Electrical work

Amount

Renewal by Supply and Erection, Testing, Commissioning and Handing over of 1 No. 13 persons capacity passenger Lifts (884 Kgs) as per following technical specifications. 1.Number of Lifts / Type of lift: Two / Nextra -Passenger, Gearless with Machine Room. 2.Load/Speed: 13 Persons 884 Kgs.) / 1.6 Mtr. Per Second 3.Drive: Microprocessor based VVVF - Closed Loop 4.Travel/ PIT / HEADROOM: 18.6 Meter, / PIT 1580mm/ HEADROOM 6000mm 5. Number of Floors: 5 (Basement+ Ground + 4 Upper Floors) 6. Floor Display Char: Basement,0,1,2,3,4,5 7.Number of Landing Entrances: 5 (Basement+Ground + 4 Upper Floors) 8.Number and Position of Car Entrances: 1(ONE), In Front only 9.Position of Machinery: Directly above the Lift well - Gearless 10.Size of Lift well: 1840 x 2570(MM Wide * MM Depth ) 11.Lift Car Inside Size: 1600 x 1350 x 2200 x (MM Wide * MM Depth * MM Height * MMC- Value )

23. Emergency Alarm Bell: Battery operated Alarm Bell to be provided with automatic charging device. 24. Emergency Light: Battery Operated Light to be provided with automatic charging device. 25. Fireman's Switch: To be provided at Ground Floor 26. Minor Builders Work: To be Provided by lift Contractor 27. Scaffolding: To be Provided by lift Contractor. 28. Stainless steel still angles and facia plates: To be provided by lift contractor . 29. Steel for Lift machinery: To be Provided by lift contractor. 30. Servicing and Maintenance: Free Comprehensive servicing and maintenance should be provided by lift contractor during the guarntee period of One Year. 31. Provision of 1 + 3 EPABX intercom with phone to be provided at the following places vide: 1. Lift Head Room 2. Reception Room and 3. Inside the Lift by Lift Contractor. 32. Lift License: Preparation of drawing , Payment of charges to CEIG and insurance policy if any and obtaining CEIG safety certificate and lift license as per Lift act should be done by the lift contractor.

33.Automatic rescue device: To facilitate the landing of the nearest floor at the time of power failure. 34. This shall consist of suitable type battery system with charger inverter under voltage protection system etc., 35.All the features as per differntly abled persons act should be provided. Special Inclusions: 1. Call Register Signal and Vf Door Operator 2. Push Button - Orange LED Illumintion. 3 Full Car Operating Panel 4. Floor Annunciator 5. provision for CCTV Camara - Analog (Coaxial Cable) 6.. False Ceiling In Car 7. Fire Rating Of Landing Doors - Two hours 8. Infra Red Door Screen 9. Overload Warning Indicator 10.Pit Ladder 11.SS Handrail 12. Sill Support 13.Landing Push Box On Wall.

Rewiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour for Open PVC Light point / fan point (for electronic regulator)

Renewal by supply and fixing of like Havells PLUTOSURFACE 1X1PLS15W LED 857S fitting on ceiling with necessary connections. (Havells/ Equivalent make).

Renewal by Supply & Fixing of surface mounted bulk head fitting like Havells HEXAFT10WLED857SSYMBOPC for lift shaft. (Lift) (Havells/ Equivalent make).

Renewal by Supply & Fixing of 400mm sweep Wall mounted fan on the wall.

Renewal by Supply and fixing of 1 no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box ( Plastic ) with module cover plate (plastic) on wall with connections. Higher End shuttered with 16m front plate of suitable colour.

Renewal by supply and fixing of Vertical type 4 way MCB DB enclosure metal door with IP 42 protection with Four Pole 63 Amps MCB isolators as incoming and 4 Nos Triple pole MCB 6A to 32A, 10KA as outgoing on wall with earth connection.(The MCCB DB , MCB's & Isolators should be of Legrand / Hager/ Equivalent make).

Renewal by supply and fixing of Vertical type 8 way MCB enclosure metal door with IP 42 protection with Four Pole 100 Amps MCB isolators as incoming and 8Nos Triple pole MCB 6A to 32A, 10KA as outgoing on wall with earth connection.(The MCCB DB , MCB's & Isolators should be of Legrand / Hager make).

Renewal by supply and fixing of 100 A Four pole MCB (legrand Make) with suitable FP enclosure in flush with wall earth connection.

Renewal by supply and run of 2 of 2.5 sq.mm (36/0.3) pvc insulated sc unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14SWG TC wire with painting of suitable colour.

Renewal by supply and run 2 of 4 sq.mm (56/0.3) PVC insulated sc unsheathed cu. Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Renewal by Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Renewal by Supply and run of 4 of 16 sq.mm (140 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Renewal by Supply and clamping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamp.

Renewal by Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimpingwith electrical connection etc., complete.

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth Connection.

Renewal by Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Renewal by Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Vinoth Electricals