Protection of Amingaon area from the erosion of river Brahmaputra RETENDER

Amount

Clearing grass and removal of rubbish up to a distance of 30 m outside the periphery of the area as per Technical Specification Clause 201. (i) By Manual Means

Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Supply of Geo Bags of Type-B (Size 2.00m x 1.50m) inner dimention made of composite layers of geo-textile as per specifications below :Woven Geo-textile for the outer cover. The woven geo textile is woven with UV resistant slit film tape fibre with MAVR values of the following properties. Geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and U.V. resistance characteristics. Geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids.Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) = ≥35 kN/m  Tensile strength(CD) ( ASTMD 4595) = ≥35 kN/m  Tensile Elongation ( ASTMD 4595)= ≥5% & ≤30%  Grab Elongation ( ASTMD 4632)= ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs  Non woven Geo-textile for the inner layer It is needle punched non woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. It should resist UV degradation, rotting and alkalis. Weight (ISO-9864/ASTMD 5261) ≥300 Gms/Sqm.  Tensile strength(MD) ( ASTMD 4595) = ≥12 kN/m  Tensile strength(CD) ( ASTMD 4595) = ≥12 kN/m  Tensile Elongation ( ASTMD 4595)= ≥5% & ≤30%  Grab Elongation ( ASTMD 4632)= ≥5% & ≤30%  Tensile strength ( ASTMD 4632) = 1.5 KN  UV resistance( ASTMD 4355) = 70%/500 hrs  (Bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of Manufacturer and Batch Number is to be marked on each bag with “WRD Govt of ASSAM” to be printed on each bag and mentioning properly the GSM and type of Geo bag polymer. Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material). FOR GUWAHAT

Filling and laying of nonwoven Geo-textile bag of dimension 2.00m x 1.50m including excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt, having minimum volume 0.612 cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) Without boat

Filling and laying of nonwoven Geo-textile bag of dimension 2.00m x 1.50m including excavation of specified silt from flood plain or adjacent chars within a distance of 90m of the work site, filling geo bags with silt, having minimum volume 0.612 cum after filling,double locking chain stitching the mouth of the filled bags with polypropylene thread by power driven double needle machine, laying at proper site including all handling charges and local carriage within a distance of 100m complete as directed. (Geo Bag and Polypropylene thread will be supplied by the department free of cost) With boat

Supply of non-woven Geo-textile fabric sheets of 300 GSM manufactured from 100% virgin Polypropylene (PP) fibre with minimum properties as (i) Tensile strength ≥ 12 KN/m (ii) Mass ≥ 300.00 Gm/m ² (iii) CBR Puncture strength ≥ 3.5 KN (iv) Elongation at break ≥ 60% (v) Abrasion ≥ 70 % (vi) UV Resistance @ 500 hours ≥ 70% (vii) AOS ≤ 75 micron (ix) Permittivity ≥ 1.25, (x) Trapezoidal Tear Strength ≤ 340 N (xi) Permeability = 2.00 x 10 ̄ ³ m/sec (xii) Seam strength = 80 % of geotextiles strength . Stitching of Bags should be Ring Spun Yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (Each Roll of Geo Fabric Sheet should be supplied in properly packed Bundles and should be marked with the Name of Manufacturer & Batch Number clearly on each bundle with “WRD Govt of ASSAM” to be printed on it and mentioning properly the GSM and type of polymer and Test Certificate from approved NABL accredited and ISO Certified Laboratory should invariably be submitted against each batch of material) FOR GUWAHATI

Labour charge for laying Geo fabric sheet as filter bellow pitching including anchoring and complete as directed.

Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specification Clause 1302 cement concrete blocks of size as per Table 1300.2 cast in cement concrete of grade M15 (a) concrete grade M15

Supply of sewing thread/Yam PPMF stitching thread (2000 Den Kaplon) i/c payment of taxes

Providing and laying cement concrete in kerbs,steps and the like at or near ground level excluding the cost of centering shuttering and finishing 1:1.5:3 (1cement 1.5 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% :3 graded stone aggregate 20mm nominal size Recycled Concrete Aggregate (RCA) upto 25%)).

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Construction of temporrary shed of two roof with mud plinth of 0.45 m height above ground level with Bhaluka bamboo post 1.5 m apart driven at atleast 0.75 m below ground and height above plint 2.5m. Split Jatti bamboo wall mud plastering white washing 2 coats, 10 cm thick touch roofing over bamboo rua frame pplacing at 0.15 m clear apart fitted with bamboo kamies from binding doors and windows with Bamboo Chattai strengthening with Bamboo frame binding with wire etc compple as directed. (Using Bhaluka Bamboo at the rate of 6.00 nos/ Rm & Jati Bamboo at the rate of 61.00nos / Rm)

Supply of Pre stressed Cement Concrete (PSC) Porcupine members of size 0.10m X 0.10mX 3.00m with M-40 grade of cement concrete with graded broken course aggregates up to 12mm size down and reinforced with 4 Nos. of 4 mm dia high tensile steel wire cable at four corners with necessary cover and 4mm high tensile stirrups at 250mm C/C, in conformity with IS-6403 and stressed to required strength not exceeding 9.18 N/mm, holes of 16 mm dia at 50 cm inside from both ends in the same face and in either face of post another 2 Nos. of holes of size 16 mm dia at 65mm inside from both ends including properly curing for 14 (fourteen) days and carriage of porcupine members from factory to the stack yard within a distance up to 100 Km complete as directed.

Labour charge for launching of R.C.C. / PSC Porcupine including carriage of R.C.C./ PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m)a) Launching without boat.

Labour charge for launching of R.C.C. / PSC Porcupine including carriage of R.C.C./ PSC porcupine members of size 0.10m × 0.10m × 3.00m from the stack yard to the place of launching ,erection of the Porcupine with 6 (six) members properly, supply & fitting/fixing with 12 mm dia 25 Cm long M.S. Nuts and bolts and launching the porcupine properly as directed. (Lead up to 150 m)b) Launching with boat

Bhaba Kanta Nath