Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.2 LAccepted-AOC 368 PHASE 4 SAS NAGAR MOHALI 160059 PB | MOHALI | SAS NAGAR | PUNJAB | 160059 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹36.7 L+₹4.5 L (14.0%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹37.9 L+₹5.7 L (17.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹38.4 L+₹6.2 L (19.1%)Rejected-AOC H NO 1566 2 SECTOR 30 B CHANDIGARH | NA | NA | 160001 | L4 | Rejected-AOC Other than lowest bidder | |
| 5 | L5₹39.3 L+₹7.0 L (21.9%)Rejected-AOC 137 MODERN COMPLEX ZIRAKPUR DISTT MOHALI PB | ZIRAKPUR | MOHALI | PUNJAB | L5 | Rejected-AOC Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹86,000
Closing Date
22 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) Chandigarh
HQ CWE (AF) Chandigarh PIN-160003
PROVISION OF STORE AND WAITING AREA FOR FAMILIES AT SECTOR 31 AT AF STN CHANDIGARH
2023_MES_629620_1
CWE/AF CHD/CHD/T-30/2023-24
Open Tender
Civil Works
Item Rate
180 days
Chandigarh
As per NIT
8 documents required · 8 mandatory
₹500
GE(AF) Chandigarh
₹86,000
8 Feb 2024
23 Nov 2023
29 Dec 2023
23 Nov 2023
22 Dec 2023
8 Dec 2023
Amount
Excavation in trenches in soft/loose soil not exceeding 1.5 mtr wide and not exc 1,5 mtr deep and getting out complete all as specified and as directed.
Excavation over area not exceeding 1.5 mtr deep and getting out in soft/loose soil complete all as specified and as directed.
M & L for Hardcore broken stone or boulders of guage exc 63mm but n exc 100mm, deposited spread and levelled in layers n exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed
Material and Labour PCC 1:4.8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling & mass concrete complete all as specified and as directed.
Returning, filling in, including spreading, levelling watering and well ramming in layers, each layer not exceeding 25 cm thick complete all as specified and as directed.
Removal of surplus spoil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed.
M&L for RCC Type A1, 1:1.5:3 ( using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams; plinth beams; roof beam, bases for columns, basement slabs, under reamed piles and mass concrete complete all as specified and as directed.
M&L for RCC Type A1, 1:1.5:3 ( using 20 mm graded stone aggregate ) as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M&L for RCC Type A1, 1:1.5:3 ( using 20 mm graded stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), using old size bricks, complete all as specified and as directed.
M & L for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending etc., and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
All as per Item No 11 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.complete all as specified and as directed.
M & L for Formwork to sides of concrete foundations, footings, bases of columns, roof beams, raft and raft beams, columns, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed.
M & L for providing formwork to sides of Pillars, Posts,Struts, Piers, Columns etc for rough finished. flat surface of concrete complete all as specified and as directed.
M & L for providing formwork to the suspended slab such as roof slab, floor slab, landing and similar work not exceeding 20mm thick (Horizontal or sloping) for rough finished flat surface of concrete complete all as specified and as directed.
M&L for rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces in ceiling (such as chaja,beams, roof projection, balcony,mumty and staircase flight ceiling, roof slab etc.) finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of newly plastered or un plastered ceiling surfaces of any description and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of newly plastered or un plastered wall surfaces of any description and applying three coats of white wash complete all as specified and as directed.
M& L for first quality glazed ceramic coloured tiles 350x450/300x 600mm x7 to 8mm thick on vertical surfaces ie dado/skirting, set and jointed in neat cement slurry and pointed in white/colour cement to match shade of tiles over and including 10mm thick backing coat/rendering in cement mortar 1:4 complete all as specified and as directed.
M&L for First quality, Non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11Sq.m, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed in cement mortar (1:4) with and including pointing in white cement with pigment to match the shade of tiles complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F factory made moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded pre laminated PVC sheet on the front face & 2mm plain PVC sheet on back face, complete all as per manufacturer instructions complete all as specified and as directed.
S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type complete all as specified and as directed.
S&F 150mm long, aluminium anodized, barrel tower bolts of extruded section, ISI marked complete all as specified and as directed.
Supply and fix 125mm size aluminum handle extruded aluminum alloy, fabricated 'D' type, anodized, (ISI marked) complete all as specified and as directed.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and as directed.
S&F drapery rod of stainless steel of 25mm dia,fancy type, , any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall with stainless steel finols/finnels, connected accessaries, rubber packing, screws and PVC rawal plugs as required complete all as specified and as directed. Note: Rate quoted shall deemed to be included for brackets and all connected items.
S&F Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), with and including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices connected to drains outlet complete all as specified and as directed.
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm bore of pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.
S & F 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed.
S&F bib cock long body with flange, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed.
S&F 15mm dia bore tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed.
S&F 20mm dia bore tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and as directed.
S&F rotational moulded PVC, triple layered, white colour water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as Gl tank nipple etc. but excluding ball valve complete all as specified and as directed.
S&F ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore complete all as specified and as directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 15mm bore iron pipe and fixed complete all as specified and as directed.
S&F wash basins, vitreous china, white, rectangular type of size 550x400mm including cast iron brackets and cutting for and pinning in ends of brackets or erecting stand, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts complete all as specified and as directed.
S&F vitreous china urinal half stall type with CP spreader white with grating and union for discharge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.
S&F Brass CP central hole basin mixer with 450mm braided connection pipe (without pop-up) for mixing hot & cold water screwed down for 15mm bore of iron pipe complete all as specified and as directed.
S&F Wall mixer with L bend (provision for over head shower), cast copper alloy, chromium plated for mixing hot and cold water, screwed down for 15mm bore iron pipe complete all as specified and as directed.
S&F PVC waste pipe flexible suitable for Sink/ WHB of 32mm size complete all as specified and as directed.
S&F Rectangular Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long fixed with PVC raw! plugs and wooden screws complete all as specified and as directed.
S&F PVC bathroom cabinet mirror of size 400mmx500mm complete all as specified and as directed.
S&F towel rail 600 mm long, 20 mm dia, 'D' type, brass chromium plated, fixed to walls with screws and plastic cleats complete all as specified and as directed.
S&F brass chromium plated grating doom 125mm dia with or without hole complete all as specified and as directed.
S&F 75 mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-l (1:2:4) using 20mm graded stone aggregate complete all as specified and as directed.
M&L for cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges, bases for poles etc complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) pipes of pressure rating 6kgf/cm2, single socketed, in any length with rubber ring joints fixed to wall including mild steel clamps and bolts with washers and making good the mouth of rain water pipe in PCC 1:2:4 type-BO, using 12.5mm crushed stone aggregate complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bends any radius, fixed with solvent cement in any position complete all as specified and as directed.
M & L for light shade Vitrified ceramic coloured tiles, 9 to 10 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed in cement mortar (1:6)jointed and pointed in white cement with pigment to match the shade of tiles complete all as specified and as directed.
All as per item no 53 here-in-before but as in dado/skirting over 10mm thick rendering in CM 1:4 complete all as specified and as directed.
M&L for 25 mm thick, PCC (1 :2:4), type B-0 (12.5mm graded crushed stone aggregate) as in flooring finished even & rough to receive the bedding mortar complete all as specified and as directed.
M& L for 75 mm thick Cement concrete type Cl, 1:3:6 (using 20 mm graded stone aggregate) in plinth protection, finished even and smooth without using extra cement including forming of construction joint @ 2.5 meter Centre to centre & along with walls & filled with bitumen (80/25) and sand in ratio of 1:6 etc complete all as specified and as directed.
M&L for providing 75 mm thick cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base finishing even and rough to receive the top layer complete all as specified and as directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished even and fair without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour preparation of new plastered surfaces of walls and applying two coats of water based distmper with one coat of primer of the same Manufacturer/make over 1mm thick wall care putty to smoothening the surface by using sand paper complete all as specified and as directed.
Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered and pointed surfaces of wall/ceiling of any description upto double story building complete all as specified and as directed. Note: Weather proof exterior emulsion paint and primer shall be of same manufacturer.
S&F false ceiling with fully perforated 12mm thick micro tegular edges or 10mm thick sqaure edged GRG ( Glass fibre Reinforce Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than 2%, humidity resitance of 99%, NRCO.50 to 0.75 as per IS 8225: 1987, Non combustible as per BS 476 (part 4) -1970 and light reflectance of 85% (minimum), laid in true horizontal level suspended on interlocking metal T-Grid of hot dpeed galvanised iron section of 0.33mm thick (galvanised @ 120 grams per sqm including both both sides ) comprising of main T runners of size 15x32mm of length 3000mm cross-T of size 15x32 mm of length 1200mm and secondary intermediate cross T of size 15x32mm of length 600mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) ie 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm galvanised iron perimeter wall angle of size 24x24x0.4mm of length 3000mm fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws complete all as specified and directed..
S&F mild steel work as in tabular truss including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 of grade St-240 including all fittings complete all as specified and as directed.
S&F mild steel works such as wind ties for roof including securing with bolts etc and similar work using rolled section confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coated, GI based corrugated steel sheet 0.50mm thick of an colour (approved by GE) having tensile strength of 550Mpa as in roof covering/cladding to wall/fixed with self tapping screws complete all as specified and as directed.
All as per Sl item No 65 here-in-before but as in ridges, flashing board etc of width and girth not less than 610mm.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for chowkhat /shutters of doors, windows, ventilators, and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with equired EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed.
Supply and fixing, Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4 mm and fixed with aluminium wire staples, etc complete all as specified and all as directed.
S & F 4.8 mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares exceeding 0.5 Sq. m in each pane complete all as specified and as directed.
M&L for prelaminated particle board, 12mm thickness interior grade, prlaminated both sides with decorative choice lamination, fixed with screws in aluminium works complete all as specified and as directed
S&F Stainless steel tubing (Grade - 304) of any diameter or square or rectangular in shape, thickness of wall not less than 3.15mm of Austhetic anticorrssive in nature as in framed work/Posts/fencing work/ railings/grills/ designer work including cutting, bending, welding, grinding, buffing and bright polishing the welded joints and adjacent areas and fixing in any type of location complete all as speccified and as directed.
S&F 12mm thick toughened (high strength sound proof) glass fixed in slant position or as directed by the Engineer-in-Charge and fixed with aluminium glazing clips, rubber neoprene packing, aluminium snap beading and screw etc complete all as specified and as directed.
S&F 12mm thick toughned (high strength) glass door, fitted on floor spring (of Ozone Cam Action/Godrej/equivalent approved Make) alongwith closing force Double Cylinder Job (Weigh Capacity - not less than 150 - 200Kg), fixed in slant position or as directed by the Engineer-in-Charge and fixed with aluminium glazing clips, rubber neoprene packing, aluminium snap beading and screws etc with and including stainless steel handle of size 250mm long, 30mm dia and all other connected accessories complete all as specified and as directed.
M & L for high standard quality exterior/face tiles, rough/smooth finished of size 350mmx450mmx7 to 8mm thick, on vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white/colour cement to match over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
M & L for Granite (of any type ) 16-18 mm thick, work (table rubbed and polished) fine grained 'Z' black/red in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed of 15 mm thick in CM 1:3 complete all as specified and as directed.
Material and labour, factory made, precast concrete, machine pressed, interlocking paver block any shape and size confirming to IS : 15658-2006 of 60mm thickness, M-35 Grade, with precoated grey cement and pigment (in top layer), coloured complete all as specified and as directed.
M&L for 25mm thick fine sand cushioning and joints filling complete all as specified and as directed.
Excavation in post holes (or similar holes) each n exc 0.5 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and as directed.
M&L for Point wiring using PVC insulated Unsheathed stranded copper conductor FRLSH cable of size 1.5 Sqmm, drawn in and including concealed non metallic rigid PVC conduit medium grade including cutting chases for conduit and new sunken terminal boxes duly epoxy coated of suitable size with frame plate, cover etc for mounting of modular type switches, sockets, fan regulators etc with screws and 1.5 sqmm PVC insulated stranded copper conductor FRLSH cable as continuity earth wire connected to common earth dolly for One light/fan point controlled by one switch complete all as specified and as directed.
All as per Item No 79 here-in-before but One 3-pin socket outlet 5 Amp on independent board.
All as per Item No 79 here-in-before but One 3 pin socket outlet 5 Amp on same board
All as per Item No 79 here-in-before but but with 2.5 Sqmm copper conductor cable for One 3 pin socket outlet 15 Amp on independent board and 2.5 sqmm PVC insulated stranded copper conductor FRLSH cable as continuity earth wire.
M&L for Sub main wiring wiyh two single core 06 Sqmm PVC insulated stranded copper conductor FRLSH cable by drawing in and including surface/ concealed PVC non metallic rigid conduit and 06 Sqmm PVC insulated stranded copper conductor FRLSH cable as earth continuity wire connected to common earth dolly and all metal part/main switch complete all as specified and as directed. Note : 2 runs of 6 Sqmm main cable +1 run of 6Sqmm earth cable shall be considered as 1 Running Metre.
S&F Switch Modular type single pole one way 6 Amp complete all as specified and as directed.
S&F Switch Modular type single pole one way 16 Amp complete all as specified and as directed.
S&F Socket outlet 2/3 Pin combined 2 module Modular type single pole multi purpose 6 Amp complete all as specified and as directed.
S&F Socket outlet Modular 3 pin 6/16 Amp multipurpose, 240 volt complete all as specified and as directed.
S&F Ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified and as directed
S&F MCB single pole and neutral 240 volt ,10KA,B curve ,40 Amp to 63 Amp including connection complete all as specified and as directed
S&F MCBs SP 240 volt ,10KA,B curve , 6 to 32 Amp including connection complete all as specified and as directed
S&F sheet steel enclosure double door for DB SPN 240 voltS 16 way with 200 Amps rated bus bar complete all as specified and as directed.
S&F LED light fitting 1x9W/1X10W bulkhead lluminaries including LED light driver holder connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F LED luminaire 600mm x 600 mm 35/36 W,220V, AC (recessed type with high efficency PMMA diffuser soft glare free light complette with driver, holder including LED lamp suitable for roof ceiling and connecting up with driver with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
S&F 4 feet LED lights fitting 1x18W,220V,AC decorative box type with driver, holder including LED tube light connecting with flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.
S&F Supply and fixing post top latern LED type 20 watt 230 volt AC outdoor type with decorative post top for 360 degree indrict light IP 65 protection with impact and corrosion resistant complete all as specified and as directed.
S&F LED street light fitting 35 watt 230 volt AC outdoor type with high pressure die cast aluminum housing and heat resistant complite with driver ,lamp bracket with impactand and corrosion resistant including thermal management in muitipal optic with IP 65/66 protection complete all as specified and as directed.
S&F Metallic body wall mouunted fan 400 mm sweep, 230 volt AC, complete all as specified and as directed. Make : Orient Model Electric wall-43 400mm or equivalent model of make specified in Appx 'B'.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground vertically (depth of pit not less than 2.25 m below normal ground level), with top edge of earth plate not less than 1.5m below normal ground level, earth plate surrounded from all sides by 15cm thick packed alternate layers of charcoal dust and common salt, electrode connections using galvanized iron wire 4mm dia (upto body of equipment) by means of nuts, bolts, check nuts & GI washers, connected to main switch board or main control board or test point, protected by galvanized iron pipe light grade 15mm dia bore, and watering pipe 20mm dia bore GI medium grade with funnel & wire mesh including all necessary excavation & earth work, PCC chamber in PCC (1:2:4) type B-1 & RCC cover, all as shown in electrical plate No 3 of MES Schedule Part-I (2009), testing on completion, complete all as specified and as directed. Note(s) :- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with XPM not less than 4Kg/Sqm. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include GI strip and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3 Ohm. In case the test results are not found below 3 Ohm, complete earthing will be redone without any extra cost to Govt.
S&F meter box of size 120x90x20 cm made (sheet metal enclosure) out of MS sheet 2mm thick duly powder coated internall / externally with locking arragements, glass cover for taking meter reading, having sufficient working space; including these accessories:- (a). MCB single pole and neutral 240 volt 40 Amp to 63 Amp - 06 No (b). Taking up/removal of existing energy meter and fixing the same into the new meter box - 05No (c).Plywood sheet 4mm thick for fixing the energy meter,TPN DB incluuding MCB,MCCB - 01 No (d) Double door DB - 12 way -01 No (e)Taking up/removal of existing double door TPN DB incluuding MCB,MCCB and fixing the same into the new meter box - 01No
shree balaji builders
Upinder Gupta & Co.
MOHAMMAD RASHID
SS BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .