Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹53.8 CrAccepted-AOC PREM KUNJ APARTMENT FLAT NO 3C MPD ROAD JAGDISHPUR BHAGALPUR BIHAR | BHAGALPUR | BIHAR | 811211 | ₹53.8 Cr | L1 | Accepted-AOC L1 Letter No. 5460(S)WE Date-05.12.2023 |
| 2 | L2₹54.4 CrRejected-Finance AT CHAPARIA PO KOIRIDIH PS JASIDIH DIST DEOGHAR JHARKHAND PIN 814153 | GODDA | JHARKHAND | 814153 | ₹54.4 Cr | L2 | Rejected-Finance L2 Letter No. 5460(S)WE Date-05.12.2023 |
| 3 | L3₹54.8 CrRejected-Finance 504 MANGAL MURTI HEIGHTS RANI BAGAN HARMU ROAD RANCHI | RANCHI | JHARKHAND | 829205 | ₹54.8 Cr | L3 | Rejected-Finance L3 Letter No. 5460(S)WE Date-05.12.2023 |
| 4 | Rejected-Technical AT NEW AREA DHARAMPUR SAMSTIPUR BIHAR 848101 | SAMASTIPUR | BIHAR | 848101 | - | - | Rejected-Technical Non Responsive |
Tender Value
₹49.9 Cr
EMD Value
₹49.9 L
Closing Date
3 Jul 2023, 12:00 pmClosed
Executive Engineer, RCD, Road Division, Godda
Executive Engineer, RCD, Road Division, Godda
Widening, Strengthening and Reconstruction of Godda Dande road via Dewbandha, Mohani and Shivnagar road (Total Length- 17.809 Km)
2023_CECOM_72406_1
RCD/GODDA/752/2023-24 (2nd Call)
Open Tender
Civil Works - Roads
426 days
Opening point- Godda Asanbani Chowk (NH 133)
Please refer Tender documents.
3 documents required · 3 mandatory
₹10,000
Executive Engineer, RCD, Road Division, Godda
₹49.9 L
Chief Eng. (Comm), RCD, Jharkhand, Ranchi
8 Dec 2023
13 Jun 2023
5 Jul 2023
13 Jun 2023
3 Jul 2023
20 Jun 2023
19 Jun 2023
Amount
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, sapling and tress girth upto 300 mm, removal of stumps of tree cut earlier and disposal of unserviceable materials and stacking of sericeable material to be used of auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150mm in thickness. By Manual means:- In area of light jungle vide R.C.D. S.O.R. 2.3 (iii) A
Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 300 mm to 600 mm vide R.C.D. S.O.R. 2.01(i)( A+B)(a)
Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 600 mm to 900 mm vide R.C.D. S.O.R. 2.01(i) (A+B)(b)
Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth from 900 mm to 1800 mm vide R.C.D. S.O.R. 2.01(i) (A+B)(c)
Cutting of Trees, including Cutting of Trunks, Branches and Removal (Cutting of trees, including cutting of trunks, branches and removal of stumps, roots, stacking of serviceable material with all lifts and up to a lead of 1000 mtrs and earth filling in the depression/pit.) Girth above 1800 mm vide R.C.D. S.O.R. 2.01(i)(A+B)(d)
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) Lime /Cement Concrete By Manual means Cement concrete Grade M-15 & M-20 vide R.C.D. S.O.R. 2.04 (i)B
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) Prestress/RCC grade m20 & above By Mechanical means vide R.C.D. S.O.R. 2.04 ( II)IC
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) Dismantling Stone Masonry Rubble stone masonry in cement mortar. vide R.C.D. S.O.R. 2.04 (iii) B
Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres) Removing all type of hume pipes and stacking within a lead of 1000 metres including earthwork and dismantling of masonry works. AB above 600-900 mm dia vide R.C.D. S.O.R. 2.04 (ix) B
Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.) (i) By Mechanaical Means using Hydraulic excavator vide R.C.D. S.O.R. 3.15 (i)
Removal of Telephone / Electric Poles and Lines (Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately) vide R.C.D. S.O.R. 2.14
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator of0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m) Including Royalty etc@ Rs. 27.48 per cum, cost of watering, rolling & compaction. vide R.C.D. S.O.R. 3.06
Construction of Embankment with Material Deposited from Roadway Cutting (Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2) Rolling with vibratory roller Rate per cum after adding royalty@Rs 27.48/cum vide R.C.D. S.O.R. 3.17
Embankment Construction & Shoulder construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) Rolling with vibratory roller vide R.C.D. S.O.R. 3.16
Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2) Rolling with vibratory roller vide R.C.D. S.O.R. 3.18 (i)
Granular Sub-Base with Coarse Graded Material ( Table:- 400- 2) (Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) Grading-v vide R.C.D. S.O.R. 4.01B(V)
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.) With Vibratory Roller vide R.C.D. S.O.R. 4.14 (B)
Dry Lean Cement Concrete Sub- base(Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.) vide R.C.D. S.O.R. 6.01
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing ) vide R.C.D. S.O.R. 6.02
Prime coat (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. vide R.C.D. S.O.R. 5.01(A)i
Tack Coat(Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) vide R.C.D. S.O.R. 5.02(ii)
Tack Coat (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom). vide R.C.D. S.O.R. 5.02(i)
Dense Graded Bituminous Macadam (Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4.5 percent by weight of total mix and filler, transporting the hot mix to work site laying with a hydrostatic paver finisher with sensor control to the required grade level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 complete in all respects with VG-30 Bulk Bitumen. Grading-(ii) (19mm nominal size) vide R.C.D. S.O.R. 5.04AB
Bituminous Concrete (Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects with VG-30 Bulk Bitumen. for Grading-II(10 mm nominal size) vide R.C.D. S.O.R. 5.05AB
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm equilateral triangle vide R.C.D. S.O.R. 8.04A(II)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 60 cm Equilateral triangle vide R.C.D. S.O.R. 8.04A(iv)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 60 cm Circular vide R.C.D. S.O.R. 8.04A(VIII)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 80 mm x 60 mm rectangular vide R.C.D. S.O.R. 8.4A(X)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 60 cm x 45 cm rectangular vide R.C.D. S.O.R. 8.04A(XII)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 60 cm x 60 cm square vide R.C.D. S.O.R. 8.04A(XIII)
Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing 90 cm high octagon vide R.C.D. S.O.R. 8.04A(XV)
Direction and Place Identification signs with size more than 0.9 sqm size board. (Providing and erecting direction and place identification retro- reflectorised sign asper IRC :67 made of encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing) vide R.C.D. S.O.R. 8.06
Overhead Signs (Providing and erecting overhead signs with a corrosion resistant aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans) Truss and Vertical Support -cantilever gantry vide R.C.D. S.O.R. 8.07A
Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) 5th kilometre stone (precast) vide R.C.D. S.O.R. 8.14 (i)
Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) Ordinary Kilometer stone (Precast) vide R.C.D. S.O.R. 8.14 (ii)
Boundary pillar (Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25-1967, fixed in position including finishing and lettering but excluding paintin vide R.C.D. S.O.R. 8.16
Road Delineators (Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide stripes, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and confirming toIRC-79 and the drawings.) vide R.C.D. S.O.R. 8.15
Road Markers/Road Stud with Lense Reflector (Providing and fixing of road stud 100x 100 mm, die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS 873 part 4:1973) vide R.C.D. S.O.R. 8.35
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) vide R.C.D. S.O.R. 8.13
Painting Two Coats on New Concrete Surfaces (Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces) vide R.C.D. S.O.R. 8.08
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications for Culverts vide R.C.D. S.O.R. 14.04
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. RCC Grade M20 vide R.C.D. S.O.R. 12.08 ( C )
Fixing of reflective sheeting including all cost of materials and fitting charge complete works as per specifications and direction of E/I.
Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) by mechanical means (i) Ordinary Soil Depth upto 3 m vide R.C.D. S.O.R. 12.1 I B(i)
Levelling Course for Pile cap(Providing and laying of PCC M15 levelling course 100 mm thick below the pile cap.) vide R.C.D. S.O.R. 12.41 CaseI
Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. Pile diameter-1200 mm vide R.C.D. S.O.R. 12.25
Cement Concrete for Reinforced Concrete in Pile Cap complete as per Drawing and Technical Specification ©RCC Grade M30 RCC Grade M30 using batching plant & Concrete pump vide R.C.D. S.O.R. 12.40C CaseI
Providing Steel Liner 10 mm thick for Curbs and 6 mm thick for Steining of Wells including Fabricating and Setting out as per Detailed Drawing. vide R.C.D. S.O.R. 12.22
Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications vide R.C.D. S.O.R. 14.02
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications RCC Grade M30 Height upto 5m With Batching Plant, Transit Mixer and Concrete Pump vide R.C.D. S.O.R. 13.05 G -P
Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification vide R.C.D. S.O.R. 14.11
Drainage spouts complete as per Drawing and Technical Specifications. vide R.C.D. S.O.R. 15.17
Supplying , fitting and fixing in position true to line and level elastomeric bearing conforming to IRC:83 (Part-II) section IX and clause 2005 of Mort&H specification complete including all accessories as per drwaing and technical specificationsvide R.C.D. S.O.R. 13.16
Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M 30 Using Concrete Mixer For solid slab super-structure, 20-30% of (a+b+c) Height upto 5m vide R.C.D. S.O.R. 14.1 C Case I (i) p
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification vide R.C.D. S.O.R. 14.10
Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC/PSC Grade M35 Using Batching Plant, Transit Mixer and Concrete Pump For T-beam & slab, 23-33 per cent of (a+b+c) Height upto 5m vide R.C.D. S.O.R. 14.01D-(ii)p
Construction of precast RCC railing of M30 Grade, aggregate size not exceeding 12 mm, true to line and grade, tolurence of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications. vide R.C.D. S.O.R. 14.06
Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.) vide R.C.D. S.O.R. 14.21
Back filling behind abutment, wing wall, return wall complete as per drawing and technical specifications (A)Granular Material vide R.C.D. S.O.R.13.09(A)
Confirmatory Boring through Core drilling of BX (41mm to 59mm) size by rotary core drilling machine upto 20.0 m depth in all kinds of hard rock including finishing, maintenance of core (minimum 80% core recovery in hard rock is essential and sludge for foundation exploration complete as per spn. and direction of E/I As per DPR
Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications vide R.C.D. S.O.R. 13.01
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications PCC Grade M20 vide R.C.D. S.O.R. 13.5 B (p)
Providing and laying Flooring complete as per drawing and Technical specifications laid over cement concrete bedding. (A)Rubble stone laid in cement mortar 1:3 vide R.C.D. S.O.R. 16.08A
Flexible Apron :Construction of flexible apron 1 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall. vide R.C.D. S.O.R. 16.11
Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and technical specifications vide R.C.D. S.O.R. 12.42
Reinforced Cement Concrete Crash Barrier (Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with Reinforced Cement Concrete with HYSD reinforcement conforming to MoRT&H specification and as per details given IRC-5 (Fig.-5, b) including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board etc., as per approved drawing and at locations directed by the Engineer, all as specified. (Area- 0.243 sqm./meter, single face) (i) M 25 grade concrete vide R.C.D. S.O.R. 8.22 (i)
Crash Barriers for Bridge(Provision of an Reinforced cement concrete crash barrier at the bridge decks& approaches to bridge structures constructed with Rein forced Cement Concrete With HYSD reinforcement confirming MoRT&H Specification and as per details given IRC-5 including dowel bars ,expansion joints filled with pre-moulded asphalt filler board etc.. and approved drawing and at locations directed by the Engineer ,all as specified .) (B)Crash Barriers for Bridge (Height 1100 mm) as per detais given IRC-5 (fig.-2 ) (Area -0.298 sqm. For 1 meter length ) vide R.C.D. S.O.R. 14.15(B)
Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specifications vide R.C.D. S.O.R. 13.08
Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification. vide R.C.D. S.O.R. 13.10
Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications. vide R.C.D. S.O.R. 14.18 (iii)
Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6% bitumen by weight vide R.C.D. S.O.R. 14.18 (iv)
Numbering and writing the culvert no. etc. As per DPR
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications for Diversion Road PCC Grade M15 Height upto 5m vide R.C.D. S.O.R. 13.5 A (p)
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. vide R.C.D. S.O.R. 16.01
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications. PCC Grade M15 (I)PCC Grade M15 using batching plant & Concrete pump vide R.C.D. S.O.R. 12.8 A(I)
Plain/Reinforced cement concrete in sub-structure complete as per drawing and technical specifications Triple Cell Box Culvert RCC Grade M25 Height upto 5m RCC Grade M25 using batching plant, transit mixer & concrete pump vide R.C.D S.O.R. 13.05 F (p) Case I
Providing Tar Phelt Cushion under the deck slab culverts As per DPR
Laying Reinforced Cement Concrete Pipe NP4/prestrssed concrete pipe on first class bedding in single row . (Laying Reinforced cement concrete pipe NP4/prestrssed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . ) 1200 mm dia vide R.C.D. S.O.R. 9.04B
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications by stone Boulder. vide R.C.D. S.O.R. 16.04A
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification vide R.C.D. S.O.R. 16.05
Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical specifications vide N.H.S.O.R. 13.3
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and Technical Specifications Random Rubble Masonry vide R.C.D. S.O.R. 13.04 A
Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification RCC Grade M25 Using Batching Plant, Transit Mixer and Concrete Pump For solid slab super-structure, 20-30 per cent of (a+b+c) (p) Height upto 5m vide R.C.D. S.O.R. 14.01Bi(p)
Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification Random Rubble Masonry vide R.C.D. S.O.R. 12.7 (b)
Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications vide R.C.D. S.O.R. 13.06
Add 18% GST :
Add 1% Labour Cess:
MANOJ KUMAR SINGH
ANAND CONSTRUCTION INFRASTRUCTURE PVT LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid