COMPREHENSIVE MAINT OF BLDGS OF OTM ACCN OF 26 MADRAS,27 MARATHA LI AND GE OFFICE UNDER GE (A) JAMNAGAR AT MIL STN JAMNAGAR

Amount

M&L Preparation of old surfaces of ceiling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying one coat of white wash complete all as specified and directed by Engineer-In-Charge.

M&L preparation of old painted surfaces of wood/ wood based materials of any description over 10Cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and directed by Engineer-In-Charge.

M&L preparation of old painted surfaces of steel/ iron of any description over 10Cm width or girth and applying one coat of synthetic enamel paint etc. complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of old surfaces of wall removing nails including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) , filling undulation and holes with putty and applying one coat of oil bound distemper with roller finish complete all as directed.on walls etc.complete as specified and as directed by Engineer-In-Charge.

M & L for preparation of old surfaces of walls, chajja, projections including rubbing down and stopping nail holes etc and applying one coat of cement base paint on walls complete all as specified and directed by Engineer-In-Charge.

M&L Preparing old decorated surfaces by complete removal of existing treatment, scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on Two coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9lit/10 sqm complete all as specified and directed by Engineer-In-Charge.

M&L Preparing old decorated surfaces by scraping down, washing, rubbing down and stopping of painted surface of walls & ceiling including roof projection / chajjas and by hand held sander / long handle sander including cornices, pilasters etc (Plastered or unplastered surfaces) and applying Finishing walls with one coat of Premium Acrylic Smooth exterior paint with Silicone additives of required shade applied (@ 0.72ltr/10 sqm) complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster on brick, stone or concrete surface including racking out joints hacking for key scrubbing down with water to receive plaster a, etc complete all as specified and directed by Engineer-In-Charge.

M & L for rendering 15mm thick plaster in CM (1:4) on fair faces of stone masonry/brick/concrete surfaces or surfaces other than fair faces of brick work, finished even and fair without using extra cement complete all as specified and directed by Engineer-In-Charge.

M & L for rendering 10mm thick plaster in CM (1:6) on surfaces of brick work/ stone masonry /concrete surface, finished even and fair without using extra cement complete all as specified and directed by Engineer-In-Charge.

M & L for Rendering 5mm thick plaster in CM 1: 4 to ceiling, finished even & smooth with using extra cement complete all as specified and directed by Engineer-In-Charge.

Preparation of newly plastered surfaces of wall incl sweeping clean with brush to remove loose dust, sand, etc and applying two coats of heavy duty waterproofing coat (Dr Fixit Wounderproof-1 or equivalent) by mixing water @ 25-30% to make slurry coating and allow 4 to 6 hrs time for drying up of first coat before application of second coat in perpendicular direction of first coat and further left to dry for 4 hrs complete all as specified and directed as per manufacturer instructions.

M & L for preparation of new plastered surfaces of walls and applying one coat of primer, preparatory to distempering and evenly applying two coats of oil bound distemper (oil emulsion) on walls matching to nearby surface complete all as specified and directed by Engineer-In-Charge.

M & L for preparation of newly plastered or unplastered surfaces including cornices, pilasters etc and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-In-Charge.

M&L Preparation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engineer-In-Charge.

Removing the plant/growth of any description size, any location of external surfaces of walls shafts by cutting & remvoing the roots completely spraying the suitable chemical (each plant 100 ML) in the removed portion to avoid re-growth & making good damaged portion to match the existing surfaces by PCC type B0 (1:2:4) 12.5 mm graded aggregate complete all as directed by Engr In Charge (Chemical :- Gramzone/Roundup or equavalent suitable chemical to remove/destroy the plants/roots)

Complete Removal of existing treatment on wall and applying two coats of oil bond distemper over a coat of primer over and including 3 mm putty complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm but n.exc 4.0 sqm complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm complete all as specified and directed by Engineer-In-Charge.

Taking down shutters of any description exc 1.0 sqm and nexc 2.0 Sqm each complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class hard wood in plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned joints including necessary tarrying and sanding complete all as specified.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel designed with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face incl particle board core complete all as specified and as directed.

S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 35 mm thick Flush shutters, solid core constuction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood factory made glazed & skeleton door shutter open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

S&F100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed,type B1

S&F Extruded aluminium alloy handles 150mm long, fabricated type, anodised.

S&F Aluminium anodised barrel tower bolts, 150 mm long, of extruded section.

M&L preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

S&F powder coated aluminium sliding window of 3 tire, frame of section 62mm X 32mm X 1.47 mm or appropriate equivalent section and shutters of section 18 mm X 44 mmX 1.35 mm or appropriate equivalent section fixed with 4 mm thick tinted sheet glass with rubber gasket, handles, locking arrangement and aluminium incl making good jambs, cills etc and including taking down old iron window complete all as specified and directed by the Engr-in-Charge.

S&F in powder coated aluminium fixed louvered ventilator, frame of section 63.5mm X 38.1mm X 1.01 mm or appropriate equivalent section with 4 mm thick figured/frosted sheet glass with rubber gasket,Aluminium wire mesh, handles, locking arrangement etc incl making good jambs, cills etc and including taking down old iron ventilator complete all as specified and directed by the Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for window grills etc complete all as specified and directed by Engr-in-charge.

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charge.

M&L for preparation of new steel surfaces exc 10 cm in width or girth and applying two coats synthetic enamel paint over a coat of red primer complete all as specified and directed by Engr-in-charge.

S & F in repair stainless steel wire cloth 0.36mm dia of wire and avarage width of aperture 1.40mm and fixed with stainless steel wire staple complete all as specified and directed by Engineer-In-Charge.

S&F 4mm thick, sheet glass, ordinary quality and glazing with oil putty in square/rectangular n.exc 0.5 sqm in each pane including hacking out old broken&pin glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads, all as specified and directed

S&F False ceiling work comprising GI frame work of size 605 x 605mm, for seamless celling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx. 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and 4mm thick Non asbestos fibre cement building boards (E-boards) fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling , including taking down old false ceiling including frame work and hangers, complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in any position not otherwise specifically provided complete all as specified and as directed by Engr-in-charge.

M&L filling PCC type D2 1:5:10 (40 mm graded stone aggr) as in sunken floor after applying appropriate treatment to side walls complete all as specified and as directed by Engr-in-charge.

M&L 15mm thick rendering in cement plaster 1:3 with WPC on vertical sides of sunken floor incl finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-charge.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded mixed with liquid water proofing compound @ 0.200 litre per bag of 50 Kg of cement in bottom of sunken floors

M& L complete preparation of efforescence or wetted internal wall surface using wire brush to remove all the loose laittence & wash with clean water and applying crack filling as directed on site wet the wall prior to over coating brush apply 1 primer coat of Dr fixit Primeseal & allow to dry for 4 hours , apply damp proof coating Dr fixit Damp guard, Blend a mixture of Dr Fixit damp guard & water in the ratio 1:1:1(Base: Hardner: Water) & brush apply 2 coat over the plastered surface in a span of 4 hrs, over coat of walls with the suitable protective (decorative) coating complete all as specified and directed Make : Dr Fixit or techno commercially Equivalent product complete all as specified and as directed by Engr-in-charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and as directed by Engr-in-charge.

M&L Non skid Ceramic coloured Joint free tiles of 7-8mm thick (area of each tile exceeding 0..06 Sqm but n.exc. 0.11 Sqm) as in floor set and jointed in neat cement slurry and pointed in white cement with pigment to match the colour of tiles over and including 15mm thick bedding layering cement mortar (1:6) complete all as specified and directed by Engr-in-charge.

M & L for Glazed ceramic tiles, coloured (light colour as approved), of size 450X 350X 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:3) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge.

S&F Coloured Vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles n exc 0.36 sqm in floors & skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match in light shade including 20mm thick screed bed in CM 1:6

M&L 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 20 mm thick screed bed in CM 1:6 all as specified and as directed by Engr-in-charge.

Moulding to Granite(single or double) slab including rounding off edges for 20 mm thick slabs including grinding and polishing

M&L Machine cut kota stone slab 20-25mm thick as in vertical partition, pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Supply, lay, connect and test GI tubing ,medium grade with all fitting, laid in trenches, or fixed to walls with clamps, floors, ceiling or laid in trenches etc. complete of 20 mm bore , fixed in repairs complete all as specified and as directed

Supply, lay, connect and test GI tubing ,medium grade with all fitting, laid in trenches, or fixed to walls with clamps, floors, ceiling or laid in trenches etc. complete of 25 mm bore, fixed in repairs all as specified and as directed by Engr-in-charge.

S&F fixed in repairs Vitreous China wash down water closet (Pedestal pattern) white with concealed S-Trap/P-trap, 360mm wide, 390mm high and 415 to 445mm long at top excluding( fixing bolt, flushing cistern and flushing pipe) etc complete all as specified and as directed by Engr-in-charge.

S&F in repairs counter sunk Vitreous china wash basin (560x410x180mm), white including mounting on granite slab 20mm thick brass chromium plated perforated waste coupling/fittings 32mm dia with long screwed shanks and fly nut, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length all as specified

S&F fixed in repairs Vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets excluding taps, waste, chain and plug and porcelain stopper but including chromium plated brackets, restoring all connections, all as specified and as directed by Engr-in-charge.

S&F 10 litre capacity low level PVC flushing cistern (white), PVC low level flushing cistern 10 litres capacity valve less symphonic action type, ISI Marked white with inlet, ball valve, float and handle including brackets, fixed in repairs all as specified and as directed by Engr-in-charge.

S&F in repairs Brass CP Wall Mixer 3 in 1 system, for mixing hot & Cold water with provn.of both hand shower and overhead shower complete with 115mm long bend pipe and wall flange(without hand and overhead shower), all as specified and as directed by Engineer-In-Charge. Model Jaquar COP-CHR-119PM or eq model of make specified in Appx 'B'

S & F in repairs Fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch screwed down fixed in repair / replacement complete all as specified and directed. Make: Jaquar Model No. CON-107KN or equivalent model of make specified in Appx 'B'

S&F in repairs Central Hole Basin Mixer, cast copper alloy,chromium plated, including taking down old unservicable one, all as specified and as directed by Engineer-In-Charge. Model Jaquar CON-CHR-167KNB or eq model of make specified in Appx 'B'

S&F in repairs angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.(Make: Prayag,Jaquar,Cera or equivalent make specified n Appx 'B'

S&F in repairs Brass chromium plated shower rose 100 mm size along with 190mm long shower arm casted and 15mm dia with swivel joint and arm including fixing to steel pipe or union complete fixed in repairs, all as specified and as directed by Engr-in-charge. Make: Jaquar Model No. OHS-1789 & SHA-477 or equivalent model of make specified in Appx 'B'

S&F in Repairs Soap dish fancy type all as specified and as directed by Engineer-In-Charge. Cat No ACN-1131N of Jaquar or eq model of make specified in Appx 'B'

S&F in Repairs Toilet paper holder fancy type all as specified and as directed by Engr-in-charge.

S&F in Repairs Glass shelf 300mm with bracket complete all as specified and as direcetd.

S & F in repairs PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent etc. making good floor with matching specifcation all as specified and as directed by Engineer-In-Charge.

S&F in repairs PVC(SWR) pipe 110 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F in repairs PVC(SWR) pipe 75 mm dia, conforming to IS-13592-1992 type 'B', single socketed in any length with rubber ring joints, laid in trenches or in floors.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal specified and directed by Eng-in-charge

S&F in repairs PVC(SWR) bend any radius, 110 mm dia.provided with access door specified and directed by Eng-in-charge

S&F in repairs PVC (SWR) junction double, (double T), equal or unequal provided wit access door specified and directed by Eng-in-charge

S&F 500ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm PTMT ball/float valve, fixed in repair all as specified and as directed by Engr-in-charge.

S&F 1000ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with 20mm PTMT ball/float valve,fixed in repair all as specified and as directed by Engr-in-charge.

S & F vitreous china squatting Pan “ Orissa” Pattern , of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and as directed by Engr-in-charge.

M & L for writing letters of figures (Block Roman, Italic, or Indian) of 10cm height with stencil i.e. "TANK CLEANED ON ____________ 2024-25 with using synthetic enamel paint incl back ground paint etc complete all as specified and directed by Engr - In- Charge.

Cleaning of service water tanks and any type of capacity by removing organic materials & dirt etc. from wall and base after bailing out/opening wash out and plugging inlet pipes and washing the walls and base by applying bleaching powder or any other approved by Engr-In-Charge and filling with fresh water and replacing the top cover in position etc for the following capacities of tanks . (a) Exc 250 but not exceeding 500 Ltr.

(b) Exc 500 but n. exc 1000 Ltrs

Taking down carefully exising unserviceable aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including drawn through in and including heavy duty, PVC casing caping including all accessories etc of white/ ivory colour including all accessories heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(e) One bell point controlled by one, bell switch 5 Amps

Description all as per item No 85 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 87 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

Description all as per item No 89 here in before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and as directed by Engr-in-charge.

S & F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and as directed by Engr-in-charge.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engr-in-charge.

S & F for Modular Switch Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and as directed by Engr-in-charge.

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete complete all as specified and as directed by Engr-in-charge.

S & F for for Bell push modular 6 Amps single module complete all as specified and as directed by Engr-in-charge.

S & F for Switch piano flush type, single pole, one way, and 5/6 Amp complete all as specified and as directed.

S & F for Switch piano flush type, single pole, one way, and 15/16 Amp complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F ceiling fan regulator socketed step type, flush type heavy duty suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 4 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 4.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 4.0 sqmm cable,one run of 4.0 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable,one run of 6.0 sqmm cable and one run of PVC heavy duty conduit will be measured as one unit

S & F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed by Engr-in-charge.

S & F for sheet metal enclosure MCB DB TPN 4 way Vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 V breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F for wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BCLAB 20W LED P S, Wipro Cat part No LL24R-251-XXX-57-XX or its equvalent in Philips Cat part No BN100C LED20S-6500 PSU L120 GR S4 or Havells.

S & F for LED tube light fitting with aluminium housing 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting ith warranty option of 5 years from date of installation complete all as specified and as directed by Engr-in-charge. Make :- Bajaj or its equvalent in Wipro, Philips, Havells.

S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting with warranty option of 5 years from date of installation including LED bulb complete all as specified and as directed. Make :- Bajaj Cat No BIBWP 10W LED, Wipro Cat part No LW07-141-XXX-57-G1 or its equvalent in Philips Cat part No WT202W LED6S NW PSU S2 PC.

S & F for LED down light luminaire round shape 12 watts, white finish operating voltage 150 Volts - 270 Volts AC, 50 Hz, surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size with warranty option of 5 years from date of installation complete all as directed by Engineer- in-charge. Make :- Bajaj Cat No BPSLR Surface 12W LED WH RD SD, or Philips Cat Part No SM250C LED12S- 6500 PSU WH, or Wipro Cat part No LD06-151XXX-57SMG1

S & F for LED luminaire 600 mm x 600 mm square LED panel 24/30 watts, 220V AC surface type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cable of suitable size with warranty option of 5 years from date of installation complete all as directed by Engineer- in-charge.Make :- Bajaj Cat No BZSSQL 36L LED WH GX or Philips Cat Part No SM366C LED32-6500 PSU OD WH, or Wipro Cat part No CRCO10R036HP57G2.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25/35 watts with pre wired and necessary mounting arrangements with warranty option of 5 years from date of installation and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Cat part No ENXT P 30L WH CR PC SD, or Wipro Cat part No LR02-291-XXX-57-XX, or Philips Cat part No BRP042 P LED25 CW SLE S1 PSU GR P4210.

Fixing only light fitting of any type obtained from item No 1 with necessary electrical connections complete all as specified and as directed.

S & F for for lamp holder, PVC body of brass suitable for batten fitting including removal of old unserviceable one completes all as specified.

S & F for ceiling rose, surface Bakelite suitable ISI marked for batten fitting including removal of old unserviceable one complete all as specified

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 volts breaking capacity 10 KA including removal of old unserviceable one complete all as specified and as directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 1.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 2.5 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 4 Sqmm from point wiring including removal old existing unserviceable one complete all as specified and directed.

Supply and replace single core cable PVC insulated and unsheathed multistranded copper conductor of size 6 Sqmm from sub main wiring including removal old existing unserviceable one complete all as specified and directed.

S & F for Switch piano flush type, single pole, one way, and 5/6 Amp including removal of old unserviceable one complete all as specified and as directed.

S & F for Switch piano flush type, single pole, one way, and 15/16 Amp including removal of old unserviceable one complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, piano flush type including removal of old unserviceable one complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5 Amp, piano flush type including removal of old unserviceable one complete all as specified.

S & F for Step type fan regulator 100 watt socket type suitable for 230 volt 50 Hz AC supply including removal of old unserviceable one complete all as specified and as directed.

S & F for for lamp holder, PVC body of brass suitable for batten fitting including removal of old unserviceable one completes all as specified.

S & F for ceiling rose, surface Bakelite suitable ISI marked for batten fitting including removal of old unserviceable one complete all as specified

S & F for Hylem sheet cover 3 mm thick, ISI marked including cutting with existing suitable size of MS sunken box with necessary screws etc and re fixing of existing switches, fan regulators and sockets etc including removal of old unserviceable one complete all as specified

S & F wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including removal old existing unsv light fitting complete all as specified and as directed. Make :- Make :- Make Bajaj Cat part No BCLAB 20W LED P S, Wipro Cat part No LL24R-251-XXX-57-XX or its equvalent in Philips Cat part No BN100C LED20S-6500 PSU L120 GR S4 or Havells.

S & F wall mounted LED box type tube light fitting 4' x 20 watts industrial commercial interior batten for pendent mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements from ceiling to required height , provision of new 3 core multistranded copper conductor from ceiling rose to fitting including removal old existing unsv light fitting complete all as specified and as directed. Make :- Make Bajaj Cat part No BLTRU nxt SP 24L WH PC SD, Philips Cat Part No BN308C LED20S-6500 L60 PSU WH or Wipro Cat part No E23-251-XXX-57-2F*

S & F for LED tube light fitting with aluminium housing 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting ith warranty option of 5 years from date of installation including removal old existing unsv light fitting complete all as specified and as directed.Make :- Bajaj or its equvalent in Wipro, Philips, Havells.

M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in grond (earth pit not less than 2.25 mtrs below normal ground level) with the top edge of the plate not less than 1.5m below the normal ground level connected to GI wire 4.00mm dia protected by 15mm bore GI pipe light grade) and watering pipe 20mm bore GI pipe (medium grade) and chamber PCC (1:4:8) type D2( using 40mm grade stone aggregate), MS FUNNEL with wire mesh ,coping shall be PCC (1:3:6) type C1 using 20mm graded stone aggregate and RCC (1:2:4) type B1 using 20mm graded stone aggregate, pit cover 50mm thick reinforced with 8 mm MS bar at 80mm c/c both way in lieu of CI pit cover with lifting hook including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No-3 of SSR part-I and as specified including earth plate packed around with charcoal dust common salt complete including GI sheet funnel, wire mesh, earth lead wire 4mm dia and earth lead connected to earthing test point/ main board. The GI earth wire 8 SWG under the earth and on pole/db upto a height of 1.5m shall also be protected by 15mm dia GI pipe (light grade ) and the GI pipe to be fixed with poles/wall by means of 02 Nos. FI clamp 25x3mm with nuts bolts and washer etc. incl taking down old earthing complete all as specified and directed by Engineer-in-Charge. Note :- GI earthing wire 4mm dia and protected pipe 15 mm dia of same size upto 7.5m shall deemed to be included into quoted rate

SHAM AND CO (BID ID -3055219)

sanu enterprise (BID ID -3069877)

Prashiv Enterprise (BID ID -3061748)