Construction of different RKVY Units, Poly houses, compost unit, Development of tissue culture lab, vehicle parking and training hall, hybridization f

Bill of Quantity

Sl No. DSR2021 Description of Items unit Quantity Rate DSR Non DSR

1 1.1.2.2 Carriage of Earth By Mechanical Transport including loading,unloading cum 7875.00 203.98 16,06,342.50

and stacking upto 2km

2 2.6.1 Earth work in excavation by mechanical means (Hydraulic cum 13308.45 205.45 27,34,221.39

excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in

width as well as 10 sqm on plan) including getting out and disposal of

excavated earth lead upto 50 m and lift upto 1.5 m, as directed by

Engineer-in-charge.

All Kind of Soil

3 2.7.3 Earth work in excavation by mechanical means (Hydraulic excavator)/ cum 122.89 1,184.30 1,45,537.27

manual means over areas (exceeding 30 cm in depth, 1.5 m in width as

well as 10 sqm on plan) including getting out and disposal of excavated

earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-

Hard rock (blasting prohibited)

4 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, cum 1723.08 253.95 4,37,577.13

sides of foundations etc. in layers not exceeding 20cm in depth,

consolidating each deposited layer by ramming and watering, lead up

to 50 m and lift upto 1.5 m.

5 2.31 Clearing jungle including uprooting of rank vegetation, grass, brush sqm 16135.00 14.50 2,33,957.50

wood, trees and saplings of girth up to 30 cm measured at a height of 1 m

above ground level and removal of rubbish up to a distance of 50 m

outside the periphery of the area cleared.

6 2.28.1 Surface dressing of the ground including removing vegetation and sqm 1001.80 28.15 28,200.67

inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to

50 m and lift up to 1.5 m.

All kinds of soil

7 4.1.8 Providing and laying in position cement concrete of specified grade cum 613.56 6,326.05 38,81,407.13

excluding the cost of centering and shuttering -

All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40

mm nominal size)

8 4.1.2 Providing and laying in position cement concrete of specified grade cum 264.79 7,783.65 20,61,032.68

excluding the cost of centering and shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone

aggregate 20 mm nominal size)

9 5.9.1 Centering and shuttering including strutting, propping etc. and removal of sqm 5819.33 307.95 17,92,061.44

Foundations, footings, bases of columns, etc. for mass concrete

10 5.9.2 Centering and shuttering including strutting, propping etc. and removal of sqm 760.08 669.55 5,08,911.56

Walls (any thickness) including attached pilasters, butteresses,

plinth and string courses etc.

11 5.9.3 Centering and shuttering including strutting, propping etc. and removal of sqm 1290.00 766.55 9,88,849.50

Suspended floors, roofs, landings, balconies and access platform

12 5.9.5 Centering and shuttering including strutting, propping etc. and removal of sqm 280.80 608.35 1,70,824.68

Lintels, beams, plinth beams, girders, bressumers and cantilevers

13 5.9.6 Centering and shuttering including strutting, propping etc. and removal of sqm 388.20 804.25 3,12,209.85

Columns, Pillars, Piers, Abutments, Posts and Struts

14 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, kg 41043.64 89.65 36,79,562.33

bending, placing in position and binding all complete upto plinth level .

Thermo-Mechanically Treated bars of grade Fe-500D or more.

15 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, kg 41649.68 89.65 37,33,894.17

bending, placing in position and binding all complete above plinth level .

Thermo-Mechanically Treated bars of grade Fe-500D or more.

16 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cum 410.44 7,997.30 32,82,383.02

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting

of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete.

All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Note: Extra cement up to 10% of the minimum specified cement content

in design mix shall be payable separately. In case the cement content

in design mix is more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-design the mix

or bear the cost of extra cement.

17 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cum 347.08 10,080.15 34,98,625.52

cement concrete for reinforced cement concrete work; using coarse

aggregate and fine aggregate derived from natural sources, Portland

Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard setting

of concrete, to improve durability and workability without impairing

strength; including pumping of concrete to site of laying, curing, carriage

for all leads; but excluding the cost of centering, shuttering, finishing and

reinforcement as per direction of the engineer-in-charge; for the following

grades of concrete.

All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Note: Extra cement up to 10% of the minimum specified cement content

in design mix shall be payable separately. In case the cement content

in design mix is more than 110% of the specified minimum cement

content, the contractor shall have discretion to either re-design the mix

or bear the cost of extra cement.

18 5.35 Add for using extra cement in the items of design mix over and above quintal 25.00 688.45 17,209.92

the specified cement content therein.

19 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class cum 241.08 6,658.25 16,05,175.10

designation 7.5 in foundation and plinth in:

Cement mortar 1:6 (1 cement : 6 coarse sand)

20 6.4.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class cum 497.14 8,288.35 41,20,486.90

designation 7.5 in superstructure above plinth level up to floor V level in

all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

21 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks sqm 271.00 1,018.05 2,75,892.36

of class designation 7.5 in superstructure above plinth level up to floor

Cement mortar 1:4 (1 cement :4 coarse sand)

22 7.1.1 Random rubble masonry with hard stone in foundation and plinth cum 30.00 6,653.45 1,99,603.50

including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse

sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level

Cement mortar 1:6 (1 cement : 6 coarse sand)

23 7.2.1 Random rubble masonry with hard stone in superstructure above plinth cum 93.75 8,275.70 7,75,846.88

level and upto floor five level, including leveling up with cement concrete

1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm

nominal size) at window sills, ceiling level and the like.

Cement mortar 1:6 (1 cement : 6 coarse sand)

24 9.1.1 Providing wood work in frames of doors, windows, clerestory windows cum 1.56 1,31,576.95 2,05,260.04

and other frames, wrought framed and fixed in position with hold fast

lugs or with dash fasteners of required dia & length (hold fast lugs or

dash fastener shall be paid for separately).

Second class teak wood

25 13.106 Painting (one or more coats) with black Japan paint of approved sqm 19.50 78.60 1,532.70

brand and manufacture to give an even shade.

26 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : sqm 63.00 2,015.75 1,26,992.25

2202 (Part I) non-decorative type, core of block board construction with

frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on both

faces of shutters:

35 mm thick including ISI marked Stainless Steel butt hinges

with necessary screws

27 9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / sqm 126.00 764.00 96,264.00

wood grain in gloss / matt/ suede finish with high density protective

surface layer and reverse side of adhesive bonding quality conforming

to IS : 2046 Type S, including cost of adhesive of approved quality.

28 9.40.1.2 Providing and fixing wooden moulded beading to door and window frames metre 156.00 239.20 37,315.20

with iron screws, plugs and priming coat on unexposed surface etc.

2nd class teak wood

29 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to each 60.00 194.35 11,661.00

frame with 10 mm diameter bolts, nuts and wooden plugs and embedding

in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse

sand : 6 graded stone aggregate 20mm nominal size).

30 10.27.3 Providing and fixing carbon steel galvanised ( minimum coating 5 micron) each 60.00 144.60 8,676.00

dash fastener of 10 mm dia double threaded 6.8 grade (yield strength

480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide

PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry,

etc. as per direction of Engineer-in-charge.

31 9.82 Providing and fixing bright finished brass hanging type floor door stopper each 30.00 109.60 3,288.00

with necessary screws, etc. complete.

32 9.84 Providing and fixing aluminium extruded section body tubular type each 30.00 856.30 25,689.00

universal hydraulic door closer (having brand logo with ISi, IS : 3564,

embossed on the body, door weight upto 36 kg to 80 kg and door width

from 701 mm to 1000 mm), with double speed adjustment with necessary

accessories and screws etc. complete.

33 9.62.1 Providing and fixing ISI marked oxidised M.S. sliding door bolts with each 30.00 180.55 5,416.50

nuts and screws etc. complete :

34 9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, each 30.00 74.65 2,239.50

(Barrel type) with necessary screws etc. complete :

35 9.59.1 Providing and fixing ISI marked oxidised M.S. single acting spring hinges each 30.00 251.70 7,551.00

with necessary screws etc. complete :

36 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows kg 900.00 181.00 1,62,900.00

etc. with M.S. flats, square or round bars etc. including priming coat

with approved steel primer all complete.

Fixed to steel windows by welding

37 21.1.1.2 Providing and fixing aluminium work for doors, windows, ventilators kg 240.00 466.30 1,11,912.00

and partitions with extruded built up standard tubular sections/

appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of

required dia and size, including necessary filling up the gaps at

junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free,

straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / paneling, C.P.

brass / stainless steel screws, all complete as per architectural

drawings and the directions of Engineer-in-charge. (Glazing, paneling

and dash fasteners to be paid for separately) :

For fixed portion

Powder coated aluminium (minimum thickness of powder coating 50

38 21.1.2.2 For shutters of doors, windows & ventilators including kg 360.00 564.80 2,03,328.00

providing and fixing hinges/ pivots and making provision

for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50

39 21.3.2 Providing and fixing glazing in aluminium door, window, ventilator sqm 180.00 1,325.55 2,38,599.00

shutters and partitions etc. with EPDM rubber / neoprene gasket

etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid

in basic item):

With float glass panes of 5 mm thickness (weight not

less than 12.50 kg/sqm)

40 21.8.1 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ metre 180.00 85.25 15,345.00

Stone work by providing weather silicon sealant over backer rod of

approved quality as per architectural drawings and direction of

Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

41 21.15.2 Providing and fixing aluminium casement windows fastener of required each 60.00 79.75 4,785.00

length for aluminium windows with necessary screws etc. complete.

Powder coated minimum thickness 50 micron aluminium

42 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to sqm 120.00 1,051.75 1,26,210.00

windows and clerestory windows using wire gauge with average width of

aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

With 12 mm mild steel U beading

43 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow kg 250 612.25 1,53,062.50

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners , stainless

steel bolts etc., of required size, on the top of the floor or the side of waist

slab with suitable arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall be

considered excluding fixing accessories such as nuts, bolts, fasteners

44 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes kg 29244.00 154.90 45,29,895.60

etc.) trusses etc., including cutting, hoisting, fixing in position and applying

a priming coat of approved steel primer, including welding and bolted with

special shaped washers etc. complete.

Hot finished welded type tubes

45 11.5 62 mm thick cement concrete flooring with concrete hardener topping, sqm 50.00 928.65 46,432.50

under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand

: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick

cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded

stone aggregate, 6mm nominal size) by volume, hardening compound

mixed @ 2 litre per 50 kg of cement or as per manufacture’s

specifications. This includes cost of cement slurry, but excluding the cost

of nosing of steps etc. complete.

46 11.26.1 Kota stone slab flooring over 20 mm (average) thick base laid over and sqm 577.00 1,706.60 9,84,708.20

jointed with grey cement slurry mixed with pigment to match the shade of

the slab, including rubbing and polishing complete with base of cement

mortar 1 : 4 (1 cement : 4 coarse sand) :

47 11.27 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and sqm 23.50 2,038.55 47,905.93

pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3

coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of the slabs, including rubbing and polishing complete.

48 11.31 Extra for pre finished nosing in treads of steps of Kota stone/ sand metre 90.00 157.35 14,161.50

49 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: sqm 252.00 1,063.45 2,67,989.40

15622 (thickness to be specified by the manufacturer), of approved make,

in all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados,

over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm, including pointing

in white cement mixed with pigment of matching shade complete.

50 11.37A Providing and fixing 1st quality ceramic glazed floor tiles conforming to sqm 90.00 938.50 84,465.00

IS : 15622 (thickness to be specified by the manufacturer ) of approved

make in all colours, shades except burgundy, bottle green, black of any

size as approved by Engineer-in-Charge in skirting, risers of steps and

dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm

including pointing in white cement mixed with pigment of matching shade

51 11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be sqm 510.00 1,416.65 7,22,491.50

specified by the manufacturer) with water absorption less than 0.08%

and conforming to IS: 15622, of approved make, in all colours and

shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting

the joints with white cement and matching pigments etc., complete.

Size of Tile 600x600 mm

52 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be sqm 51.00 1,466.50 74,791.50

specified by manufacturer), with water absorption less than 0.08 % and

conforming to I.S. 15622, of approved make, in all colours & shade, in

skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1

cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments

Size of Tile 600x600 mm

53 12.1.2 Providing corrugated G.S. sheet roofing including vertical / curved surface sqm 1987.50 1,135.45 22,56,706.88

fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with

bitumen and G.I. limpet washers or with G.I. limpet washers filled with

white lead, including a coat of approved steel primer and two coats of

approved paint on overlapping of sheets complete (up to any pitch in

horizontal/ vertical or curved surfaces), excluding the cost of purlins,

rafters and trusses and including cutting to size and shape wherever

0.80 mm thick with zinc coating not less than 275 gm/m²

54 12.52.3 Providing and fixing tiled false ceiling of specified materials of size sqm 54.00 1,948.95 1,05,243.30

595x595 mm in true horizontal level, suspended on inter locking metal

grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/

sqm, both side inclusive) consisting of main "T" runner with suitably

spaced joints to get required length and of size 24x38 mm made from

0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center

and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet,

1200 mm long spaced between main "T" at 600 mm center to center to

form a grid of 1200x600 12.5 mm thick square edge PVC Laminated

Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard,

manufactured from natural gypsum as per IS 2095 part I and laminated

with white 0.16mm thick fire retardant PVC film on the face side and

12micron metalized polyester on the back side with all edges sealed with

the face side PVC film which goes around and wraps the edges and is

bonded to the edges and the back side metalized polyester film so as to

make the tile a completely sealed unit.

55 13.1.1 12 mm cement plaster of mix : sqm 1883.00 294.85 5,55,202.55

1:4 (1 cement: 4 fine sand)

56 13.12 18 mm cement plaster in two coats under layer 12 mm thick cement sqm 1006.30 461.85 4,64,759.66

plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with

57 13.15 20 mm cement plaster 1:2 (1 cement : 2 stone dust). sqm 300.00 450.30 1,35,090.00

58 13.16.1 6 mm cement plaster of mix : sqm 1310.00 253.05 3,31,495.50

1:3 (1 cement : 3 fine sand)

59 13.80 Providing and applying white cement based putty of average thickness sqm 3696.15 123.85 4,57,768.18

1 mm, of approved brand and manufacturer, over the plastered wall

surface to prepare the surface even and smooth complete.

60 13.41.1 Distempering with oil bound washable distemper of approved brand and sqm 15965.00 162.55 25,95,110.75

manufacture to give an even shade :

New work (two or more coats) over and including water thinnable priming

coat with cement primer

61 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : sqm 10363.00 166.85 17,29,066.55

New work (Two or more coat applied @ 1.67 ltr/10 sqm

over and including priming coat of exterior primer applied

62 13.61.1 Painting with synthetic enamel paint of approved brand and sqm 438.66 131.45 57,661.86

manufacture to give an even shade :

Two or more coats on new work

63 16.8.1 Brick edging laid lengthwise with half brick depth including excavation, metre 312.00 49.90 15,568.80

refilling and disposal of surplus earth lead upto 50 metres :

With common burnt clay F.P.S. (non modular) bricks of

class designation 7.5

64 16.71 Providing and fixing G.I. chain link fabric fencing of required width in mesh sqm 250.00 971.90 2,42,975.00

size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with

2 mm dia wire or nuts, bolts and washers as required complete as per the

direction of Engineer-in-charge.

65 16.68 Providing and laying 60mm thick faciory made cement concrete sqm 1712.00 951.00 16,28,112.00

interlocking paver block of M -30 grade made by block making machine

with strong vibratory compaction, of approved s;ze, design & shape, laid

in required colour and pattern over and including 50mm thick compacted

bed of coarse sand, filling the joints with line sand etc. all complete as per

the direction of Engineer-in-charge.

66 0052 Front end loader 1 cum bucket capacity (incl POL) hour 350 1,300.00 4,55,000.00

68 16.1 Preparation and consolidation of sub grade with power road roller of sqm 2,951.00 180.50 5,32,655.50

8 to 12 tonne capacity after excavating earth to an average of 22.5

cm depth, dressing to camber and consolidating with road roller

including making good the undulations etc. and re-rolling the sub

grade and disposal of surplus earthwith lead upto 50 metres.

69 16.31.1.1 Providing and applying tack coat using bitumen emulsion conforming Sqm 2,681.75 11.60 31,108.30

to IS:8887, using emulsion pressure distributer including preparing

the surface & cleaning with mechanical broom.

With rapid setting bitumen emulsion

On W.B.M / W.M.M. @ 0.4kg/sqm

70 16.31.1.2 Providing and applying tack coat using bitumen emulsion conforming Sqm 2,412.50 7.90 19,058.75

to IS:8887, using emulsion pressure distributer including preparing

the surface & cleaning with mechanical broom.

With rapid setting bitumen emulsion

On bituminous surface @ 0.25kg/sqm

71 16.55.1 Providing and laying bituminous macadam using crushed stone Cum 180.94 7,756.40 14,03,423.63

aggregates of specified grading premixed with bituminous binder,

transported to site by tippers, laid over a previously prepared surface

with paver finisher equiped with electronic sensor to the required

grade, level and alignment and rolling with smooth wheeled, vibratory

and tandem rollers as per specifications to achieve the desired

compaction and density, complete

50 to 100 mm average compacted thickness with bitumen

of grade VG-30 @ 3.50% (percentage by weight of total

mix) prepared in Batch Type Hot Mix Plant of 100-120

TPH capacity.as per specificatons and directions

of Engineer-in-Charge.

72 16.79 Providing, laying, spreading and compacting graded stone aggregate Cum 536.35 2,803.65 15,03,737.68

(size range 53 mm to 0.075 mm ) to wet mix macadam (WMM)

specification including premixing the material with water at OMC in

for all leads & lifts, laying in uniform layers with mechanical

paverfinisher in sub- base / base course on well prepared surface

and compacting with vibratory roller of 8 to 10 tonne capacity to

achievethe desired density, complete as per specifications and

directions of Engineer-in-Charge.

73 16.56.2 Providing and laying semi- dense Bituminous concrete using crushed sqm 7,065.00 247.35 17,47,527.75

stone aggregates of specified grading, premixed with bituminous

binder and filler, transporting the hot mix to work site by tippers,

laying with paver finisher equiped with electronic sensor to the required

grade, level and alignment and rolling with smooth wheeled, vibratory

and tandem rollers to achieve the desired compaction and density

as per specification, complete and as per directions of Engineer-

25 mm compacted thickness with bitumen of grade VG 30 @ 5%

(percentage by weight of total mix) and lime

filler @ 2% (percentage by weight of Aggregate) prepared

in Drum Type Hot Mix Plant of 60-90 TPH capacity.

74 NS1 Supplying and fixing polycarbonate multiwall 15mm sheet complete as sqm 545.14 1,380.80 7,52,726.55

per direction of EIC.

75 NS2 Extra for cutting, levelling, grading, watering for available earth in field in sqm 6225.00 23.26 1,44,793.50

desired slope in all respect as per direction of EIC.

Total of civil works 608,48,553.43 8,97,520.05

75 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ) Each 2 5781.35 11562.70

with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever) conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

76 17.2.1 Providing and fixing white vitreous china pedestal type water closet Each 8 5540.55 44324.40

(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C.

flushing cistern, including flush pipe, with manually controlled device

(handle lever), conforming to IS : 7231, with all fittings and fixtures

complete, including cutting and making good the walls and floors

wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

77 17.16A Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1meter Each 8 299.35 2394.80

long with S.S. Triangular plate to european type W.C. Of approved quality

and make as approved by engineer in charge.

78 17.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT Each 9 2521.85 22696.65

pillar cock, 32 mm PTMT waste coupling of standard pattern, including

painting of fittings and brackets, cutting and making good the walls

wherever required. White Vitreous China Flat back wash basin size

550x400 mm with single 15 mm PTMT pillar cock.

79 17.22A Providing and fixing CP Brass 32mm size bottle trap of approved quality & Each 9 886.25 7976.25

make and as per the direction of engineer in charge.

80 17.28.2.2 Providing and fixing P.V.C. waste pipe for sink including P.V.C. waste Each 9 104.35 939.15

fittings complete.

81 18.58.1.1 Providing and fixing PTMT grating of approved quality and colour. Each 9 33.20 298.80

100 mm nominal dia

82 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling Each 9 45.30 407.70

of approved municipal design.

83 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of Each 9 1158.95 10430.55

required shape and size with plastic moulded frame of approved make

and shade with 6 mm thick hard board backing :

Rectangular shape 453x357 mm

84 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 Each 9.00 204.70 1842.30

mm wide with minimum distances of 37 mm from wall face with concealed

fittings arrangement of approved quality and colour, weighing not less

85 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to Each 9 600.35 5403.15

wooden cleats with CP brass screws with concealed fittings arrangement

of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width

78 mm and effective height of 88 mm, weighing not less

86 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : Each 9 85.20 766.80

15 mm nominal bore

87 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design Each 9 594.75 5352.75

and of approved make conforming to IS:8931.

88 18.49.1 Providing and fixing C.P. brass bib cock of approved quality conforming to Each 18 434.20 7815.60

15 mm nominal bore

89 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality Each 9 715.05 6435.45

conforming to IS standards and weighting not less than 810 gms.

15 mm nominal bore

90 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser Each 27 500.35 13509.45

points of approved quality conforming to IS:8931

a) 15 mm nominal bore

91 18.65 Providing and fixing PTMT soap Dish Holder having length of Each 9 96.75 870.75

138mm,breadth 102mm, height of 75mm with concealed fitting

arrangements, weighing not less than 106 gms.

92 18.8.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 162.00 441.15 71466.30

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

15 mm nominal dia Pipes

93 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 108.00 513.75 55485.00

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

20 mm nominal dia Pipes

94 18.8.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 54.00 626.05 33806.70

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

25 mm nominal dia Pipes

95 18.8.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, Metre 54.00 712.75 38488.50

having thermal stability for hot & cold water supply, including all

CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps

at 1.00 m spacing. This includes jointing of pipes & fittings with one

step CPVC solvent cement and the cost of cutting chases and making

good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making good the walls

32 mm nominal dia Pipes

96 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement Each 25.00 11687.10 292177.50

: 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement :

1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm

nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse

sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),

inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with a floating

coat of neat cement complete as per standard design : Inside size 90x80

cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) : With common burnt

clay F.P.S. (non modular)

bricks of class designation 7.5

97 17.23 Providing and fixing white vitreous china flat back or wall corner type each 2 1382.30 2764.60

lipped front urinal basin of 430x260x350 mm or 340x410x265 mm

sizes respectively.

98 NS-PL1 Providing and fixing uPVC pipes type -B conforming to IS: 13592 for soil, metre 108.00 719.00 77,652.00

waste and vent pipes including all fittings rubber ring type (plain or with

access door) e.g. bends, junctions, cowls, offsets, access pieces, jointing

with rubber ring joints with lubricant etc. fixed with clamps to walls.

For soil, waste and vent pipes

110 mm OD (6 kg pressure)

99 NS-PL3 Providing, fixing, jointing and testing in position the following uPVC pipes metre 54.00 176.10 9,509.40

conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings,

solvent weld joints, testing complete for drainage system cut to required

length to be laid under floor and making good the same complete as

For waste pipes

40mm OD (6 kg pressure)

100 NS-PL4 Providing, fixing, jointing and testing in position the following uPVC pipes metre 54.00 234.80 12,679.20

conforming to IS 4985 of 6 kg/sqcm pressure rating including all fittings,

solvent weld joints, testing complete for drainage system cut to required

length to be laid under floor and making good the same complete as

For waste pipes

50mm OD (6 kg pressure)

101 NS-PL6 Providing and fixing uPVC cleanout plug with openable cap for uPVC each 18.00 410.90 7,396.20

102 NS-PL7 Providing and fixing 110x110 mm uPVC 'P' trap with 2-3 inlets required each 18.00 770.30 13,865.40

size ftting with seal 50 mm of self cleansing design floor/urinal trap

without vent suspended with supporting clamp or in sunken portion

including cutting and making good the walls and floors wherever required

complete in all respects.

110 x110 mm outlet

103 NS-PL8 Providing and fixing uPVC floor drain of following size inlet and outlet each 18.00 264.10 4,753.80

including cutting and making good the walls and floors wherever required

complete in all respects.

110 x63mm outlet

104 NS-PL9 Providing & fixing PVC inlet fitting with one or more inlets fabricated from each 18.00 777.70 13,998.60

110 mm outer dia UPVC pipe and solvent welded sockets and fixed to

UPVC Trap and as per drawing complete

105 NS-PL10 Providing and fixing P.V.C. WC Connector (Straight/ or bend Type) with each 18.00 719.00 12,942.00

rubber lip ring, including 110mm dia PVC Pipe/ Bend of required length

and proper connection with M seal to C.I./PVC Pipe Complete as

106 2.10.1.1 Excavating trenches of required width for pipes cables etc including Metre 240 255.55 61332.00

excavation for sockets, and dressing of sides, ramming of bottoms, depth

upto 1.5 m ncluding getting out the excavated soil , and then returning the

soil as required , in layers not exceeding 20 cm in depth including

consolidating each deposited layer by ramming, watering, etc. and

disposing of surplus excavated soil as directed , within a lead of 50 m.

All kind of soil

Pipes, cables etc. not exceeding 80mm dia.

107 18.10.3 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, metre 72 491.20 35366.40

i/c cutting and making good the walls etc.

Internal work - Exposed on wall

25 mm dia nominal bore

108 18.12.4 Providing and fixing G.I. pipes complete with G.I. fittings including metre 48 457.70 21969.60

trenching and refilling etc.

32 mm dia nominal bore

109 18.12.5 Providing and fixing G.I. pipes complete with G.I. fittings including metre 240 558.35 134004.00

trenching and refilling etc.

40 mm dia nominal bore

110 18.13.1 Making connection of G.I. distribution branch with G.I. main of following each 30 757.10 22713.00

sizes by providing and fixing tee, including cutting and threading the

pipe etc. complete :

25 to 40 mm nominal bore

111 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low Each 20 399.15 7983.00

pressure, with plastic floats complete :

25 mm nominal bore

112 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved Each 20 532.35 10647.00

quality (screwed end) :

25 mm nominal bore

113 18.17.2 Providing and fixing gun metal gate valve with C.I. wheel of approved Each 15 589.90 8848.50

quality (screwed end) :

32 mm nominal bore

114 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved each 30 707.30 21219.00

quality (screwed end) :

40 mm nominal bore

115 18.19.2.2 Providing and fixing gun metal non- return valve of approved quality each 15 777.90 11668.50

(screwed end) :

32 mm nominal bore

116 18.19.3.1 Providing and fixing gun metal non- return valve of approved quality each 24 815.05 19561.20

(screwed end) :

40 mm nominal bore

117 18.46.3 Providing and fixing G.I. Union in G.I. pipe including cutting and threading Each 15 369.35 5540.25

the pipe and making long screws etc. complete (New work) :

25 mm Nominal Bore

118 18.46.4 Providing and fixing G.I. Union in G.I. pipe including cutting and Each 15 409.45 6141.75

threading the pipe and making long screws etc. complete (New

32 mm nominal bore

119 18.46.5 Providing and fixing G.I. Union in G.I. pipe including cutting and Each 15 523.20 7848.00

threading the pipe and making long screws etc. complete (New

40 mm nominal bore

120 18.38.3 Painting G.I. pipes and fittings with synthetic enamel white paint with two Metre 72 25.60 1843.20

coats over a ready mixed priming coat, both of approved quality for new

25 mm dia nominal bore

121 18.38.4 Painting G.I. pipes and fittings with synthetic enamel white paint with two Metre 48 30.70 1473.60

coats over a ready mixed priming coat, both of approved quality for new

32 mm dia nominal bore

122 18.38.5 Painting G.I. pipes and fittings with synthetic enamel white paint with two Metre 240 36.05 8652.00

coats over a ready mixed priming coat, both of approved quality for new

40 mm dia nominal bore

123 18.48 Providing and placing on terrace (at all floor levels) polyethylene water per Litre 12,500.00 9.7 121250.00

storage tank, IS : 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and overflow

pipes but without fittings and the base support for tank.

124 12.41.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes Metre 18.00 319.75 5755.50

conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)

Single socketed pipes.

110 mm diameter

125 12.43.2 Providing and Fixing on wall face unplasticised - PVC pipe clips of Each 72 309.50 22284.00

approved design to unplasticised - PVC rain water pipes by means of 50 x

50 x 50 mm hard wood plugs, screwed with M.S. screws of required

length including cutting brick work and fixing in cement mortar 1:4 (1

Cement: 4 Coarse sand) and making good the walls etc. complete

126 19.4.2.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete Each 24 2474.40 59385.60

with C.I. grating brick masonry chamber with water tight C.I. cover with

frame of 300 x300 mm size (inside) the weight of cover to be not less than

4.50 kg and frame to be not less than 2.70 kg as per standard design :

150 x 100mm size P-type

With common burnt clay F.P.S. (non modular) bricks of class designation

127 19.7.1.2 Constructing brick masonry manhole in cement mortar 1:4 ( 1 Each 12 11567.00 138804.00

cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1

cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20

mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4

coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal

size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement

: 3 coarse sand) finished with floating coat of neat cement and

making channels in cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size) finished with

a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal dimensions,

total weight of cover and frame to be not less than 38 kg

(weight of cover 23 kg and weight of frame 15 kg) :

With Sewer bricks conforming to IS : 4885

128 19.6.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. Metre 72 493.10 35503.20

pipes with collars jointed with stiff mixture of cement mortar in the

proportion of 1:2 (1 cement : 2 fine sand) including testing of joints

etc. complete :

150 mm dia. R.C.C. pipe

129 23.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by Metre 200 592.05 118410.00

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/ bore

log, including hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per direction of Engineer

-in-charge, up to 90 metre depth below ground level.

All Types of Soil

130 23.1.2.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by Metre 140 1416.30 198282.00

suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/ bore

log, including hire & running charges of all equipments, tools, plants &

machineries required for the job, all complete as per direction of Engineer

-in-charge, up to 90 metre depth below ground level.

Rocky strata including Boulders

131 23.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, Metre 140 971.30 135982.00

unplasticized PVC medium well casing (CM) pipe of required dia,

conforming to IS: 12818, including required hire and labour charges,

fittings & accessories etc. all complete, for all depths, as per direction of

Engineer-in-charge.

200 mm nominal size dia

132 23.4.3 Supplying, assembling, lowering and fixing in vertical position in bore well Metre 140 1099.25 153895.00

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming

to IS: 12818, including hire & labour charges, fittings & accessories etc.

all complete, for all depths, as per direction of Engineer-in-charge.

200 mm nominal size dia

133 23.13.3 Providing and fixing suitable size threaded mild steel cap or spot welded Each 2 280.95 561.90

plate to the top of bore well housing/ casing pipe, removable as per

requirement, all complete for borewell of:

134 23.15.3 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of Each 2 308.55 617.10

pipe assembly of tubewell as per IS:2800 (part I).

Total Plumbing work 20,14,757.15 1,52,796.60

Polyhouse works -

135 NS-PH1 Supply, erection, testing and commissioning of polyhouse including sqm 4700.00 945.50 44,43,850.00

Structural Materials i.e. G.I. Pipes, Profiles, G.I. Clamps, Hard wear,

Polycarbonate sheet , and , Zigzag Locking Springs fan pad system with

Misting irrigation system at RLBCAU campus as per the design, drawing

and technical specification complete including all items specified in

specifications in all respect as per the direction of Engineer-in-

charge/client (Excluding cost of civil works) (Plan area to be measured for

Total Poly house Work - 44,43,850.00

Prefab structure items -

139 NS-PF1 SITC of 80 mm thick Sandwich Roof Panel with internal flat liner with an sqm 622.14 4,175.00 25,97,434.50

insulation core of CFC free PUF/PIR foam fire retardant, self

extenguishing with minimum 40kg/m3 density conform to DIN 4102.

0.5mm TCT Colour coated Profiled sheet with yield strength 280MPA

confirming to IS-12426 on external facing. Closed cell content to be 90%

minimum. The panels have a protective guard film of minimum 20-25

microns to avoid scratches to finishing flashing during transportation. The

panels shall be fixed on the purlins with self-drilling, self-tapping fasteners

of approved quality and anti-corrosive polymer coated with integral

washers and EPDM seals complete as per specification and direction of

140 NS-PF2 SITC of 60 mm thick Sandwich Wall Panel with internal flat liner with an sqm 1212.87 4,019.40 48,75,009.68

insulation core of CFC free PUF/PIR foam fire retardant, self

extenguishing with minimum 40kg/m3 density conform to DIN 4102.

0.5mm TCT Colour coated Profiled sheet with yield strength 280MPA

confirming to IS-12426 on both facing. Closed cell content to be 90%

minimum. The panels have a protective guard film of minimum 20-25

microns to avoid scratches to finishing flashing during transportation. The

panels shall be fixed on the purlins with self-drilling, self-tapping fasteners

of approved quality and anti-corrosive polymer coated with integral

washers and EPDM seals complete as per specification and direction of

141 NS-PF3 Fixing & Covering all joints of above panels using proper & suitable size sqm 609.50 609.50 3,71,490.25

Flashings, comprising of 0.5 mm TCT Colour Coated Sheet. The Colour

Coated sheets will have substrate of Yield Strength 280 MPA and finish

as per IS 12426. The Flashing have a protective guard film of minimum

20-25 microns to avoid scratches to finishing.

142 NS-PF4 SITC of Flush Puf Door of 30 mm thickness with single rebate Frame with sqm 13.00 35,299.00 4,58,887.00

chrome finished accessories such as mortice lock, tower bolt and door

closure excluding toilet size as per specification and direction of EIC.

143 NS-PF5 SITC OF TEMPERATURE & LIGHT CONTROLLED TISSUE CULTURE 1 job 1.00 24,98,617.60 24,98,617.60

ROOM WITH TISSUE CULTURE CASTOR RACKS IN BUILDING AS

PER DIRECTION OF EIC.

Temperature Range: 15°C – 28°C±1°C

Humidity: 65% - 90% ± 5%.

Light Intensity: 6 – 10 Klux.

PUFF Panel thickness: 60 mm

General Tolerance: ± 5mm

PUFF Density: 60 ± 2 kg/m3

Panels are joints together by means to tongue and groove and locked

together & Camlock system on each side to ensure air tightness and

leakage. Both side 0.5mm thick Sheet

All joints of chamber to be properly sealed with Silicon sealant to avoid

any temperature loss.

Covered with pre painted sheets, thereby eliminating any fungal growth

WALL AND CEILING INSULATION OF GROWTH AND INOCULATION

ROOM: With puff 60mm thick Grade 38 Kg/m³ with Polyester pre-coated

GI outer surface having 60 mm polyurethane (Puff ) insulation

Pre-fabricated (Easy to install) panel system duly sealed to prevent

leakage. Flushed door (6’ x 3’) duly insulated may be provided with see

through hatch window of 35cm x 35cm (Toughened Vacuum Glass

Panel fitted with aluminum section)

Floor made of PUFF panels of thickness 60mm, PUFF Density: 60±2

kg/m3 to be use in main Chamber, superimposed with ply 6mm and fitted

with Anti Skid chequered aluminum Sheet.

Door is provided with magnetic door closer and made of thick Stainless

Steel Sheet from inside &

PPGI Sheet from outer side. Puff density 60kg ±2/m3,

HEAT CONVECTOR: Heat convector with paralytic technique, Auto

thermal cut off device, 2 / 2.4 KW heater, variable speed selector switch

selective combustive material chosen for minimum utilization for

atmospheric oxygen, Input 200-240 VAC, 50 HZ, single phase.

Ambient 5°C to 50°C, RH up to 90%.

COOLING SYSTEM:

Complete 15000+ BTU machine with ISI mark CFC free Eco friendly

HERMATIC sealed compressor

of EMERSON make (Imported) with wall mounted type sleek design

evaporator, Compressor coupled

with evaporation coil and condenser.

Split type indoor & outdoor unit and the Condenser Unit shall be placed

in well-ventilated area to avoid

throw of hot air in the stability room

Condensing unit is of sleek design, pressed sheet metal component,

inner grooved copper tubes, slit

aluminum fins, permanently lubricated fan and motor.

High insulation K value and superior characteristics thermal coefficients

and insulation. No messy civil

work thereby reducing installation time

ROOM TEMPERATURE:

Temperature Range: 15°C – 28°C

Accuracy: ±1.0°C

Digitally Controlled by Microprocessor based PID Digital Temperature

Indicator Cum Controller.

DE-HUMIDIFICATION SYSTEM:

Humidity shall be maintained from 55%RH to 95%RH (±3%) at

Temperature Range +15°C to +25 ºC, Multidirectional

air outlet, The multi-directional front outlet provides a wide range of air

circulation which dries

more space desired. Microcomputer automatic control, Movable handle

and easy-glide casters, Compact

design with a handle. Easy to lift, Casters allow the unit to be moved

easily from one place to another. Air

purifying filter Option Besides the nylon filter and activated charcoal filter

can be used for removing dust,

smoke and unpleasant odor. Power: 220-240V, 50Hz Microcomputer

humidity-level controls

ULTRA SONIC VAPOUR HUMIDIFIER: It creates the simulated natural

humidity in Growth Room any specific room without disturbing the inside

temperature because vapour comes out in cold form.

Salient Features:

ELECTRICAL WIRING

Electrical Device: High quality ISI approved fittings with FR grade copper

cable (ISI standard make) and rigid Stds of safety with proper M.C.B. and

main ON/OFF switch. Complete with electric wiring. Inside the lab and

main connecting cable should be provided.

Fitted with Microprocessor based Profile Controller which can be pre

programmed as per different Temperature & Humidity required.

SAFETY & ALARM SYSTEM:

Control panel shall be fitted with Safety devices for Temperature &

Humidity Over & Undershoot. Time delays relay & overload protection

circuit to safeguard the compressor & to enhance the compressor life.

Panel fitted with Audio-visual alarms for Temperature & Humidity

ILLUMINATION SYSTEM: 3000 LUX, Inner Chamber shall be fitted with

lights to provide the Illumination.

POWER SOURCE : 220-240VAC, 50Hz, single / Three phase

COLD ROOM SIZE: 13’ x 10’ x 10’ (W x L x H)

Frame is made of 25 x 25 mm square pipe with siemens gray / off white

Shelf to shelf distance 37.5 cm (15”) Shelf base is made of good quality

Four No's of tube light is fitted with every shelf (i.e. total 16 tube lights)

to produce excellent photo simulated light Illumination: 1.2K Lux at 5 cm

above shelf level ^ 8K lux at 15 cm above shelf level

separate switch if provided for each tube light.

Electronic ballast is connected with every tube light. 200-220 V AC

144 NS-6 Supply of Aquirium of 3.5 feet x 2 feet x 2 feet approx, capacity min. 150 each 2.00 45,228.80 90,457.60

lit., with water rotating filter, pump, temperature control system,

ornamental work inside with pebbles, trees etc. as required, ornamental

fish minimum 10 nos , two turtle (gold fish or equivalent of minimum 100

mm size in length), storage box at bottom complete in all respect as per

direction of client/ EIC

145 NS-7 Providing and fixing Aluminium Partition panel of 3mm thickness with sqm 150.00 868.70 1,30,305.00

framing (if required) at desired location complete in all respect as per

direction of Engineer in charge

Total Prefab works - 110,22,201.63

PROJECT- : “Construction of different RKVY Units, Poly houses, compost unit, Development of tissue

culture lab, vehicle parking and training hall, hybridization facility and other miscellaneous farm & External

Development works for RLBCAU, Jhansi, UP”

SUMMARY OF COST ELECTRICAL WORKS

S.NO NAME OF SUB-HEAD

CPWD DSR 2018 items Non Scheduled items

1 SUB HEAD-I: W I R I N G & SUBMAIN 25,58,400.00

2 SUB HEAD -II : DISTRIBUTION BOARD 2,13,076.00

3 SUB HEAD - III : LIGHTING FIXTURE & FAN 29,400.00 3,34,550.00

4 SUB HEAD - IV :EARTHING WORK 3,70,474.00

SUB HEAD - V :MV CABLE LAYING & END

TERMINATION WORK

6 SUB HEAD - VI :CIVIL WORK 1,79,400.00

11 SUB HEAD - VII :DISTRIBUTION PANEL WORK 15,21,085.00

14 SUB HEAD - IX :SUPPLY OF MV CABLE WORK 18,94,720.00

15 SUB HEAD - X:SAFETY EQUIPMENT WORK 4,87,736.00

JHANSI SOQ-24SUMMARY- EXTERNAL ELECTRICAL WORK

Sub-Head - XI- EXTERNAL VIDEO SURVEILLANCE

SYSTEM (IP CCTV)

17 ANNUAL MAINTENANCE OF RO SYSTEM 7,71,631.00

18 Sub-Head - XIII- SEEDER MACHINE AND OTHERS 45,27,098.00

19 Solar Photovoltaic Work 2,95,998.49

TOTAL AMOUNT 169,54,385.49

TOTAL AMOUNT 169,54,385.49

JHANSI SOQ-25SUMMARY- EXTERNAL ELECTRICAL WORK

PROJECT- : “Construction of different RKVY Units, Poly houses, compost unit, Development of tissue culture lab, vehicle parking and training hall, hybridization

facility and other miscellaneous farm & External Development works for RLBCAU, Jhansi, UP”

BILL OF QUNATITIES FOR ELECTRICAL WORKS

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

1 SUB HEAD-I: W I R I N G & SUBMAIN

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed medium class PVC conduit, with modular

1.0 1.10 switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in

2.0 1.12 surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper Metre 2500 200 500000

conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in

3.0 1.13 surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper Metre 100 308 30800

conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

4.0 1.14 copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

4.2 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 420 249 104580

4.3 1.14.9 4 X 6 sq. mm + 2 X 6 sq. mm earth wire Metre 350 394 137900

4.4 1.14.10 4 X 10 sq. mm + 2 X 10 sq. mm earth wire Metre 550 543 298650

4.5 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 450 752 338400

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate

5.0 1.25 switch box including connections but excluding modular plate etc. as required. Each 45 342 15390

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

JHANSI SOQ-1External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

7.0 1.31 including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections Each 90 401 36090

etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

8.0 1.32 including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, Each 60 495 29700

connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including

connections etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length

(upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including

10.0 1.45 providing and fixing phenolic laminated sheet cover on the fan box etc. as required. Each 45 203 9135

Installation of exhaust fan in the existing opening, including making good the damage, connection,

testing, commissioning etc. as required.

12.0 1.51 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. Each 15 168 2520

Total of Sub-Head - I carried to summary sheet 2558400

13.0 2 SUB HEAD -II : DISTRIBUTION BOARD

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V,

on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

14.1 2.3.2 8 way, Double door Each 5 1760 8800

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution

board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din

15.0 2.4 bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/

JHANSI SOQ-2External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for

16.0 2.10 inductive load of following poles in the existing MCB DB complete with connections, testing and

commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current

20.0 2.14 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A, 415 V “C” curve

21.0 2.17 TP MCB complete with connections, testing and commissioning etc. as required. Each 10 1146 11460

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed

plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with

chained metal cover for the socket out let and complete with connections, testing and commissioning etc.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm

23.0 2.21 thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as Each 10 226 2260

Total of Sub-Head - II carried to summary sheet 213076

SUB HEAD - III : LIGHTING FIXTURE & FAN

JHANSI SOQ-3External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all

types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5

24 1.41 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 175 168.00 29400

25 NS-1 Supply of Light fixture as given below

25.1 1.1 Supply of 15W(Nominal) Surface Mounted LED square/circular Downlighter. Each 80 1341.00 107280

25.2 1.2 Supply of 20W(Nominal) Wall/Surface mouted 4 ft. LED. Each 60 494.00 29640

25.3 1.3 Supply of 10 W(Nominal) Bulk head Light. Each 30 1765.00 52950

25.4 1.4 Supply of Mirror Light. Each 5 424.00 2120

Supply of 1200 mm sweep 3 blade energy saving Ceiling fan complete with assembling of blades, down

rod, shackle insulator, canopy etc. (BEE-5 Star)

Supplying of Plastic Body Ornamental Exhaust Fan Light duty 230V A.C 50 cycles, 300 mm sweep,

1300 rpm, energy efficient, complete erected in position with all accessories.

Total of Sub-Head - III carried to summary sheet 334550

28 Sub-Head - IV- EARTHING

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry

29.0 5.2 enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and Each 12 5308.00 63,696.00

salt as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

30.0 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. Set 15 6216.00 93,240.00

with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing

31.0 5.5 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. Set 2 10724.00 21,448.00

(but without charcoal/ coke and salt ) as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode,

including connection/ termination with GI thimble etc. as required.(For Pole earthing).

JHANSI SOQ-4External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including

connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including

connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I.

pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Total of Sub-Head - IV carried to summary sheet 3,70,474.00

36 Sub-Head - V - MV CABLE LAYING & END TERMINATION WORK

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following

37.0 7.1 size direct in ground including excavation, sand cushioning, protective covering and refilling the trench

etc as required.

37.2 7.1.2 Above 35 sq. mm and upto 95 sq. mm Metre 680 338.0 2,29,840.00

37.3 7.1.3 Above 95 sq. mm and upto 185 sq. mm Metre 550 352.0 1,93,600.00

37.4 7.1.4 Above 185 sq. mm and upto 400 sq. mm Metre 250 396.0 99,000.00

38.0 9 MV CABLE END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following

size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

40.0 MV CABLE JOINTING

JHANSI SOQ-5External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing

41.0 9.4 materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as equired.

Total of Sub-Head - V carried to summary sheet 15,41,787.00

42.0 14.0 Sub-Head - VI - CIVIL WORK

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

43.0 14.1 collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and

refilling etc as required.

Total of Sub-Head - VI carried to summary sheet 1,79,400

44.0 NS-2 SUB HEAD - VII :DISTRIBUTION PANEL WORK .

The contractor shall consider the following details in their item rates, wherever required:

1 Supporting rigid steel framework.

2 Cubicle type, 14 gauge CRCA sheet steel enclouser.

3 Complete with interconnections and distribution bus bars.

4 Proper bonding to earth.

5 Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its circuit diagram.

6 Providing cable clamps / supports within distribution boards cable alley.

7 TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8 All MCB’s shall be of minimum 10 KA breaking capacity.

9 All motor feeders MCCBs shall be of motor duty.

10 Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

11 Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

12 IP 42 for indoor panels.

13 IP 54 for kitchen and laundry panels.

14 IP 55 for outdoor panels

15 All MCCB’s shall be provided with operating mechanism for door interlock.

JHANSI SOQ-6External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current of bus bars and current density of copper shall be 1 sq.mm for 1.25 amps for

rated current of bus bars.

17 Tinned copper earth bus shall be provided through out the length of each board.

18 All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible with BAS.

19 All hinged door shall be earthed through 4.0 sq mm tinned braided copper wire.

20 All panels shall have provision of the following:

Pad locking of Switch board doors.

Pad locking of MCCB’s handles in “OFF” Position.

Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for BAS including space required for various

21 transducers in Main Switch Board sections. Only transducers shall be supplied by BAS contractor.

All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and inductive (motor) load shall be of type “C”

characteristic and discharge lamps and UPS etc. shall be of type D characteristic.

All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier formation.

24 All PTs / control transformer shall be provided with centre tap earth secondary.

25 All DOL & Star-Delta Starters shall be provided with SPPR (single phase preventor relay) and 2 nos. of Aux.Contacts for Remote operation/monitor.

26 The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of cables are terminated in the breakers.

27 Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs

The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic releases upto 250 amps and miroprocessor

based above 250 amps capacity, unless specified otherwise.

29 Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM) shall be as described below .

A Protection Release Microprocessor Based (PRMB-1)

Over-current/long time protection range 40% - 100 % with Time setting

short circuit /short time protection range 100% - 1000 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time setting

Under voltage & over voltage protection

Current unbalance

JHANSI SOQ-7External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Power (Active,Reactive & Apparent)

Energy ((Active,Reactive & Apparent)

B Protection Release Microprocessor Based (PRMB-2)

Over-current/long time protection range 40% - 100 % with Time setting

short circuit /short time protection range 100% - 1000 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time setting

C Protection Release Microprocessor Based (PRMB-3)

Over-current/long time protection range 40% - 100 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

D Protection Release Thermal-Magnetic Based (PRTM)

(Note:The contractor may select the next higher fault rating of MCCB if it is not readily available ,without

any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel).

49.0 FRONT OPERATED PANEL

Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free

standing, dust and vermin proof Panel with IP65 ingress protection, fabricated from 2 mm thick CRCA

sheets, with hinged, gasketted and lockable doors including the cost of interconnections, copper crimping

lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz

system with 31 MVA rupturing capacity at 415 volts complete as per specifications, as required and as

50.0 2.1 Main External Lighting panel (IP-65)

JHANSI SOQ-8External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient

voltage surge suppression device suitable for 3 phases as per specifications.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

i) 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 8 Nos. 63A TP+NL MCCB (25 KA)

Main External Lighting panel (IP-65) as described above Set 1 159808 159808

51.0 2.2 Sub External lighting Feeder piller

1 No. 63A,4P MCCB (25kA) and ON/OFF indicating lamps.

1 No. 63A, 3 phase Timer Switch for automatic operation.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps.

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB.

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's.

1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves.

Ten(10) nos 25 Amp 4P MCB, 10 KA.

Sub External lighting Feeder piller described as above Set 2 167072 3,34,144.00

52.0 2.3 Feeder Pileer-1 (IP-65)

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient

voltage surge suppression device suitable for 3 phases as per specifications.

JHANSI SOQ-9External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

i) 1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 3 Nos. 100A TP+NL MCCB (25 KA)

Feeder Pileer-1 (IP-65) as described above Set 1 138016 138016

53.0 2.4 Feeder Pileer-5 (IP-65)

1 No. 630 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient

voltage surge suppression device suitable for 3 phases as per specifications.

B METERING & INDICATION FOR EACH INCOMER

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-630A) Ammeter with ASS with 3 nos. 600/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

i) 1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 5 Nos. 200A TP+NL MCCB (25 KA)

Feeder Pileer-5 (IP-65) as described above Set 1 421313 421313

54.0 2.5 Typical floor panel

1 No. 200 amps 4P MCCB(25 KA) with thermal Magnetic release

JHANSI SOQ-10External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

(PRMB-3) with Class-C transient voltage surge suppression device

suitable for 3 phases as per specifications.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

ii) 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-200A) Ammeter with ASS with 3 nos. 200/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

i) 1 Set of 250A TPN Aluminium Bus Bar with colour coded PVC

i) 4 Nos. 63A TP+NL MCCB (25 KA)

ii) 2 Nos. 63A TPN MCB (10 KA)

Typical Floor Panel described as above Set 4 116951 467804

Total of Sub-Head - VII carried to summary sheet 15,21,085.00

SUB HEAD - IX :SUPPLY OF MV CABLE WORK

55.0 NS-3 Supply of MV cable

Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor

power/ multicore control armoured cable of 1.1 KV grade.

55.6 NS-3.5 3 ½ C - 35 sq mm Aluminium Metre 60 349.50 20,970.00

55.7 NS-3.6 4 C - 25 sq mm Aluminium Metre 50 304.00 15,200.00

55.8 NS-3.7 4 C - 16 sq mm Aluminium Metre 50 226.00 11,300.00

Total of Sub-Head - IX carried to summary sheet 18,94,720.00

56.0 NS-4 SUB HEAD - X:SAFETY EQUIPMENT WORK

56.1 4.1 Providing and fixing NO SMOKING & DANGER ZONE signboards. Nos. 2 353 706.00

56.2 4.2 Providing and fixing ISI marked CO2 4.5 Kg. Capacity as per latest IS. Nos. 10 13411 1,34,110.00

JHANSI SOQ-11External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

56.3 4.3 Providing and fixing ISI marked Chemical foam type of 9 liters as per latest IS (trolley marker). Nos. 10 17646 1,76,460.00

56.4 4.4 Providing and fixing ISI marked Dry chemical powder type (5 Kg.) as per latest IS. Nos. 10 17646 1,76,460.00

Total of Sub-Head - X carried to summary sheet 4,87,736

57.0 NS-5 Sub-Head - XI- EXTERNAL VIDEO SURVEILLANCE SYSTEM (IP CCTV)

Supply, installation, testing and commissioning of 2 megapixels resolution Network Bullet camera

camera,Imager 1/2.8” Progressive Scan CMOS,Video Compression. .H.264/MJPEG,Day/Night-IR Cut

Filter,Minimum Illumination-0Lux/F1.4(IR ON) IR Range-Up to 50 Meter,Electronic Shutter-

Auto/Manual(1/25~1/10000), Lens 2.8 to 12 mm Motorized zoom Lens,Resolution Main-

1920x1080p,Digital Noise Reduction-3D,Wide Dynamic Range-120db, Behavior Analysis-Line crossing

detection, intrusion detection, unattended baggage detection, object removal detection.Support Face

Detection. Region of Interest Support 1 ROI per stream.Power Consumption and Current- 12 VDC, 1.2A,

max. 14.5W PoE (802.3at, 42.5V to 57V), 0.5A to 0.1A, max. 16.5W.Protection Level IP67, IK10 TVS

2000V Lightning Protection, Surge Protection and Voltage Transient Protection.Regulatory UL, CE,

FCC.Operating Conditions Temperature: -30 °C to +60 °C (-22 °F to +140 °F).Humidity: 95% or less.

Supplying of 1/2.8’’ Progressive Scan CMOS PTZ Dome Camera with laser IR,Compression-

H.264/MJPEG/MPEG4,Focal Length - 4.3-129mm, Optical zoom 30x and digital zoom 16x,Max. Image

Resolution-1920×1080,Frame Rate 50Hz: 25fps(1920×1080) 360° endless pan range and -2°-90° tilt

range,240°/s Pan Preset Speed and 200°/s Tilt Preset Speed,0.1°-160°/s Manual Pan Speed and 1°-

120°/s Manual Tilt Speed,256 presets programmable; preset image freezing capability ,8 patrols, up to

57.2 5.2 32 presets per patrol 4 patterns, with the recording time not less than 10 minutes per pattern,SD/SDHC Each 1 324688.00 324688

card local storage Support up to 8 NAS storage; Edge recording (transmit the videos from SD card to the

NAS after network resumed) High performance Laser IR LED covering up to 500m (IR) distance 3D

intelligent positioning function,3D DNR,Protection Level-IP66 standard,TVS 6,000V lightning protection,

surge protection and voltage transient protection.

JHANSI SOQ-12External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supplying of 2U Rack mount single chassis Network Video Recorder with dual Gb NIC, 1 DVI-I + HDMI

+ 1 Display Port, max 2 simultaneous monitors, RS-232/485 serial port, DVD, Server Operating System-

Windows 10,Ubuntu Linux 16.04, Processor-Gen 4 Intel Core i3, Local Client Display Rate

(FPS)Windows – 700 FPS (HD)Linux – 900 FPS (HD),High Performance, High Reliability IP Recorder.

— Continuously records 300Mbps (Windows) & 450 Mbps (Linux)of video while hosting a local client,

multiple remote clients and the web server on a single server,RAM-4 GB, 8 GB, 12 GB (Optional)solid-

state operating system drive,USB-6 x USB 2.0, 2 x USB 3.0 high air flow cooling and hardware

57.3 5.3 monitoring features ensure maximum uptime. keyboard and mouse, Professional Grade client and Each 1 776428.00 776428

server software pre-installed and software updates. Access live and recorded video on multiple client

PCs with free Windows, Mac or Linux client application. web server application is pre-installed on the

server to access video through a web browser or free Mobile iPhone / iPad and Android apps. Maximum

Storage Capacity 30TB & Maximum Hard Drive 3 Slot(Up to 10TB) Support Up to 64 IP Camera

57.4 5.4 Supply, installation, testing and commissioning of Enterprise Class 6TB HDD. Make-WD/Seagate Each 1 45174.00 45174

Supply, installation, testing and commissioning of Video Management System (VMS) software shall be

used to view live and recorded video from capture cards and IP devices connected to local and wide area

networks. The VMS software shall have a client/server-based architecture that can be configured as a

standalone VMS system with the client software running on the server hardware and/or the client running

on any network-connected TCP/IP workstation. Multiple client workstations shall be capable of

simultaneously viewing live and/or recorded video from one or more servers. Multiple servers shall also

57.5 5.5 be able to simultaneously provide live and/or recorded video to one or more workstations. The VMS Each 6 13835.00 83010

server software shall also have the ability to be installed on an IP edge device—such as an IP camera or

encoder that allows for 3rd party applications—allowing the device to serve as both a server and IP video

recording device.The VMS shall not charge for the number of concurrent clients (min. 50 thick clients and

16 mobile clients to be provided along with VMS).

Supply & Laying of outdoor armoured 4-pair Category 6 cable as per TIA-568C.2, The cable should be

57.6 5.6 tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC Mtrs 500 113.00 56500

61034-2 & IEC 60754-1 respectively.

JHANSI SOQ-13External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supply, installation, testing & commissioning of Feeder Piller having IP55 Outdoor 17U Network Rack

with Hood and FAN For Field Devices. The Rack box shall be provided with external earthing lugs 5

57.7 5.7 socket Power terminaton with MCB or More Proper/Steady fixing through Each 2 74819.00 149638

Supply, installation, testing & commissioning of 12 Port PoE+ Switch with 2 SFP slots 12 x 10/100/1000

Base-T PoE+ ports and additional 2 100/1000X SFP PORTS Should support PoE+ as per IEEE 802.3 at

with PoE budget of 100W.Should support STP, RSTP, MSTP, IGMP v1/v2/v3 snooping, STP root guard,

57.8 5.8 Voice VLAN, MLD snooping (MLDv1 and v2), IEEE 802.3ac VLAN tagging IEEE 802.17/equivalent for Each 2 110112.00 220224

sub 50ms ring protection in following scenario : single, dual fibre cuts in ring and when fibre cut at

common shared link in between two or more rings.

Supply and fixing of 7.0 Mtrs G.I. Octagonal Pole (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick

with base plate of 250 x 250 x 16 mm, 4 nos. 600 mm long M20 foundation bolts & hardwares (suitable

reinforcements to be inserted in the foundation and 40mm x 2 nos. GI pipes for In/Out of main cables)

Any other accessories etc. required complete in all respect as per direction of Engineer in charge. The

pole shall also be provided with recessed lockable GI junction box of suitable size and flush door at the

bottom with proper strengthening for the cutout of the door opening of junction box. The cost of RCC

foundation shall be Included

Supply, installation, testing & commissioning of IP55 Outdoor Junction Box For Field Devices at camera

side. JB must be of appropriate size to house different components as per CCTV system design

confirming. The junction box shall be fixing along with weather proof clamping with pole as per site

Supplying, Installation,Testing & Commissioning of 40 " LED Full HD TV Resolution 1920 x 1080

,Contrast Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W), Magic Clone (to USB), Auto Source

Switching & Recovery, Lamp Error Detection, Super Clear Coating, Temperature Sensor, Plug and Play

57.12 5.11 (DDC2B), Pivot Display, Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation, Button Lock, Each 1 56467.00 56467

HDCP Support, Smart Scheduling, Smart F/W update, Built-In MagicInfo Premium-Swith Mounting

Brackets as per Technical Specification complete in all respect. Approved

Supply, installation, testing & commissioning of online 1KVA fully Microprocessor Based UPS System

suitable for Single phase, AC 50 Hz. input supply comprising of following features.High Frequency PWM

57.13 5.12 Inverter using IGBT Technology Manual by pass switch LCD disply SMF VRLA Batteires with 30 minutes Each 2 35292.00 70584

back up time for full load including interconnecting cables Battery Rack.

JHANSI SOQ-14External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Supplying and laying of permanently Solid Lubricated Double Wall Corrugated HDPE Pipe 32 mm inner

57.14 5.13 dia with 40 mm outer dia, conforming to IS-14930 (Part-II), having anti rodancy features complete with Mtrs 150 226.00 33900

accessories including slip fit/push fit type couplers

57.15 5.14 Supply and laying of Heavy duty 25MM PVC Concduit along with all accessories. Mtrs 50 99.00 4950

Digging of Hard/Soft soil at 750mm depth including excavation and refilling of earth.This shall include

pull boxes and cable route markers every 50mtr with all accessories

Total of Sub-Head - XI carried to summary sheet 2229030

58.0 NS-6 Sub-Head - XII-MISCELLANEOUS

Annual Maintenance OF 1 NO RO 1500 LTR/HR capacity, 3 NO RO 250 LTR/HR capacity, 2 NO RO 10 1 job 1 771631 7,71,631.00

LTR/HR CAPACITY, 12 NO ACADEMIC WATER COOLERS , 4 NO ADMIN WATER COOLERS & 2 NO

HOSTEL COOLERS including 2 no of pressure pumps at RLBCAU UNIVERSITY as per direction of EIC.

59.0 NS-7 Sub-Head - XIII- SEEDER MACHINE AND OTHERS

Supply & Installation of Seeder Machine & Chamber for

Seeder Machine complete in all respect as per direction of engineer-in-charge

JHANSI SOQ-15External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Infrastructure:

Chamber for seeder machine

mm thick with false ceiling. With two door & two windows,. Roof hut type,

Floor: made by made by PCC (1:5:10)100 mm thick than CC (1:2:4) 100 mm thick with dully plastered.

Air bars within double row of nozzles and seed holding plate with pneumatic

with 2 drilled bars with mounted conveyer size 3000mm x 565mm

Electrical wiring as per required complete in all respect as per direction of Engineer in charge

Refilling of fire extinguisher cylinder of 6kg type ABC including filling the same at site/respective existing

Ns-8.1 location. Nothing extra shall be payable for handling, carriage of cylinders complete in all respect as per each 95 880 83,600.00

direction of Engineer in charge

Refilling of fire extinguisher cylinder of 4.5 kg CO2 type including filling the same at site/respective

Ns-8.2 existing location. Nothing extra shall be payable for handling, carriage of cylinders, complete in all each 95 660 62,700.00

respect as per direction of Engineer in charge

Refilling of fire extinguisher cylinder of 9 liter AFFF type including filling the same at site/respective

Ns-8.3 existing location. Nothing extra shall be payable for handling, carriage of cylinders, complete in all each 22 990 21,780.00

respect as per direction of Engineer in charge

JHANSI SOQ-16External Electrical Estimate

Sr. No. Description Unit Total Qty Rate (Rs) Amount( Rs )

Refilling of fire extinguisher cylinder of foam wheel type 60 liter including filling the same at

Ns-8.4 site/respective existing location. Nothing extra shall be payable for handling, carriage of cylinders, each 12 5133 61,596.00

complete in all respect as per direction of Engineer in charge

Total of Sub-Head - XII carried to summary sheet 45,27,098

59.0 NS-9 Solar Photovoltaic Work

Supply,Installation,TestingandCommissioningofongridSolarPhotovoltaicPowerPlantconformingtoMNREsp

ecificationsasamended,consistingofMono/PolyCrystallinesiliconsolarcells,netmeteringfacility,necessarypr

Ns-9.1 otections,earthing,mountedonAluminium/GIstructureofsuitablestrengthwithfollowingcomponents complete Kwp 4.847666 61060 2,95,998.49

a)SolarPhotovoltaicModuleofcapacity330Wporabove,manufacturedinIndia,conformingtoIS14286/IEC6121

5,IS/IEC61730-Part-1,IS/IEC61730-Part-

2.SolarPhotovoltaicModuleconversionefficiencyshallnotbelessthan16.5%.PVmodulesusedinsolarpowerpla

nts/systemsmustbewarrantedfortheiroutputpeakwattcapacity,whichshouldnotbelessthan90%attheendof10

yearsand80%attheend of 25 years.

b)PowerConditioningUnit(PCU)of350-800VDCInputvoltagerangeand400VAC,threephase,4wire,50Hz+/-

2.5Hz,outputvoltagesuitabletogenerateACPowerwithefficiencynotlessthan97%,totalharmonicdistortionless

than3%andsuitableforambienttemperaturefrom0to50degreeC.ThePCUshalladjustthevoltage and

frequency level to suit the Grid Voltage Frequency.

c) Data Monitoring System complete with accessories.

d ) Fixing of Array junction box& Main junction box with IP65

protectionandterminationarrangementforincomingandoutgoingcablealongwithglands,lugsand other

accessories etc. as required.

e) Lightning and surge voltage protection.

f)Connections&Interconnectionsbysupplying&fixingrequiredsizeXLPEinsulated

copperconductor1.1kVgradearmouredpowerandcontrolcablesbetweensolarmodules,mainpowercabletogri

dsupplyPCUunitalongwithsupplying&fixingofnecessarychannel/conduitlugsandotheraccessoriesetc.asreq

Total of Sub-Head carried to summary sheet 2,95,998.49

JHANSI SOQ-17External Electrical Estimate