PROVN OF 3X TOILET BLOCKS AT PT GROUND, TRG AREA AND MT PARK OF 2 GREND AND PROVN OF ONE ADNL TOILET FOR OFFRS AT ADM BLOCK OF 4 JAK UNDER GE (S) JAIPUR

Amount

06/LBW/61SA/Q3W/2020-21 (B/R) : Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep in soft/loose soil and getting out.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil. 06/LBW/61SA/2020-21/Q3W-169 57/Rev/61SA/2020-21/Q3W-10

M/L Cement concrete in foundations filling and mass concrete type D-2 1:4:8 ( 40 mm graded aggregates). 06/LBW/61SA/2020-21/Q3W-12.50 57/Rev/61SA/2020-21/Q3W-0.50

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm soft / loose soil. 06/LBW/61SA/2020-21/Q3W-47 57/Rev/61SA/2020-21/Q3W-05

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point . 06/LBW/61SA/2020-21/Q3W-94 57/Rev/61SA/2020-21/Q3W-05

Earth Filling under floors including spreading,watering and levelling in layers n exc. 25 cm thick complete(Note : The earth obtained from item No.2 shall be used for filling under)

M/Lfor brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6. 06/LBW/61SA/2020-21/Q3W-100 57/Rev/61SA/2020-21/Q3W-8.30

M/Lfor brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4

M/Lfor PCC 1:2:4 type B1 (12.5 mm graded stone aggregate for damp proof course,40 mm thick to horizontal or vertical surfaces including necessary formwork

M/L Providing reinforced cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates as directed . 06/LBW/61SA/2020-21/Q3W-1.50 57/Rev/61SA/2020-21/Q3W-.15

M/L for RCC 1:2:4 type BI (20 mm graded stone aggregate) nominal mix in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like. 06/LBW/61SA/2020-21/Q3W-16 57/Rev/61SA/2020-21/Q3W-1.5

M/L for RCC 1:2:4 type BI (20 mm graded stone aggregate) nominal mix in chajja

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat. 06/LBW/61SA/2020-21/Q3W-74 57/Rev/61SA/2020-21/Q3W-9

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges for flat

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizintal or sloping and similar work exc 10cm but n exc 20cm wide, 06/LBW/61SA/2020-21/Q3W-55 57/Rev/61SA/2020-21/Q3W-12

S/F mild steel bars TMT steel bars 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to. 06/LBW/61SA/2020-21/Q3W-1100 57/Rev/61SA/2020-21/Q3W-125

S/F mild steel bars TMT steel bars 6mm to 8 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for coh, .nns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conferming to. 0 6/LBW/61SA/2020-21/Q3W-900 57/Rev/61SA/2020-21/Q3W-75

All as per item No 17 above but 5 mm over upto and including 10 mm dia in stirrups, spacers and binders.to 8 mm dia , qualtiy conforming to. 06/LBW/61SA/2020-21/Q3W-150 57/Rev/61SA/2020-21/Q3W-50

S/F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing

S/F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S/F steel ventilators with top hung shutter including hinges,steel peg stay, complete

M/L preparing new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of zink chrome primer

S/Fbutt hinges, medium weight cold rolled mold steel, siz 100mm. 06/LBW/61SA/2020-21/Q3W-18 57/Rev/61SA/2020-21/Q3W-03

S/F aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm. 06/LBW/61SA/2020-21/Q3W-12 57/Rev/61SA/2020-21/Q3W-02

S/F extruded aluminium alloy handles, fabricated type., anodised,150 mm

M/L rendering 15mm thick on stone surface or other than fair faces of brick surfaces in CM 1:4 surface finished even and smooth without using extra cement. 06/LBW/61SA/2020-21/Q3W-335 57/Rev/61SA/2020-21/Q3W-25

M/L rendering 5 mm thick on ceiling in CM(1:3) finished even and smooth without using extra cement. 06/LBW/61SA/2020-21/Q3W-120 57/Rev/61SA/2020-21/Q3W-05

M&L Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set over 15mm thick screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L Glazed ceramic coloured tiles ( 450 x 350 mm) x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match : white tiles

S/F Glazed ceramic coloured tiles border decorative fancy size, 7 mm thick, on vertical serfaces such as skirting, dados and risers to staprs etc. set and jointed in neat cement slurry in designer pattern and pointed in white or coloured cement to match tiles including rendering 10mm thick in Cm 1;4

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement. 06/LBW/61SA/2020-21/Q3W-135 57/Rev/61SA/2020-21/Q3W-20

M/L 75 mm thick Cement Concrete in sub base of floors type D-2, PCC 1:4:8 ( 40mmgraded aggregate )

M/L preparing new plastered surfaces and applying three coats of white wash on walls

M/L preparing new plastered surfaces and applying three coats of white wash ceiling. 06/LBW/61SA/2020-21/Q3W-13.50 57/Rev/61SA/2020-21/Q3W-5

M/L preparing new plastered surfaces and applying two coats of cement base paint on wall. 06/LBW/61SA/2020-21/Q3W-135 57/Rev/61SA/2020-21/Q3W-09

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,100mm bore sand cast pipe

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,75 mm bore sand cast pipe

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints,fix to wall,100mm bore sand cast pipe. Note: Stack clamps shall be measured and paid seperately. 06/LBW/61SA/2020-21/Q3W-12 57/Rev/61SA/2020-21/Q3W-06

S/F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall,75 mm bore sand cast pipe. Note: Stack clamps shall be measured and paid seperately. 06/LBW/61SA/2020-21/Q3W-12 57/Rev/61SA/2020-21/Q3W-06

S/F CI Bend 100 mm dia. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

S/F CI Bend 75 mm dia. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

S/F CI 'T' junction 100 mm dia,single. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

S/F CI 'T' junction 75 mm dia,single. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

S/F Cast Iron soil cowl100 mm dia. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

S/F Cast Iron soil cowl 75 mm dia

M/LCast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) 75 mm dia

M/L Salt-glazed stoneware gully traps, square or round mouthed, type `P',100x100mm

S/F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 100 mm pipe. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-02

S/F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roo for 75 mm pipe. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-02

S/F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete

S/F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)

S/F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including PVC pipe (excluding flushing cistern, flush pipe and waste pipe).

M&LTubes 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 15mm bore. 06/LBW/61SA/2020-21/Q3W-45 57/Rev/61SA/2020-21/Q3W-10

M&L Tubes, medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, 20mm bore

S/F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I - Capacity 750 Litre

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-05

S/F 15 mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete.

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed - 15mm

S/F stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and 20mm

Supply & fixing Vireous China valveless, syphonic action type, flushing cisten low level, white, with inlet, ball valve,float and handle including brackets capacity 10 ltr

S/F PVC connections 15mm size with PTMT nuts of length 300mm

S/F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed- 20mm

M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder:

M&L plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in plinth protections 50 mm thick finished even and smooth w/o using extra cement with joints 10 mm wide and in full depth at corners and @ 3 metre c/c filled with mastic mortar

M&L Providing cement concrete 1:2:4 type B1 in roof kerbs or mud stop rounded or chamfered

M&L Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore. 06/LBW/61SA/2020-21/Q3W-150 57/Rev/61SA/2020-21/Q3W-14

M&L Reinforced concrete NP2 drain pipe 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately). 06/LBW/61SA/2020-21/Q3W-170 57/Rev/61SA/2020-21/Q3W-16

M&L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement.

M&L for PCC 1:2:4 type B-1 (20mm graded stone aggregate) as in surface channels and drains all as specified. 06/LBW/61SA/2020-21/Q3W-01 57/Rev/61SA/2020-21/Q3W-0.10

Extra forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified. 06/LBW/61SA/2020-21/Q3W-10 57/Rev/61SA/2020-21/Q3W-1.50

Add or deduct from this item is only for adjustment of rate item No 70 as above for each 25mm girth of part of thereof over 30mm

M/L Providing cement concrete in lintels upto 1.5 m clear span, cills, steps: seismic and other similar bands, plinth courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, appex 1:2:4 type B-1( 20 mm graded aggregates)stones, bed plates as directed. 06/LBW/61SA/2020-21/Q3W-1 57/Rev/61SA/2020-21/Q3W-0.10

M/L for sand stone slabs on manhole covers ,landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and in cement mortar 1:4, complete,5 cm thick. 06/LBW/61SA/2020-21/Q3W-10 57/Rev/61SA/2020-21/Q3W-02

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (150 mm) bore. 06/LBW/61SA/2020-21/Q3W-03 57/Rev/61SA/2020-21/Q3W-01

Excavation over area n.exc 1.50m deep and getting out in soft /loose soil

Excavation over area .exc 1.50m deep and n. Exc 3.0m deep and getting out in soft /loose soil

Excavation over area .exc 3.0m deep and n. Exc 4.5m deep and getting out in soft /loose soil

M&L for precast RCC 1:2:4 type B1 using 20 mm graded stone aggregate for manhole cover including placing & set in CM 1:6 all as specified Including demolition of old RCC manhole covers. Note :- Reinforcement shall be measured and paid for separately.

M&L for formwork to edges of concrete flats, roofs, floors etc not exc 10cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc 10cm wide for fair finished surfaces.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm tickness , M-35 grade, set, jointed over 25 mm thick sand cushoning all as directed by Engineer-in-Charge.

M&L providing pre cast cement concrete block or slab 150mm thick 1:2:4 type B1 using 20mm graded stone aggregate with plain or inter locking joints as directed set in CM 1:6. kerbing/edge block to hard standing/footh including necessary earth work.

57/Rev/61SA/2020-21/Q3W: M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls all as specified & directed by Engineer-in-Charge

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement.

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions.and finally applying one coat of Bitumen coat @ 1.2 Kg/Sqm over APP Membrane before application of Aluminium paint

M&L one coat of silver paint over APP Membrane all as specified and directed by Engineer -in - chage

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks & removing to store

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair

M&L 25 mm bore for galvanised iron water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embaded portion of holdfast n. exc half brick

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections or . aluminium alloy.

S&F Aluminium handles 125 mm size, . type, anodised

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed.

S&F of CP pressure JET for EWC including flexible pipe for 15 mmdia bore

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement

Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws(Make-CERA CAT PART NO CA 106 or equivalent of MARC, JAQUAR)

M/L for Fancy type MS bracket suitable for curtain rod

M&L 20 mm dia Drapery Fancy type curtain rod

M/L for caps/ side Bulbs PVC suitable for curtain rod

M&L Aluminium anodised Door shutter sliding/openable type with aluminium section weighing 0.55 Kg / Mtr incl. necessary joining, cleats, glazing clips, rubber packing anodised aluminium snap beading & screws etc complete all as specified

M&L Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Sheet glass 5.5mm thick, ordinary quality in square as required & directed by Engr - in - Charge

S&F frosted glass 5.0mm thick, pin head type & glazing with oil putty in squares exc 0.5 sq.m in each pane

S&F Coloured Glazed ceramic tilessize 300x450mm x 7mm thick edge cut/ joint free , on walls etc. set & jointed in neat cement slurry & pointed in white/coloured cement to match over 15mm thick plaster in CM(1:4)

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed in CM(1:4)

S&F bathroom Glass corner of best quality (as per sample approved)

M&L CP cast copper alloy bib taps two way with wall flange and areator fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 606or equivalent of MARC, JAQUAR) fixed in repair.

S&F in repairs elegent mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm all as specified (Make : Paryag/ Commander)

S&F Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-CERA CAT PART NO CA 104or equivalent of MARC, JAQUAR) fixed in repair

S&F Soap dish brass CP ((Make-CERA CAT PART NO CA 103 or equivalent of MARC, JAQUAR) fixed in repair

S/F brass CP Angle stop cock fancy type concealled type long body,15 mm bore

M&L CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn (Make-CERA CAT PART NO CQ 615 or equivalent of MARC, JAQUAR)

M&L CP wall Mixer with flange & 115 mm long bend pipe forover head shower non Telephonictype with connecting legs wall flanges and crutch etc quarter turn ( Make-CERA CAT PART NO CQ 612 or equivalent of MARC, JAQUAR) 15mm bore for mixing hot & cold water

M&L Towel ring of brass CP Squar flange (Make-CERA CAT PART NO CQ 102 or equivalent of MARC, JAQUAR)

M&L Chromium plated Overhead Rain shower with relvoling joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour (Make-CERA CAT PART NO CP 140 or equivalent of MARC, JAQUAR)

M&L CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 604 or equivalent of MARC, JAQUAR)

S&F Vitreous China wash hand basin (counter type) including half pedastal CERA Part No 1071 CYRCSS white/coloured, size 610x560mm including CP waste coupling but excluding taps, waste chain & plug & (Make-CERA CAT PART NO1071 or equivalent of , HINDWARE/ PARRY WARE )

S&F vitreous china wash down water closet pan, white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete Make-EWC HINDWARE CAT PART NO 20053 TULIF or equivalent& CISTEREN HINDWARE CAT PART NO 21036 or equilant )

S&F PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge. Make - PRAYAG/SIMET

S&F Bottle trap of PTMT having minimum water seal of 25mm (Minimum weight 32mm-260gms/40mm-270 gms) (Make-CERA CAT PART NO1071 or equivalent of , HINDWARE/ PARRY WARE)

M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types as in WHB Counter all as specified and directed by Eng in charge

M & L for wooden cabinet (Openable shutters) below wash hand basin counter all as specified and directed by engineer in charge

06/LBW/61SA/Q3W/2020-21 (E/M):M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in and including casing caping 25 mm wide medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings Make- Havells(std)/Bonton/Polycab/HPL

One light/fan/ bell point controlled by one, one way switch. 6/ LBW - 30 57/Rev - 3

One 3 pin 5 Amp socket outlet on independent board with other switches. 6/ LBW - 6 57/Rev - 2

All as per Item No 122 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 6/ LBW - 3 57/Rev - 1

S&F switch, piano type 230/250 volts (Make ; Anchor or equivelent model in kinjal/bajaj/Phillips)

Single pole, one way 5 Amp rating 6/ LBW - 36 57/Rev - 5

Single pole, one way 15 Amp rating. 6/ LBW - 3 57/Rev - 1

S&F Socket, piano type 230/250 volts :- make: Anchor/kinjal/bajaj

Socket 05 Amp rating Make- Anchor Cat pt No-14304. 6/ LBW - 6 57/Rev - 2

Socket 15 Amp rating. 6/ LBW - 3 57/Rev - 1

M&L Ceiling rose surface bakelite 65x50mm, three terminals.Make Anchor/Legrand/Crabtree. 6/ LBW - 16 57/Rev - 3

Supply & fixing lamp holder PVC body complete all as specified and directed with 01xLED bulb 9 watt

Supply & fix Exhaust fan 300 mm sweep complete all as specified and directed. 6/ LBW - 6 57/Rev - 1

Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivelent model in Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture

S&F in repair factory made, sheet distribution boards, SP&N8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar. 6/LBW -3 57/Rev - 1

S&Fin repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps. 6/ LBW - 12 57/Rev - 2

SPN 32 to 63 amps. 6/ LBW - 3 57/Rev - 1

M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover.

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge

M & L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 16 sqmm, 2 core .

S&F in LED building security light 45 watt complete with mirror optic and fixed in GI bracket 40 mm bore with suitble size clamps, nuts and bolts all as specified and directed. Make Crompton Cat No : LSTP-45-CDL or equivalent in Havells, syska, bajaj

Supply & fix BATTEN, LED Light fittings 1 x 20 W, 240 volt (size - 4 feet/1136mm) long life, surface/wall mounting IP 20, luminaire per watt (Minium)extruded alluminium housing with frosted PMMA diffuser with high brightness LESs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Siska CAT part No. SSK -T5-22W or equivelent model in Bajaj/Wipro/Philips/CG/Surya Roshni.

Supply & Fixing mirror surface decorative wall mounted , SS finish fixture with opal glass diffuser suitable for 10 watt LED lamp warm white lamp complete all as specified and directed. Make : Havells Cat No. LHJE022006499 or equivelent in Bajaj/C&G/Wipro.

M&L for sub main wiring with two runs of 4 Sqmm single core FRLS PVC insulated but in unsheathed multi stranded copper conductor cable 1100 volts grade drawn through and including of 25mm dia PVC rigid conduit medium with conduit accessories and fixed to the surface of wall/ceiling as per ISI including 4.0 Sqmm PVC insulated copper conductor earth continuity wire.

S.R.Enterprises

M/S JALANDRA CONSTRUCTIONS