REPAIRS TO VILLAGE TANK AT BELKHEDA TQ. ACHALPUR. DIST. AMRAVATI

Item No 1:- Site Clearance including cutting thormy shrubs, bushes,grass as directed etc complete with all lead and lift as directed by Engineer -In-Charge

Item No 2:-Excavation in all kind of soil,silt,soft murum, Hard Murum, Hard Man, Kankar including boulders upto 0.6 m dia including dressing bed and sides, desposing the excavated materials as and where directed with all leads and lifts etc complete as directed by Engineer-In-Charge A) For Benching,Harting Opening, Toe Drain

B) For Desilting and Deepening of Tank

C) Waste Weir

Item No 3:- Providing Harting Embackment using selected pervious material including transporting the material cost of material machinery labour all other operations such as collection of soil, spreading soil in layers of specific thickness sorting out breaking clods leveling edges / sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with all lead and lifts as directed by Engineer -In-Charge A) For Available Directly from Excavation

Item No 4:- Providing Casing Embackment using selected pervious material including transporting the material cost of material machinery labour all other operations such as collection of soil, spreading soil in layers of specific thickness sorting out breaking clods leveling edges / sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with all lead and lifts as directed by Engineer -In-Charge A) For Available Directly from Excavation

Item No 5:- Providing and laying in situ cement concrete of grade M-15 of trap/granite / gneiss/ quatzite / graded matel with or without surface reinforcement / RCC concreting requiring special types of shuttering with Concrete Mixer with shuttering and scoffolding, placing, compacting, curing with all lead and lift etc complete as directed by Engineer -In-Charge. M-15 (40 MSA) (Cement 5.2 Bags/Cum )

Item No 6:-Providing Fabricating and placing in position Mild Steel/HYSD/ TMT bar Reinforcement of various diameter for RCC Work, including cutting, bending, hooking, binding with wire, tack welding and supporting as required as per standard specification with all leads & lifts etc complete as directed by the Engineer-In Charge

Item No 7:- Providing and fixing information board of size 1.2x075 m Prepared on 16 guage ( 1.6 mm) thick steel sheet painted with one coat of zinc chromate stoving primer and two coat green back ground while border / messages symboles etc and back side in grey stove enamel paint including M.S. angle iron post of size 35 mm x 35mm x3 mm and two MS angle iron post of size 50 mm x 50 mm x5 mm 3.65 m long properly cross braced with angle iron of size 50 mm x50mmx5 mm duly painted with including G.I. fixtures etc and fixing the board in 1:4:8 concrete block of size 60 cm x 60cm x75 cm including transporation etc complete. The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded, retroreflective sheeting should be with five years writen warrently from the etc complete