape, design and

curve of size (2200mm x 1500mm x 800mm),made up of teak wood work. The top

having italian veneer top with marquetry work Iin 2nd class teak wood having minimum

width of 100 mm duly carved and moulded alround the top. The vertical drop from top

of centre table shall not be less than 50mm and shall be made in 2nd class teak wood

work with decorative carving, curve and design on the wooden surface. The unit shall

have 2 Nos. ornamental legs with pedestal made with 2nd class teak wood including

melamine polishing with the required finished surface, all complete as per approved

sample and direction of Engineer-in-charge. (Premium category Veneer base price 600

Providing and placing director chair with quilted leather, high back having 75mm thick,

made with HDU foam of sweepwell make or equivalent make of approved brand and

manufacturer with a minimum density of 40Kg/Cum duly covered with upholstered

having Leather ( approx Rs. 1500/ sq mt + 10% variation) with quilting of stiched

buttons of same Leather &,complete as per approved sketch and as per direction of

Engineer-In-Charge.

Providing and placing in position premium wooden visitor chair made with teak wood

frame work in seat and back with 50mm thick HDU foam of “splash” make duel

18 upholstered with leatherette of approved shade including melamine polishing. The size 8 No. 35,097.32 2,80,778.55

of back 600mm x560mm and size of seat 580mm x 500mm all complete as per

approved sample and as per direction of Engineer-in-charge.

Providing and placing in position premium wooden meeting table chair made with teak

wood frame work in seat and back with 50mm thick HDU foam of approved make duel

19 upholstered with fabric of approved shade including melamine polishing. The size of 24 No. 21,645.47 5,19,491.32

back 600mm x560mm and size of seat 580mm x 500mm all complete as per approved

sample and as per direction of Engineer-in-charge.

ELEVATOR FOR READING,

20 READING LAMP,STATIONARY STAND 2 No. 3,938.90 7,877.80

Providing and placing chester field sofa of standard size as per design. Sofa frame

shall be made up of hard wood and chrome legs. The cushioned seat and back should

be upholstered with high quality faux Leather. The foam shall be made of polyurethane

having density of 40- 45 kg/cubic meter. The rate of high quality Leather used shall be

approx Rs. 800/ mt.etc complete as per the approved sample. Complete and as per

apprroved sample and as per the direction of Engineer-In-charge

Providing and placing in position console of overall size 1200x460x690mm made with

19mm commercial block board with 3.5mm thick decorative veneer on exposed

surface. The console is provided with two drawers with telescoping sliding channels

and S.S. handles. The four decorative legs of console made up of 50x50mm teakwood

joint with another teakwood frame of 50x40mm i/c melamine polishing, all complete as

per direction of Engineer-in-Charge.

Providing and placing in position wooden centre table of size 1200mm x 600mm

450mm made up of teak wood frame work. The top having 12mm thick float glass with

24 decorative edge moulding, the unit having ornamental legs including melamine 58 No. 18,583.74 10,77,856.77

polishing, all complete as per approved sample and as per direction of Engineer-in-

Providing and placing in position wooden round side table of 600mm dia x 580 mm

high mode up of teak wood frame work, the top having 19mm thick commercial block

board with 3.5mm thick decorative veneer with decorative edge moulding, the unit

having ornamental legs including melamine polishing, all complete as per approved

sample and as per direction of Engineer-in-charge. (Premium category Veneer base

price 600 Rs/ Sqft)

Providing and placing in position 1800 lenght,600mm deep, 3000mm ht wall back

cabinet made with 19mm commercial block board with 3.5mm thick decorative veneer

26 on exposed surface as per drawing, teak wood cornice at top of 100mm x 120mm , in 1 No. 3,43,581.64 3,43,581.64

build electrical fire place the unit finished with melamine polishing all complete as per

approved drawing and as per direction of Engineer-in-charge

Providing and placing exposed teak wood occasional chair madeup of hard wood frame

work, the seat having 100mm thick and high back having 75mm thick, made with HDU

foam of sweepwell make or equivalent make of approved brand and manufacturer with

a minimum density of 40Kg/Cum duly covered with upholstered having high quality

leather with quilting of stiched buttons of same fabric & cussion ,complete as per

approved sketch and as per direction of Engineer-In-Charge.

Providing and placing in position wooden side table in required shape, design and

curve of size 750mm dia x 450mm ht made up of teak wood work. The top having

made up of 12 mm ply with 3.5 mm premium quality veener with decorative edge

moulding fixed in 2nd class teak wood having minimum width of 25mm duly carved and

moulded alround the top with brass inlay work . The vertical drop from top of centre

table shall not be less than 50mm and shall be made in 2nd class teak wood work with

decorative carving, curve and design on the wooden surface. The unit shall have 3

Nos. ornamental legs made with 2nd class teak wood including melamine polishing and

casted brass paws at bottom with the required finished surface, all complete as per

approved sample and direction of Engineer-in-charge.

Providing and placing wooden bench made in 19mm commercial block board single

layer on back side and double layer on side and legs with 3.5mm thick decorative

veneer pasted all around , complete with solid oak wooden beading at edges. Finished

in melamine natural polishing, seat with 75 mm (50+25) thick and back made in 50mm

U-form with approved colour leatherette upholstered as per direction of Engineer-in-

Charge.(size 5000x650)

30 Providing and placing flag post made up of brass as per sketch 2 No. 8,461.78 16,923.56

31 Persian Hand Knotted, 150 and 120 Knotts, Pure Silk 0.00

Fine Persian Hand Knotted, 100% Fine Filament Mulberry Silk with 150

Knots per square inch (+- 5%) Manufacturing & Supplying of Hand knotted rug

manufactured from 2 ply Filament Mulberry Silk of 55/60 grade, Warp - Tana 1466 &

Bhutan 773, Weft - Sariya 1759 & Bhutan 879, warp yarn- 12/20 cotton, Tharri-10/20

cotton, Lachhi 4/20 cotton) in required shape & shade with 150 Knots per square inch

(+- 5%) , pile height 7 to 8 mm, Density 4500 to 4600 gsm /-sqmt. Tolerance allowed (+-

Fine Persian Hand Knotted, 100% Fine Filament Mulberry Silk with 120

Knots per square inch (+- 5%) Manufacturing & Supplying of Hand knotted rug

manufactured from 2 ply Filament Mulberry Silk of 55/60 grade, Warp - Tana 1333 &

Bhutan 666, Weft - Sariya 1535 & Bhutan 767, warp yarn- 12/20 cotton, Tharri-10/20

cotton, Lachhi 4/20 cotton) in required shape & shade with 150 Knots per square inch

(+- 5%) , pile height 7 to 8 mm, Density 4500 to 4600 gsm /-sqmt. Tolerance allowed (+-

32 Persian Hand Knotted, 100 Knotts, Wool & Viscose 0.00

Fine Persian Hand Knotted, Semi-Worsted Wool & 100% Fine Filament Viscose/Art

Silk with 100 Knots per square inch (+- 5%) Manufacturing &

Supplying of Hand knotted rug manufactured from 1 ply Semi-Worsted Wool & 1 ply

Fine Filament Viscose/Art \Silk of 55/60 grade, Warp - Tana 1066 & Bhutan 533, Weft -

Sariya 1120 & Bhutan 560, warp yarn- 12/20 cotton, Tharri-10/20 cotton, Lachhi 4/20

cotton) in required shape & shade with 100 Knots per square inch (+- 5%) , pile height

7 to 8 mm, Density 4500 to 4600 gsm /-sqmt. Tolerance allowed (+- 5%) etc.

32.2 Persian Hand Knotted, 80 Knotts, Viscose 0.00

Fine Persian Hand Knotted, 100% Fine Filament Viscose/Art Silk with 80

Knots per square inch (+- 5%)

Manufacturing & Supplying of Hand knotted rug manufactured from 2 ply Filament

Mulberry Silk of 55/60 grade, Warp - Tana 800 & Bhutan 400, Weft - Sariya 682 &

Bhutan 341, warp yarn- 12/20 cotton, Tharri-10/20 cotton, Lachhi 4/20 cotton) in

required shape & shade with 80 Knots per square inch (+- 5%) , pile height 7 to 8 mm,

Density 4500 to 4600 gsm /-sqmt. Tolerance allowed (+- 5%) etc.

Providing & fixing in position Meeting table in rectangular shape on details as per

architectural drawing of size (7600mmx1800mm in plan750mm (ht.) in single unit,Top,

sides, front to be made out of double layer of 19mm thk. board + 3.5mm thk. Veneer on

exposed surfaces. All other surfaces to be pasted with 3.5mm to 4mm

veneer,necessary moulding and lipping of teakwood etc. of approved make , finishing

with melamine polish (matt finish) on all surfaces etc. complete in all respect as per

specification and direction of Engineer-in-charge (Premium category Veneer base

price 300 Rs/ Sqft)

Providing and placing director chair with quilted leatherite, high back having 75mm

thick, made with HDU foam of sweepwell make or equivalent make of approved brand

and manufacturer with a minimum density of 40Kg/Cum duly covered with upholstered

having Leather ( approx Rs. 1500/ sq mt + 10% variation) with quilting of stiched

buttons of same Leather &,complete as per approved sketch and as per direction of

Engineer-In-Charge.

Providing and placing director chair with quilted leatherite, high back having 75mm

thick, made with HDU foam of sweepwell make or equivalent make of approved brand

and manufacturer with a minimum density of 40Kg/Cum duly covered with upholstered

having Leather ( approx Rs. 1500/ sq mt + 10% variation) with quilting of stiched

buttons of same Leather &,complete as per approved sketch and as per direction of

Engineer-In-Charge.

Providing and supplying ReceptionDesk having Dimension 4000mm L x 900mm x

1185mm Height . made out of double layer of 19mm thk. board + 3.5mm thk. Veneer

on exposed surfaces. All other surfaces to be pasted with 1mm matching laminate,

12mm thick corian is pasted on 19 mm block board in front with led cove lighting

,necessary moulding and lipping of teakwood etc. Unit has 2 Pull out drawer with Lock

and Handle.of approved make , finishing with melamine polish (matt finish) on all

surfaces etc. complete in all respect as per specification and direction of Engineer-in-

charge (Premium category Veneer base price 300 Rs/ Sqft)

Providing and placing wooden 3 seater sofa madeup of hard wood frame work, the

seat having 100mm thick and back having 75mm thick, made with HDU foam of

sweepwell make or equivalent make of approved brand and manufacturer with a

37 minimum density of 40Kg/Cum duly covered with upholstered having fabric (Market rate 11 No. 53,933.72 5,93,270.89

upto Rs. 800.00 per meter length + 10% variation) with intricatte english carving on

arms & legs, complete as per approved sketch and as per direction of Engineer-In-

Charge.( FOR SECRETARY AND SPECIAL SECRETARY CHAMBER )

Providing and placing wooden 2 seater sofa madeup of hard wood frame work, the

seat having 100mm thick and back having 75mm thick, made with HDU foam of

sweepwell make or equivalent make of approved brand and manufacturer with a

38 minimum density of 40Kg/Cum duly covered with upholstered having fabric (Market rate 7 No. 39,591.60 2,77,141.17

upto Rs. 800.00 per meter length + 10% variation) with intricatte english carving on

arms & legs, complete as per approved sketch and as per direction of Engineer-In-

Charge.( FOR SECRETARY AND SPECIAL SECRETARY CHAMBER )

Providing and placing wooden 1 seater sofa madeup of hard wood frame work, the

seat having 100mm thick and back having 75mm thick, made with HDU foam of

sweepwell make or equivalent make of approved brand and manufacturer with a

39 minimum density of 40Kg/Cum duly covered with upholstered having fabric (Market rate 7 No. 24,542.74 1,71,799.16

upto Rs. 800.00 per meter length + 10% variation) with intricatte english carving on

arms & legs, complete as per approved sketch and as per direction of Engineer-In-

Charge.( FOR SECRETARY AND SPECIAL SECRETARY CHAMBER )

INCUMBENCY BOARD: 36"x45"

18mm water proof plywood with rosewood finishing and mouldings on corner as per

design and plates and fixing as per the direction of Engineer-In-charge.

Brass metal etched signage with fixing on wooden mount shall be provided.

Total amount for Level I furniture 41286617.83

Total amount for Level I furniture 41286617.83

B.O.Q OF LEVEL II FURNITURE FOR VANIJYA BHAWAN ANNEXURE-II

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

B SECRETARY AND SPECIAL SECRETARY CHAMBER

Providing & fixing in position Main table for Secretary on details as per architectural

drawing of size 3000x1200x750mm (ht.) in single unit,Top to be made out of double layer

of 19mm thk. board + 3.5mm thk. Premium category Veneer on exposed surfaces. All

other surfaces to be pasted with 1mm matching laminate,Drawers to be made out of

19mm thk. board + 3.5mm thk. Premium category Veneer on exposed and horizontal

surfaces. All other surfaces to be pasted with 1mm matching laminate,Shutter to be made

41 out of 19mm thk. board +3.5mm thk. Premium category Veneer on exposed surfaces. All 3 No. 3,69,934.72 11,09,804.16

other surfaces to be pasted with 1mm matching laminate,and in middle portion with

leatherette for writing of size 1500x600 i/c titghtning with 6mm mdf board ,necessary

moulding and lipping of teakwood etc. of approved make , finishing with melamine polish

(matt finish) on all surfaces etc.,8mm toughened glass on top of table complete in all

respect as per specification and direction of Engineer-in-charge (Premium category

Veneer base price 600 Rs/ Sqft)

Providing and placing in position 1250 lenght,600mm deep, 750mm height low height side

cabinet of Minister's table made with 19mm commercial block board with 3.5mm thk.

Premium category Veneer on exposed surface and rest area pasted with 1mm thick

42 laminate as per drawing, drawers mounted on telescopic sliding channel, providing with 3 No. 1,05,367.04 3,16,101.11

3mm oak wood lipping all round shutters fixed with auto closing hinges, the unit finished

with melamine polishing all complete as per approved drawing and as per direction of

Engineer-in-charge.

Providing and placing in position 5200 lenght, 600mm deep, 3000mm ht wall back cabinet

made with 19mm commercial block board with 3.5mm thick decorative veneer on exposed

surface and rest area pasted with 1mm thick laminate as per drawing, drawers mounted on

43 telescopic sliding channel, providing with 3mm oak wood lipping all round shutters fixed 3 No. 4,29,048.00 12,87,144.00

with auto closing hinges, teak wood cornice at top of 100mm x 120mm ,the unit finished

with melamine polishing all complete as per approved drawing and as per direction of

Engineer-in-charge

Providing and placing of chair in brisa leather with headrest

Seat, and backrest made of CFC freepolyurethane foam upholstered with 100% brisa

leather. MECHANISM:- Chair should Provide total back support, from the pelvic and

lumbar region to the thoracic region.The built-in Wave Suspension should be fitted with a

three-dimensional outer layer. Lofted brisa leather to provide support and breathability.

Back also in brisa leather

44 Headrest to be Mounted to the back for total body support in the reclined or upright posture 0.00

with adjustment range: 2.5" (64mm) To be provided with 4D arms allow fluid adjustment in

four directions.Height adjustment range: 4.8" -6". Side-to-side arm cap adjustment range:

15" (381mm); 7.5"(190mm) per arm cap. Front-to back adjustment range: 3.5" - 5".

Pivoting arm caps: 40-50° in and 40-50° out Lumbar Support should Adjust up and down

to the curvature of your back. Adjustment Range: 4"-6"

Pneumatic Height Adjustment with Standard range: 16.5"–21.5" (419mm-546mm)

Seat Depth Adjustment of 3" (76mm) to 4" range

Tilt Tension Control to be provided to regulate the amount of resistance felt when leaning

back in the chair and the effort required to recline the chair backwards.Forward Tilt

adjustment should be included to allow seat pan to move downward from the initial

position with 5 -8° downward Back should recline 24-30° from upright position. Back stop

with 5 positions–upright and every 7-9° of recline DIMENSIONS: 29" ( W) x 49.5" (H) x 3 No. 45,467.17 1,36,401.51

BASE:-Five star base of polished die cast aluminium with hard or soft castors.

WARRANTY: 12 Years Product should be GREENGUARD® certified & BIFMA level 3®

certified And should eadhere to ANSI/HFES 100-2007, BIFMA G1-2013 & EN 1335-

1:2000.The Product should be complete as per the approved sample and as per the

direction of engineer incharge.( ± 5% Varaition allowed)

Providing and placing in position premium wooden meeting table chair made with teak

wood frame work in seat and back with 50mm thick HDU foam of approved make duel

45 upholstered with fabric of approved shade including melamine polishing. The size of back 16 No. 35,097.32 5,61,557.09

600mm x560mm and size of seat 580mm x 500mm all complete as per approved sample

and as per direction of Engineer-in-charge.

Supply & Installation of factory made Meeting Table for 8-10 pax of size

3400x1200x745ht. The worktop to be with 35-40 mm thick MDF with Veneer top 0.5-

0.6mm as per required with designer leg system with understructure framework. Edges

are shaped with bevel technique. . The vertical drop from top of centre table shall not be

less than 50mm and shall be made in 35-40 inch MDF with veneer finish with edge detail.

46 The unit shall have 2 Nos. ornamental legs with 100-150 mm thk pedestal made with 3 No. 1,93,570.96 5,80,712.89

board finished with veneer all complete as per approved sample and direction of Engineer-

Supplying of designer mid back chair in fabric upholstery with frame in plywood

SEAT : Firm seat cushion with CFC free polyurethane foam fabric upholstered

BACKREST : CFC free polyurethane foam fabric upholstered

dynamic spring steel linkage, with elastomer damping, coated in chrome optic and

47 standing column pivotable, with self-return mechanism, chromed, fully upholstered shell. 28 No. 16,387.25 4,58,843.00

Four-star base, polished aluminium with plastic gliders

arm-caps upholstered with fabric. closed armrests fully upholstered

Dimesnions - 1000mmH x 650W x 690D WARRANTY: 5 years against any manufacturing

defect ( ± 5% Varaition allowed)

Supplying of high back chair in fabric upholstery with frame in plywood

SEAT : Firm seat cushion with CFC free polyurethane foam fabric upholstered

BACKREST : CFC free polyurethane foam fabric upholstered

dynamic spring steel linkage, with elastomer damping, coated in chrome optic and

standing column pivotable, with self-return mechanism, chromed, fully upholstered shell.

48 Four-star base, polished aluminium with plastic gliders 3 No. 17,281.10 51,843.30

arm-caps upholstered with fabric. closed armrests fully upholstered

Dimesnions - 1200mmH x 700W x 690D. WARRANTY: 5 years against any manufacturing

B.O.Q OF LEVEL II FURNITURE FOR VANIJYA BHAWAN ANNEXURE-II

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

Providing and placing console of size 1500 x 450mm and height 1200mm ith

sliding/openable storage veneer finish below. Finishes and Material: Made from Veneer

tops MDF panels total thickness: 35-40 mm, density 740kg/m`, covered in real wood

veneer 0.5- 0.6 mm. The wood is carefully selected and comes from sustainable sources.

With an engineered composite panel with a minimum 90% wood fiber content, at least

10% post consumer, and 80% pre-consumer wood fiber-bondedwith resin. The composite

panel is 3rd party certified compliant with Air Resource Board requirements for Phase 2

formaldehyde emission levels, and includes wood fiber sourced from FSC certified forests,

using the 70% FSC Mix Credit System.Worksurfaces, including Desks ,Common Modular

Tops and Modular Credenza Worksurfaces are 1 3/16” (30mm) thick and are made of

woodcomposite core. Surface finishes : Veneer.Veneer worksurfaces are balanced

construction with wood veneer on the top, a balancing backer on the bottom, and are

available with the following wood edges: 0.98” (3.0mm) thick Square Wood Edge. 1”

(25.4mm) thick Bevel profiled wood edge. 1” (25.4mm) thick Radius profiled wood edge.1”

(25.4mm) thick Traditional profiled wood edge

Square wood edge and profiled edges are applied to both visitor and user sides of Single

Pedestal Desks, Double Pedestal Desks, Desk Shells, Common Modular Worksurfaces,

Convergent T-Desks, Attached Convergent P-tops, P-top Convergent Desks, Attached

Convergent D-tops and D-top Convergent Desks and Keystone Desks. They are applied

only to the user side of Returns, Bridges, Modular Credenza Worksurfaces, Pre-configured

Credenzas,and Corner Shells. The connecting edges of Return Tops, Bridges and 3 No. 38,316.37 1,14,949.11

Attached Convergent Tops receive a counter profile when the Bevel, Radius and

Traditional profiled wood edges are specified. All additional edges are 0.04” (1mm) wood

edgeband The final design shall be as per Architect's choice. The Product should be

complete as per the approved sample and as per the direction of engineer incharge.

Warranty 5 years ( ± 5% Varaition allowed)

Book shelf (2000 x 450 x 2100) mad eout of 18 mm thick Pre Laminated Particle Board

with matching 2 mm thick edge Banding. All the exposed edges are with 2mm PVC egde

Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The

50 back of the unit is made from 18mm prelaminated board. All the exposed edges are with 3 No. 38,316.37 1,14,949.11

2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported

edge banding.. Back The units are assembled by knock down fittings such as Minifix &

Dowels.( ± 5% Varaition allowed)

Providing and fixing 2100 wide 600 mm deep x 2400 ht box type wooden cupboard made

out of 19 mm solid block board with commercial ply veneering in both sides for the

shelves, drawers and boxing and for the shutters with teak wood margin on all exposed

edges of the board with necessary piano hinges one side of shutters made of 12mm ply +

51 9 mm thick ply with 3.5 mm thick and 12mm glass in between. Premium category veneer 6 No. 1,04,878.40 6,29,270.40

on exposed surface and rest of the faces shall be of 1mm laminate with necessary

adhesive etc ,finishing with melamine polish (matt finish) on all veneered surfaces

etc.complete as per design and drawings, and Photographs and direction of the Engineer

C ADD. SECRETARY/ JOINT SECRETARY 0.00

Providing and fixing of table for office of following specifications and size

Natural Veneer Finishes Worktop with Main Table: 2700x900mmx750mm with addititional

table of size 1000 mm x 600 x 745 mm with Left/Right Handness Return storage of Size:

1200mmx450mm with Complete wire Management and Pedestal Units , Back Storages

with Sliding/openable Mechanism and Size of 2700(L)x 1000m(D)x750(H)mm Length.

Finishes and Material: Made from Veneer tops MDF panels total thickness: 35-40 mm,

density 740kg/m`, covered in real wood veneer 0.5- 0.6 mmwith an engineered composite

panel with a minimum 90% wood fiber content, at least 10% post consumer, and 80% pre-

52 consumer wood fiber-bondedwith resin. Table top joined to front and side panels through 0.00

polshed metal studs. The composite panel is 3rd party certified compliant with Air

Resource Board requirements for Phase 2 formaldehyde emission levels, and includes

wood fiber sourced from FSC certified forests, using the 70% FSC Mix Credit

System.Worksurfaces, including Desks ,Common Modular Tops and Modular Credenza

Worksurfaces are 1 3/16” (30mm) thick and are made of woodcomposite core. Surface

finishes : (Premium category Veneer base price 450 Rs/ Sqft)

Veneer worksurfaces are balanced construction with wood veneer on the top, a balancing

backer on the bottom, and are available with the following wood edges: • 0.98” (3.0mm)

thick Square Wood Edge • 1” (25.4mm) thick Bevel profiled wood edge • 1” (25.4mm)

thick Radius profiled wood edge • 1” (25.4mm) thick Traditional profiled wood edge Square

wood edge and profiled edges are applied to both visitor and user sides of Single Pedestal

Desks, Double Pedestal Desks, Desk Shells, Common Modular Worksurfaces, Convergent

T-Desks, Attached Convergent P-tops, P-top Convergent Desks, Attached Convergent D- 39 N0. 2,80,430.54 109,36,791.06

tops and D-top Convergent Desks and Keystone Desks. They are applied only to the user

side of Returns, Bridges, Modular Credenza Worksurfaces, Pre-configured Credenzas,and

Corner Shells. The connecting edges of Return Tops, Bridges and Attached Convergent

Tops receive a counter profile when the Bevel, Radius and Traditional profiled wood edges

are specified. All additional edges are 0.04” (1mm) wood edgeband Warranty 5 Years

book shelf (2000 x 450 x 2100) mad eout of 18 mm thick Pre Laminated Particle Board

with matching 2 mm thick edge Banding. All the exposed edges are with 2mm PVC egde

Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The

53 back of the unit is made from 18mm prelaminated board. All the exposed edges are with 26 N0. 39,091.04 10,16,367.04

2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported

edge banding.. Back The units are assembled by knock down fittings such as Minifix &

Dowels.( ± 5% Varaition allowed)

B.O.Q OF LEVEL II FURNITURE FOR VANIJYA BHAWAN ANNEXURE-II

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

Supplying of Additional and joint secretary chairs in leatherette with headrest

Seat, and backrest made of CFC freepolyurethane foam upholstered with 100%

leatherette MECHANISM:-Headrest should Mount to the back for total body support in the

reclined or upright posture. with adjustment range: 4.2" (107mm). Synchronized forward

tilt – Adjusts 5° degrees downward from initial position to support an upright, forward

posture. Seat height adjustment with Pneumatic gas lift adjusting 16-21". Seat Depth

adjustment upto 3 inches. Tilt-tension control that regulates the amount of resistance of

seat back. Should allow the back to Lock in an upright position. Back reclines 20° from the

upright position with seat pan moves downward 3 to 5° from the initial position.

Asymmetrical Right/Left lumbar support adjusts up and down to the curvature of the back

and allows independent in and out adjustment on each side. • Adjustment Range: 4"

(102mm) 4D arms allow fluid adjustment in four directions: • Height adjustment range: 4"

(102mm) to 5 " • Side-to-side arm cap adjustment range:3" (76mm); 1.5" (38mm) per arm

cap • Front-to-back adjustment range: 3.5" (89mm) to 5 " • Pivoting arm caps: 20 - 30° in

and 20 - 30° out

Hard casters for carpeted floors(black or two-tone grey) or Soft casters for hard floors

(black) DIMENSIONS : 27" ( W) x 39-44" (H) x 26" mm (D), ± 5% Headrest: 11.25"W x

7.0"H BASE:-Five star base of polished die cast aluminium with hard or soft castors. The

chair should adhere to GREENGUARD® Gold certified & BIFMA level 3® certified

WARRANTY: 10 years The Product should be complete as per the approved sample and

as per the direction of engineer incharge. ( ± 5% Varaition allowed)

Providing and placing in position premium wooden meeting table chair made with teak

wood frame work in seat and back with cane or similar material. the seat should have

50mm thick HDU foam of “approved” make duel upholstered with fabric of approved

shade including melamine polishing. The size of back 500mm x450mm and size of seat

500mm x480mm all complete as per approved sample and as per direction of Engineer-in-

Providing and placing console of size 1200 x 450mm and height 1200mm ith

sliding/openable storage. Finishes and Material: The storage unit is made from 18mm

prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &

sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged

shutters are sealed with 2mm thick PVC edge banding.Side Storage is a combination of

open shelves and hinged door unit and is made of 18mm thick pre laminated partical

Board. . The back of the unit is made from 18mm prelaminated board. All the exposed

edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick

PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick

PVC edge banding. Back The units are assembled by knock down fittings such as Minifix

& Dowels. Warranty 5 years( ± 5% Varaition allowed)

Providind and Supplying round table of size 1000 mm dia and 760-780mm high . The

Worktop shall be made of 25mm particle board pasted with veneer with side mouldings in

57 hard wood ,8mm toughened glass on top of table complete in all respect as per 39 N0. 18,592.08 7,25,091.12

specification and direction of Engineer-in-charge (Premium category Veneer base price

Providing and fixing 2100 wide 600 mm deep x 2400 ht box type wooden cupboard made

out of 19 mm solid block board with commercial ply veneering in both sides for the

shelves, drawers and boxing and for the shutters with teak wood margin on all exposed

edges of the board with necessary piano hinges one side of shutters made of 12mm ply +

58 9 mm thick ply with 3.5 mm thick and 12mm glass in between. Premium category veneer 39 N0. 73,891.60 28,81,772.40

on exposed surface and rest of the faces shall be of 1mm laminate with necessary

adhesive etc ,finishing with melamine polish (matt finish) on all veneered surfaces

etc.complete as per design and drawings, and Photographs and direction of the Engineer

Providing and placing in position decorative 3 seater Sofa frame shall be made up of hard

wood and chrome legs. The cushioned seat and back should be upholstered with high

quality fabric. The foam shall be made of polyurethane having density of 40- 45 kg/cubic

meter. The rate of high quality Leather used shall be approx Rs. 800/ mt.etc complete as

per the approved sample. Complete and as per apprroved sample and as per the direction

of Engineer-In-charge.(FOR ADD. SECRETARY/ JOINT SECRETARY)

Providing and placing in position decorative 1 seater Sofa frame shall be made up of hard

wood and chrome legs. The cushioned seat and back should be upholstered with high

quality fabric. The foam shall be made of polyurethane having density of 40- 45 kg/cubic

meter. The rate of high quality Leather used shall be approx Rs. 800/ mt.etc complete as

per the approved sample. Complete and as per apprroved sample and as per the direction

of Engineer-In-charge.(FOR ADD. SECRETARY/ JOINT SECRETARY)

D EXECUTIVE DINNING 0.00

B.O.Q OF LEVEL II FURNITURE FOR VANIJYA BHAWAN ANNEXURE-II

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

Supplying & placing 3 seater high back sofa. Dimensions as mentioned under.

The seat is made of multilayer PU foam with density 60± 2 kg/cu in first layer,35± 2 kg/cu

in second layer and 80± 2 kg/cu in third layer. Seat is upholstered with fabric . The back is

made of PU foam with density 60± 2 kg/cu in first layer,35± 2 kg/cu in second layer and

61 80± 2 kg/cu in third layer upholstered with fabric. Sofa frame is made of Solid Pine and 10 N0. 57,206.40 5,72,064.00

Plywood interior frame and non deformable polyurethane foam covered in polyester

padding . Understructure is steel epoxy powder coated understructure DIMENSIONS : 67"

W x 33.3" D x 49.6" H Seating Height: 420mm Product should be BIFMA and Greenguard

/ scs indoor air quality certified. Warranty 5 years ( ± 5% Varaition allowed)

Supplying & placing 1800 X 900 X750 mm TABLE with following specifications

E1 grade 25mm thick LPL/MelamineRectangle worktop with 2mm ABS edge binding; with

soft closing flip-top cutout starts from edge. The LPL is complied with GB/T 15102-2006. It

covers major LPL performance such as scratch resistance, wear resistance, stain

resistance with inclusion of Formaldehyde test under GB/T 18580 meeting E1 standards.

Size as mentioned in next slides

30x50 Steel frame end legs with simple accent plate. Steel A leg with leveling composes

62 of leg, base, glide, accent plate and end bracket. Steel A legwith leveling applies epoxy 6 N0. 15,195.45 91,172.70

finished. Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll

forming with average thickness 2mm, and cross beam made of steel tube with thickness

3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base

applies with M8 metal inserter. Glide made of plastic injection with Nylon 30% fiber glass.

Accent plate made of 1.6mm SPCC steel with epoxy finished. Base, glide, simple accent

plate and end bracket deliver together with Steel A leg. Product should be BIFMA and

Greenguard / scs indoor air quality certified. Warranty 10 Years( ± 5% Varaition allowed)

Supplying of lounge chairs with back and arms: Upholstered in matching upholstery..Seat:

Standard upholstered. Upholstery to complement back and arms.. Base: : Wooden dowel

63 legs with painted aluminum hub and with glides; felt pads. Seat swivels 18 N0. 14,718.73 2,64,937.14

360°.DIMENSIONS : SH: 18″(457mm)

AH: 25″(635mm) The chair should be Greenguard / sgs indoor air quality and ANSI/BIFMA

certified. WARRANTY: 5 years against any manufacturing defect( ± 5% Varaition allowed)

PRIVATE SECRETARY ,OSD,ADD. P.A ,P.A TO SECRETARY ,ADD. SECRETARY/

JOINT SECRETARY)

Providing and fixing of table for office of following specifications and size

Worktop with Main Table: 2400x900mmx750mm with Left/Right Handness Return storage

of Size: 1200mmx450mm with Complete wire Management and Pedestal Units , Back

Storages with Sliding/openable Mechanism and Size of 2400(L)x 600(D)x750(H)mm

Length. Finishes and Material: 25 mm thick Pre Laminated Particle Board with matching 2

mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish or acrlic

finish. Table supports are Prelaminated finish. Access Flap with Cable tray and switch

mounting plate is provided on Main table for wire management. The storage unit is made

from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported

64 banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side 2 No. 1,03,868.95 2,07,737.89

and hinged shutters are sealed with 2mm thick PVC edge banding.Side Storage is a

combination of open shelves and hinged door unit and is made of 18mm thick pre

laminated partical Board. . The back of the unit is made from 18mm prelaminated board.

All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with

0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed

with 2mm thick PVC edge banding. Back The units are assembled by knock down fittings

such as Minifix & Dowels. Warranty 5 years( ± 5% Varaition allowed)

Providing and fixing of table for office of following specifications and size

Worktop with Main Table: 2400x900mmx750mm with Left/Right Handness Return storage

of Size: 1200mmx450mm with Complete wire Management and Pedestal Units , Back

Storages with Sliding/openable Mechanism and Size of 2400(L)x 600(D)x750(H)mm

Length. Finishes and Material: 25 mm thick Pre Laminated Particle Board with matching 2

mm thick edge Banding. Modesty panels are in 18mm thk Prelaminated finish or acrlic

finish. Table supports are Prelaminated finish. Access Flap with Cable tray and switch

mounting plate is provided on Main table for wire management. The storage unit is made

from 18mm prelaminated board. All the exposed edges are with 2mm PVC egde Imported

65 banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side 7 No. 83,864.58 5,87,052.08

and hinged shutters are sealed with 2mm thick PVC edge banding.Side Storage is a

combination of open shelves and hinged door unit and is made of 18mm thick pre

laminated partical Board. . The back of the unit is made from 18mm prelaminated board.

All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with

0.8mm thick PVC Imported edge banding. The top, side and hinged shutters are sealed

with 2mm thick PVC edge banding. Back The units are assembled by knock down fittings

such as Minifix & Dowels. Warranty 5 years( ± 5% Varaition allowed)

65.1 Same as above in 2100 mm with additiona table 1 No. 79,552.65 79,552.65

65.2 Same as above in 1500 mm without additiona table 20 No. 54,388.98 10,87,779.70

65.3 Same as above in 1500 mm without back unit,and additiona table 50 No. 43,066.88 21,53,344.24

66 Executive Chair 0.00

Supplying of task chairs in mesh back and fabric seat with headrest

Fabric Seat made of CFC freepolyurethane foam upholstered and mesh backrest.

MECHANISM:- Back: Soft mesh back,Lumbar: Height adjustable lumbar of 76mm Seat:

Standard upholstered with foam Seat depth: Standard 50mm seat depth adjustment

Arms:4D Arms ·Mechanism: Weight Activated mechanism ·Back lock: Standard one lock

position at upright angle. Tilt tension: Standard tilt tension. Seat height adjustment:

Pneumatic seat height adjustment of 127mm

Casters: Standard with hard casters; optional soft casters. DIMENSIONS without headrest:

27" ( W) x 43.2" (H) x 26" mm (D), ± 5%. BASE:- Five star base of black nylon base with

castors The chair should adhere to GREENGUARD & BIFMA certified. WARRANTY: 10

years The Product should be complete as per the approved sample and as per the

direction of engineer incharge.( ± 5% Varaition allowed)

67 Visitors Chair 0.00

B.O.Q OF LEVEL II FURNITURE FOR VANIJYA BHAWAN ANNEXURE-II

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS REFERENCE IMAGE AND LOCATION UNIT RATE TOTAL AMOUNT

Supplying of task chairs in mesh back and fabric seat

Fabric Seat made of CFC freepolyurethane foam upholstered and mesh backrest

MECHANISM:- Back: Soft mesh back. Lumbar: Height adjustable lumbar of 76mm Seat:

Standard upholstered with foam.Seat depth: Standard 50mm seat depth adjustment.

Arms:4D Arms ·Mechanism: Weight Activated mechanism ·Back lock: Standard one lock

position at upright angle. Tilt tension: Standard tilt tension. Seat height adjustment:

Pneumatic seat height adjustment of 127mm

Casters: Standard with hard casters; optional soft casters. DIMENSIONS without headrest:

27" ( W) x 43.2" (H) x 26" mm (D), ± 5%. BASE:- Five star base of black nylon base with

castors. The chair should adhere to GREENGUARD & BIFMA certified WARRANTY: 10

years The Product should be complete as per the approved sample and as per the

direction of engineer incharge.( ± 5% Varaition allowed)

Supplying of chief manager Visitor chairs in mesh back and fabric seat 'Back: Soft mesh.

Seat: Standard upholstered foam . Base: Plastic Nylon Base with hard or soft casters.

Arms: height adjustable arms . Mechanism: Synchro Tilt mechanism . Height adjustment:

67.2 Pneumatic seat height adjustment 138 N0. 9,236.45 12,74,630.10

Adjustable Lumbar Support . Back Lock at standard upright position

Color or mesh and structure : black only . color of fabric : options available

5 years warranty . BIFMA Certified.( ± 5% Varaition allowed)

Providing and placing console of size 1200 x 450mm and height 1200mm ith

sliding/openable storage. Finishes and Material: The storage unit is made from 18mm

prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &

sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged

shutters are sealed with 2mm thick PVC edge banding.Side Storage is a combination of

open shelves and hinged door unit and is made of 18mm thick pre laminated partical

Board. . The back of the unit is made from 18mm prelaminated board. All the exposed

edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick

PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick

PVC edge banding. Back The units are assembled by knock down fittings such as Minifix

& Dowels.Warranty 5 years ( ± 5% Varaition allowed)

F DIRECTORS/ U.S/D.S/ STAFF 0.00

Providing and fixing of table for office of following specifications and size

Natural Veneer Finishes Worktop with Main Table: 2300x900mmx750mm with Complete

wire Management and Pedestal Units , Back Storages with Sliding/openable Mechanism

and Size of 2300(L)x 1000m(D)x750(H)mm Length. Finishes and Material: Made from

Veneer tops MDF panels total thickness: 35-40 mm, density 740kg/m`, covered in real

wood veneer 0.5- 0.6 mmwith an engineered composite panel with a minimum 90% wood

fiber content, at least 10% post consumer, and 80% pre-consumer wood fiber-bondedwith

resin. Table top joined to front and side panels through polshed metal studs. The

composite panel is 3rd party certified compliant with Air Resource Board requirements for

68 Phase 2 formaldehyde emission levels, and includes wood fiber sourced from FSC 0.00

certified forests, using the 70% FSC Mix Credit System.Worksurfaces, including Desks

,Common Modular Tops and Modular Credenza Worksurfaces are 1 3/16” (30mm) thick

and are made of woodcomposite core. Surface finishes : (Premium category Veneer base

price 200 Rs/ Sqft)

68.3 Laminate Pedestal Unit 86 N0. 8,580.96 7,37,962.56

Providing and fixing High Back Mesh Chair with Headrest. SPECIFICATIONS: Back

Height - High Back w/Headrest,Back Finish - Mesh with Lumbar Support,Back Mesh Color -

Black,Seat Finish - Fabric,Seat Fabric Color - Black,Seat Height Adjustment -

Pneumatic,Mechanism Type - Synchronized Tilt,Back Tilt Lock - Upright Position

Back Tilt Tension - Adjustable,Armrests Type - Fixed arms,Base Type - 5-Star in Black

nylon base,WARRANTY: 5 Years from the date of invoice

Providing and placing in position premium wooden meeting table chair made with teak

wood frame work in seat and back with cane or similar material. the seat should have

70 50mm thick HDU foam of approved make duel upholstered with fabric of approved shade 258 N0. 12,473.38 32,18,131.73

including melamine polishing. The size of back 500mm x450mm and size of seat 500mm

x480mm all complete as per approved sample and as per direction of Engineer-in-charge.

Providing and placing console of size 1200 x 450mm and height 1200mm ith

sliding/openable storage. Finishes and Material: The storage unit is made from 18mm

prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding &

sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged

shutters are sealed with 2mm thick PVC edge banding.Side Storage is a combination of

open shelves and hinged door unit and is made of 18mm thick pre laminated partical

Board. . The back of the unit is made from 18mm prelaminated board. All the exposed

edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick

PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick

PVC edge banding. Back The units are assembled by knock down fittings such as Minifix

& Dowels.Warranty 5 years ( ± 5% Varaition allowed)

Total amount for Level II furniture 555,39,431.72

Total amount for Level II furniture 555,39,431.72

B.O.Q OF LEVEL III FURNITURE FOR VANIJYA BHAWAN

S.No. DESCRIPTION OF ITEMS LOCATION REFERENCE IMAGE UNIT RATE TOTAL AMOUNT

S.No. DESCRIPTION OF ITEMS LOCATION REFERENCE IMAGE UNIT RATE TOTAL AMOUNT

G U.S/D.S/ STAFF

Providing and placing, Main Table is completely made up of Postform Curvica particle board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk boards with post formed Edge on User and Visitor Side . Table top is

supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding &

sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables

shall be made by customer as the tables do not come with switch mounting facility.Side table is with Postformed Curvica Top

on User side and rest completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge UNDER

banding. Top is supported on 18mm thk. Gable ends and 18mm thk. Modesty panel. Exposed edges are in 2mm thk PVC SECRETARY

edge banding & sealed edges are in 0.8mm thk PVC edge banding. It has CPU storage space. . Pedestal unit of size

400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3

Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit. Back Unit is

hinged door unit and is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are

provided in storages. ( ± 5% Varaition allowed)

72.3 Laminate Pedestal Unit 151 N0. 7,329.57 11,06,765.07

Corner Table :-W500xD500xH400mm Providing & Fixing of Table made of 18mm thick prelaminated particle board .The top

is 10mm thick Glass supported on 4 nos. SS Studs with verticals also made of 18mm Particle board.The table has a shelf ALL CABINS &

under the main top. All edges are sealed with 2 mm thick PVC Lipping. The above furniture should be as per specification and RECEPTION

sample approved by client.( ± 5% Varaition allowed)

Centre Table :-W1200xD600xH400mm Providing & Fixing of Table made of 18mm thick prelaminated particle board .The top

is 10mm thick Glass supported on 4 nos. SS Studs with verticals also made of 18mm Particle board.The table has a shelf ALL CABINS &

under the main top. All edges are sealed with 2 mm thick PVC Lipping. The above furniture should be as per specification and RECEPTION

sample approved by client.( ± 5% Varaition allowed)

Overhead Storage :-W900xD450xH600 Providing and placing Prelaminated Particle Board storage with openable doors ,

made up of 18mm thick prelaminated particle board with PVC edge banding and locking arrangement.Storage body is made

of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit is made from 18mm

75 prelaminated board. All the exposed edges are with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick 478 No. 7,722.86 36,91,528.99

PVC Imported edge banding. The top, side and hinged shutters are sealed with 2mm thick PVC edge banding. The units are

assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Hettich/Ebco. Storage has

Brushed SS finish handles and lock . Prelam storage unit 450mm depth ( ± 5% Varaition allowed)

Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 1200 mm (H) x 450 mm (D) and shall be made of

prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel..

Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical

sides of storages from inside have contineous slots for mounting variable height shelves. microns It is Hinged Door Unit.Facia OPEN OFFICE&

: The cabinet shutters are made of Metal.Handles : Handle Shall be aesthetically designed Recessed Handles in Plastic CABINS

Moulding.Locking Mechanism: Locking Mechanism shall be Cam lock in Metal Door.Levellor: It also have adjustable Leveler

with plastic base with height adjustment up to 15mm.The above furniture should be as per specification and sample approved

by client.( ± 5% Varaition allowed)

Providing & Supplying Cabinet . It shall have dimensions 1800 mm (W) x 500 mm (H) x 450 mm (D) and shall be made of

prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel..

Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical

sides of storages from inside have contineous slots for mounting variable height shelves. microns It is Hinged Door Unit.Facia OPEN OFFICE&

: The cabinet shutters are made of Metal.Handles : Handle Shall be aesthetically designed Recessed Handles in Plastic CABINS

Moulding.Locking Mechanism: Locking Mechanism shall be Cam lock in Metal Door.Levellor: It also have adjustable Leveler

with plastic base with height adjustment up to 15mm.he seat and back are made of foam and is finished in fabric upholestry.(

± 5% Varaition allowed)

Providing & Supplying Cabinet . It shall have dimensions 900mm (W) x 2100 mm (H) x 450 mm (D) and shall be made of

prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel..

Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical

sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with OPEN OFFICE&

Epoxy polyester powder coating finish 50 +/-10 microns It is Hinged Door Unit. Facia : The cabinet shutters are made of Metal CABINS

.Handles : Handle Shall be aesthetically designed Recessed Handles in Plastic Moulding.Locking Mechanism: Locking

Mechanism shall be Cam lock in Metal Door.Levellor: It also have adjustable Leveler with plastic base with height adjustment

up to 15mm.The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing & Supplying Cabinet . It shall have dimensions 600mm (W) x 2100 mm (H) x 450 mm (D) and shall be made of

prime Quality CRCA 0.8mm thk for all the body panels and shelves having top & bottom stiffeners in 0.8mm CRCA steel..

Shelves are adjustable in variable heights and shall have Uniformly Distributed Load capacity of 50 Kg per shelf . The vertical

sides of storages from inside have contineous slots for mounting variable height shelves. Complete carcass is finished with OPEN OFFICE&

Epoxy polyester powder coating finish 50 +/-10 microns It is Hinged Door Unit. Facia : The cabinet shutters are made of Metal CABINS

.Handles : Handle Shall be aesthetically designed Recessed Handles in Plastic Moulding.Locking Mechanism: Locking

Mechanism shall be Cam lock in Metal Door.Levellor: It also have adjustable Leveler with plastic base with height adjustment

up to 15mm.The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing and placing Linear Workstation with pedestal unit . Partition is 50 mm thick and made of Aluminium Extrusions of

1.2 mm to 1.5mm thickness. The System is complete hollow system with space for wire reticulation . All the frames will be duly

powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10

leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of

0.8mm - 1mm thick CRCA steel & powder coated. The electrical raceway can be provided below worktop or above

worktop.The partition has two integrated raceway provided one at skirting level and another at the work surface level thus

ensuring separation of power and networking cables. The free space available within raceway accommodates power, data

and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile:

Constructed out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made

out of 5mm - 8mm thick Pre-laminated Medium Density Fiber Board (MDF)Bottom Row of Steel Tile: Constructed out of

79 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed OPEN OFFICE 0.00

finishes.Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker

tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm. Table tops and

Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have

Metal Insets for fixing screws. Specially designed powder coated M.S. brackets having 2mm thickness fixed to the partition

frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front

side. Gable Ends are fixed with 3mm thick MS brackets to Frame and with 3mm thick Brackets to Worktops. Sealed edge in

table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non

working side. Each Workstation has 3Drawer laminate Pedestal unit of size 400mm L x 450mm D x 680mm made up of

18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide

mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit .( ± 5% Varaition allowed)

Providing and placing Workstation 1500 L x 1500 W x 1200mm Ht with pedestal unit, Frame is 50 mm thick and made of

Aluminium Extrusions of 1.2 mm to 1.5mm thickness. The System is complete hollow system with space for wire reticulation .

All the frames will be duly powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the

frames are fitted with M10 leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside

frame and are made out of 0.8mm - 1mm thick CRCA steel & powder coated. The electrical raceway can be provided below

worktop or above worktop.The partition has two integrated raceway provided one at skirting level and another at the work

surface level thus ensuring separation of power and networking cables. The free space available within raceway

accommodates power, data and communication cables. The cable can be taken into the Frame from the floor from the

bottom. Tiles: Fabric Tile: Constructed out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of

choice. Laminate Tile: Made out of 5mm - 8mm thick Pre-laminated Medium Density Fiber Board (MDF)Bottom Row of Steel

80 Tile: Constructed out of 0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / OPEN OFFICE 165 No. 38,268.70 63,14,335.17

embossed finishes.Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard

marker tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm.Table tops

and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All Worktops to have

Metal Insets for fixing screws. Specially designed powder coated M.S. brackets having 2mm thickness fixed to the partition

frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge banding on front

side. Gable Ends are fixed with 3mm thick MS brackets to Frame and with 3mm thick Brackets to Worktops. Sealed edge in

table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge banding on non

working side. Each Workstation has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up of 18mm thk.

Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism

for 2 Drawers and Ball bearing slide for 1 Filng Unit

Providing and placing, Main Table is completely made up of Postform Curvica particle board conforming to IS : 12823 Interior

Grade with PVC edge banding. Top are with 25mm thk boards with post formed Edge on User and Visitor Side . Table top is

supported on 18mm thick Gable ends and 18mm thk Modesty panels. exposed edges are in 2mm thk PVC edge banding &

sealed edges are in 0.8mm thk PVC edge banding. Separate provision for mounting switches on the wall adjoining the tables

shall be made by customer as the tables do not come with switch mounting facility.Side table is with Postformed Curvica Top

on User side and rest completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge

81 DIRECTOR 0.00

banding. Top is supported on 18mm thk. Gable ends and 18mm thk. Modesty panel. Exposed edges are in 2mm thk PVC

edge banding & sealed edges are in 0.8mm thk PVC edge banding. It has CPU storage space. . Pedestal unit of size

400mm L x 450mm D x 680mm made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3

Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit. Back Unit is

hinged door unit and is made of Prelaminated particle Board 18mm thick with Matching PVC lipping. SS handles 220mm L are

provided in storages. ( ± 5% Varaition allowed)

81.3 Laminate Pedestal Unit 83 No. 7,329.57 6,08,354.31

U.S/D.D Cubicle Partitions : 1200mm Height, Partition is 50-60 mm thick and made of Aluminium Extrusions of 1.2 mm to

1.5mm thickness. The System is complete hollow system with space for wire reticulation . All the frames will be duly powder

coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10 leveling

bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of 0.8mm -

1mm thick CRCA steel & powder coated. The electrical raceway can be provided below worktop or above worktop.The

partition has two integrated raceway provided one at skirting level and another at the work surface level thus ensuring

separation of power and networking cables. The free space available within raceway accommodates power, data and

communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile: Constructed

out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made out of 5mm -

8mm thick Pre-laminated Medium Density Fiber Board (MDF)Bottom Row of Steel Tile: Constructed out of 0.8mm CRCA

sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed finishes.Magnetic tile:

Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker tiles: Made out of 4mm

MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm. . Free end of the partition is provided with

stability brackets grouted to the floors .

Providing and fixing High Back Mesh Chair with Headrest. SPECIFICATIONS: Back Height - High Back w/Headrest,Back

Finish - Mesh with Lumbar Support,Back Mesh Color - Black,Seat Finish - Fabric,Seat Fabric Color - Black,Seat Height

83 Adjustment - Pneumatic,Mechanism Type - Synchronized Tilt,Back Tilt Lock - Upright Position,Back Tilt Tension - 234 No. 9,522.48 22,28,260.79

Adjustable,Armrests Type - Fixed arms,Base Type - 5-Star in Black nylon base,WARRANTY: 5 Years from the date of invoice

( ± 5% Varaition allowed)

Providing and fixing Medium Back Mesh Chair with Lumber Support, Seat Size 510mm W x 510mm D, Back Size 480m W x

520mm Ht . The chair comes with PP arms , Nylon base with 50mm castors . The chair has Push Back Mechanism .The

84 chair comes with Pneumatic Gas Lift of Stroke=95 mm . Seat Height Minimum 480mm from Ground and Maximum 570mm. 1646 No. 9,284.12 152,81,664.81

Overall size of the chair is 620 mm W x 680 mm D x (950 mm- 1050mm) H .The Chair Warranty : 3 Years.( ± 5% Varaition

Providing and fixing Round table 900 Dia x 750 with top made of 25mm prelaminated particle board and CRCA Powder

coated base ,The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing & Fixing of sofa . the inside frame is made of seasoned wood and has antitermite treatment. The seat and back are

made of foam and is finished in fox leather upholestry. The structure is supported on Polished Solid Wood Legs. Leatherite

colour and type as per directions of Engineer in Charge. The above furniture should be as per specification and sample

approved by client.( ± 5% Varaition allowed)

Providing and supplying ReceptionDesk having Dimension 1800mm L x 600mm x 1185mm Height . It has 25mm thick

Worktop and Gable Ends made of pre Laminated Particle Board sealed with PVC Edge Banding. Front and Modesty Panel

are 18mm thick Pre Laminated ParticleBoard Sealed with PVC EdgeBanding.. The Counter Top is 25 mm Thick Postformed

ParticleBoard. Unit has One Pull out drawer with Lock and Handle.( ± 5% Varaition allowed)

Providing and supplying ReceptionDesk having Dimension 2400mm L x 600mm x 1185mm Height . It has 25mm thick

Worktop and Gable Ends made of pre Laminated Particle Board sealed with PVC Edge Banding. Front and Modesty Panel

are 18mm thick Pre Laminated ParticleBoard Sealed with PVC EdgeBanding.. The Counter Top is 25 mm Thick Postformed

ParticleBoard. Unit has One Pull out drawer with Lock and Handle.( ± 5% Varaition allowed)

Providing and supplying ReceptionDesk having Dimension 3500mm L x 600mm x 1185mm Height . It has 25mm thick

Worktop and Gable Ends made of pre Laminated Particle Board sealed with PVC Edge Banding. Front and Modesty Panel

are 18mm thick Pre Laminated ParticleBoard Sealed with PVC EdgeBanding.. The Counter Top is 25 mm Thick Postformed

ParticleBoard. Unit has One Pull out drawer with Lock and Handle.( ± 5% Varaition allowed)

Providing & Supplying Rack of size 900mm L x 310mm D x 1890mm Ht. The top Panel is Made of CRCA Sheet and side

panel is made up of 18mm thick pre laminated particle board of interior grade with laminate on both sides of approved make

and shade. The working and non – working edges shall be provided with machine pressed 2mm thick PVC edging using

90 special hot melt glue at high temperature. the back panel is made up of CRCA Metal Sheet Duly Powder Coated. Brackets LIBRARY 38 No. 15,612.58 5,93,278.04

holding the shelf are made up of 2mm thick CRCA. Metal shelfs are made up of 0.8mm thick CRCA powder coated finish as

per the directions of Engineer in Charge. The above furniture should be as per specification and sample approved by client.(

± 5% Varaition allowed)

Providind and Supplying round table of size 1800mm dia . The Worktop shall be made of 25mm Prelamparticle Board of

Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC

91 lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel 8 No. 8,163.83 65,310.64

and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness . The above furniture should

be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing & Fixing meeting table of Size. the Worktop shall be made of 25mm Prelamparticle Board of Grade II , Type-II as

per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine

pressed. Legs are made of Aluminum Extrusion of 1.6mm thickness with aesthically designed elliptical Cover sections . Legs

are designed to facilitate wire management . Cross Member are in CRCA steel and the Beam is made of MS and has size

75x50 mm of 1.5mm thickness in powder coated finish of 50 microns thickness and is connected with legs to allow for

traversing of wires horizontally. The beam raceway provided with slots for fixing data and electrical switches and sockets for

each user under the table. The above furniture should be as per specification and sample approved by client.( ± 5% Varaition

Providing & Supplying High table with Main Table Dimension 1800mm L x 600 mm D x 1200mm H . The Worktop is made of

25mm thick Prelaminated particle board with 2 mm thick PVC Lipping on the edges. The worktop is supported on U Shape

93 Metal Legs 50mm x 50mm , powder coated understructure . The Metal legs are connected by Metal Beams for stability and . 21 No. 14,325.44 3,00,834.16

The tables have metal inserts on underside for modularity. Colour as per direction of Engineer in Charge. ( ± 5% Varaition

Providind and Supplying round table of size 1000mm dia . The Worktop shall be made of 25mm Prelamparticle Board of

Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC

lipping machine pressed. Understructure is made of 18mm Prelaminated Particle Board and fixing is through Minifix / Dowels.

The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing & Fixing of Cafe table of Size 1800mm x 900mm. The Worktop shall be made of 25mm Prelamparticle Board of

Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC

95 lipping machine pressed. Legs are inclined in shape and made of powdered coated steel 50mmx 50mm Section. Cross 29 No. 17,209.59 4,99,078.17

Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness .

The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing and Supplying Sofa chair. The seat is made of Hot pressed moulded 12mm thick wooden ply upholstered with foam

96 leatherite tapestry. Back is also finished in Foam with Leatherite upholestry. The understructure is made of Metal Steel Pipes 333 No. 10,904.97 36,31,355.01

with Chrome Plating. Seat size- 45 cm (W) x 45cm (D) Back overall height from floor - 75Cm( ± 5% Varaition allowed)

Providing & Fixing of serving table of Size 1800mm x 600mm. The Worktop shall be made of 25mm Prelamparticle Board of

Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC

97 lipping machine pressed. Legs are inclined in shape and made of powdered coated steel 50mmx 50mm Section. Cross 11 No. 14,325.44 1,57,579.80

Member are in CRCA steel and the Beam is made of MSof 1.5mm thickness in powder coated finish of 50 microns thickness .

The above furniture should be as per specification and sample approved by client.( ± 5% Varaition allowed)

Providing and supplying High Stool / Chair for high counters. The stool has Wooden Coloured base with foot support . It has

98 plastic seat shell with Cushioned Seat wrapped in Leatherite / Fabric . Seat dimensions are 380 - 420 mm W x 365 - 400 mm 41 No. 5,601.46 2,29,659.86

D , Back dimensions are 245 - 350 mm Ht - 350 . 420 mm W .( ± 5% Varaition allowed)

Providing and fixing teller counter of size 1500mm (W) x 1800 (D) x 1500 (H) made of 75mm Thick Frame based System.

The Frame is in Aluninium withTops Caps and Vertical Trims in Aluminium - all Duly powder coated. The Frames have

Laminate / Fabric/ Pinup / Marker or Toughned Glass Tiles . These tiles are sliding tiles and frames are hollow for Wire

Reticulation. The Frant has Glass Screen from Above Table top till 1500mm Height from Floor Level with Suitable Space for

Transaction above table topas per the Engineer inCharge. Frame is 75 mm thick and made of Aluminium Extrusions of 1.2

mm to 1.5mm thickness. The System is complete hollow system with space for wire reticulation . All the frames will be duly

powder coated . All the frames are fastened together by means of M6 NUTS & BOLTS . All the frames are fitted with M10

leveling bolts.board.Raceway :-The raceway cover are sliding type and are integrally fitting inside frame and are made out of

0.8mm - 1mm thick CRCA steel & powder coated. The electrical raceway can be provided below worktop or above

99 OFFICE 0.00

worktop.The partition has two integrated raceway provided one at skirting level and another at the work surface level thus

ensuring separation of power and networking cables. The free space available within raceway accommodates power, data

and communication cables. The cable can be taken into the Frame from the floor from the bottom. Tiles: Fabric Tile:

Constructed out of 5mm thick Medium Density Fiber Board (MDF) and covered with Fabric of choice. Laminate Tile: Made

out of 5mm - 8mm thick Pre-laminated Medium Density Fiber Board (MDF).Bottom Row of Steel Tile: Constructed out of

0.8mm CRCA sheet and finished in epoxy powder coating. Can be given with plain / perforations / embossed

finishes.Magnetic tile: Constructed out of 0.8mm Galvanized sheet and covered with fabric of choice. Whiteboard marker

tiles: Made out of 4mm MDF with 1mm glossy highly wear resistant face laminate . Total thickness is 5mm. ( ± 5% Varaition

Table tops and Gable ends are of 25mm thk Pre-laminated particleboards conforming to IS : 12823 Interior Grade. All

Worktops to have Metal Insets for fixing screws. Specially designed powder coated M.S. brackets having 2mm thickness

fixed to the partition frame support the tabletops. Gable ends are of 25mm thk. both side laminate (BSL) with 2mm PVC edge

banding on front side. Gable Ends are fixed with 3mm thick MS brackets to Frame and with 3mm thick Brackets to Worktops.

Sealed edge in table top and gable ends are with2mm thick PVC edge banding on Working side and 0.8mm thick edge

banding on non working side. Each Workstation has 3Drawer Pedestal unit of size 400mm L x 450mm D x 680mm made up

of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade with 3 Drawer ( 2 Drawer + 1 Filing ) with roller

slide mechanism for 2 Drawers and Ball bearing slide for 1 Filng Unit ( ± 5% Varaition allowed)

Providing & Supplying Compactor of approximately 2150mm height (Ht).The overall height of the standard module is 2150

mm from the bottom of the under carriage to the top of the module. These modules are fabricated in the factory with knock

down construction covered from all the sides. The sheet used is CRCA conforming to IS:513 Grade D with thickness 0.8-

1mm for the vertical back, side walls, top cover and horizontal shelves of bodies. Bodies are fixed/movable are bolted to

undercarriage made up of 2-3mm thk HR Steel sheet which rolls onto channels/rail of 1.2-2mm thk HR steel & 25mm square

100 bright bar which are embedded to the levelled ground. The Body has 3 Shelves. The sides/shelves shall be made from steel 0.00

sheets conforming to relevant codes. The construction of the units shall be such that protection against dust by suitable

overlapping of sheets and adequate pressing of joint. The allowable dimensional tolerance for the overall size of the body is

2mm. The bodies should be complete knock down type and UDL each shelf should be 40kg . No welding/metal working is

allowed on site, Bodies are fixed/movable are bolted to undercarriage is allowed on site.( ± 5% Varaition allowed)

100.1 3 Bay Single side fixed -2150mm Ht x 2745mm W x 400mm D 6 No. 72,044.31 4,32,265.86

100.2 3 Bay Single side mobile -2150mm Ht x 2745mm W x 450mm D 6 No. 76,692.33 4,60,153.98

100.3 3 Bay Double side mobile -2150mm Ht x 2745mm W x 915mm D 18 No. 1,39,440.60 25,09,930.80

101 Roller Blind with Cassette & Guide rail 0.00

Providing and fixing of Roller Blind with decorative Cassette & Guide rail with thick brush to avoide unnecessary movement

of blinds. Blind should have sturdy aluminium top tube of 38mm diameter, powder coated bottom bar. The Roller Blind fabric

should possess the below mentioned specifications: Composition –35%-40% core yarn coated with 60%-65% vinyl. Core

yarn should be Fiberglass. Fabric thickness – 0.50-0.55 mm & Weight - 470 g/m2 (± 5%). UV blockage – 97% (approx.)– MIF

seal of approval . Leadfree certified – RoHS compliant. Flame Retardant – NFPA 701 and California US title 19. Anti-fungal /

Anti-bacterial for lifetime – MICROBAN®product protection. Environmental certification – GREENGUARD Gold certified.

Warranty – 10 years for interior & Warranty certificate for fabric direct from the fabric manufacturer need to be submitted by

the contractor. Acoustical Value - NRC 0.20 / SAA 0.21. Aluminium profile should have temper WP consisting of alloy 63400

along with anodizing of 10 micron and powder coating of 60 micron. The tensile strenghth of profile should be 9.10 Kg/mm

square and elongation 18.Brackets finish of powder coated metal installation brackets made of stamped and hardened steel.

Roller tube circular-shaped aluminium channel extruded from alloy 63400 and temper WP. Bottom rail flat-shaped extruded

aluminium from alloy 63400 and temper WP.

101.2 Tubular Motor & Remote 0.00

Motor 34.75mm - 6NM & 28 RPM (Radio Motor), these motor can only operate on remote. 230 V, 50 HZ, Lifting capacity

15kg, RPM - 28, maximum turn 28 Multi channel remote (5 channel)

Total amount for Level III furniture 1267,78,239.86

Total amount for Level III furniture 1267,78,239.86