Construction for Sub-Divisional Office Building at Mahua,Vaishali.

BOQ for Construction for Sub-Divisional Office Building at Mahua,Vaishali for the Year 2025-26

Estimate Cost :-76894603.00 (Civil) 10248084.00 (Electrical) Total:- 8,71,42,687.00 Date of sale of B.O.Q. :- 08.08.2026 to 31.08.2026

Earnest Money :- 17,42,900.00 Date of Tender :- 01.09.2026

Cost of B.O.Q :- 10,000.00 Time of Completion :- 12 Months

Sl. No. Code Item Sub Divisional Office Building PHE+Boring Boundary Wall Road and Campus Development Fire Fighting Work Miscellaneous Work Furniture Quantity Unit Rate (Rs.) Amount (Rs.)

1 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m All kinds of soil. 1840.15 M3 1355.4

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 2838.56 73.18 254.0228 M3 360.7

3 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 795.78 14.96 12.644625 M3 287.3

4 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 17.78 81.6575 M2 283.3

5 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 158.54 M3 3998.1

6 11.73 Providing designation 100 A one brick on edge soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 195.67 1616.82156 M2 444.8

7 5.33.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 15.9 10.87 M3 5063.4

8 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 10 3 M3 123.9

6.1.12/1 Brickworkwithbricksof classdesignation100Ain foundationsand plinth in :Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 55.29 M3 5017.9

9 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 77.21 5.526563 M3 4819.9

10 6.1.14C Brickworkwithflyashbricks asperIS12894(2002)&IS3495in foundations and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand ) 6 M3 4923

11 6.14.C + 6.3C Brick work with fly ash bricks as per IS 2894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) + Extra tor Brick work in superstructure above plinth level upto floor V cum M3 5765.2

12 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand ) + Extra tor Brick work in superstructure above plinth level upto floor V cum 30.17 M3 5958.5

13 5.33.2 and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level upto floor V Level. Concrete of M-25 grade with minimum cement content of 330 kg/cum 15.41 M3 5863.2

14 5.2.1 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement. 1:1:2 (1 cement: 1 coarse sand: 2 graded stone aggregate 20 mm nominal size) 25.05 7.73 M3 6943.5

15 5.22 Reinforcement for R.C.C. work including traightening, cutting, bending, placing in position and binding all complete.

(a) 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 54466.3 1318.8 Kg 94.5

(b) 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 10893.26 397.8 Kg 92.6

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 54466.3 Kg 90.8

5.22.7D Thermo-Mechanically Treated bars TMT Fe-500-I6mrn dia. 65359.56 453.5 Kg 91.7

5.22.7E Thermo-Mechanically Treated bars TMT Fe-500-20mm dia. 32679.78 Kg 91.7

5.22.1E Mild steel 8.0 mm dia 690.41 Kg 97.1

5.22.1F Mild steel 10.0 mm dia 1380.82 Kg 96.7

5.22.1G Mild steel 12.0/12.7 mm dia 1380.82 Kg 96.7

16 5.9.1 Centring and shuttering including trutting,propping etc. and removal of form for. Foundations, footings, bases of columns etc. for mass concrete. 204.55 95.4257 11.0685 Kg 211.6

17 5.9.6 Centring and shuttering including strutting,propping etc. and removal of form for. Columns,Pillars, Piers, Abutments, Posts and Struts 0.0000 12.8 M2 494.4

18 5.9.5 Centring and shuttering including strutting,propping etc. and removal of form for. Lintels, beams, plinth bams, griders, bressumers and contilevers. 68.44 0.096000 M2 404.7

19 5.9.19 Centring and shuttering including strutting,propping etc. and removal of form for. Weather shade,Chajjas, corbels etc. including edges M2 550.9

20 5.9.7 Centring and shuttering including strutting,propping etc. and removal of form for. Stairs,(excluding landings) except spiral-staircaces. M2 439.9

21 5.9.4 Centring and shuttering including strutting,propping etc. and removal of form for. Shelves (Cost in situ) M2 437.5

22 12.78.2 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 110 mm diameter 125 60 Mtr. 257.5

23 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

12.79.1.2 Coupler 110mm 478 Each 120

12.79.3.2 Single tee with door 110x110x110mm 146 Each 193.4

12.79.5.2 Band 87.50 110 mm bend 318 Each 132

12.79.6.2 Shoe plain 110m Shoe 146 Each 115.95

24 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 110 mm 500 100 10 Each 182.72

25 18.10.5 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 40 mm dia nominal bore Mtr. 589.2

26 9.21.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 143.34 M2 1775.3

27 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc 10364.68 Kg 161.1

28 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 130 Each 165.4

29 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 20.54 M2 6303.4

30 10.12 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. Doors 182.78 M2 3038.9

31 11.47.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600 x 600 mm. M2 1333.3

32 11.26 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 20 to 25 mm thick - M2 1252.7

33 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 32.3 M2 1334.9

34 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm. 138.17 M2 1191.8

35 11.23.1 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with: Makrana white second quality. 188.18 M2 2934.3

36 8.2.1.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Rajnagar plain white marble /Udaipur green marble/ Zebra block marble Area of slab over 0.50 sqm 80.67 M2 2615.3

37 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 392.75 M2 795

38 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such shades except white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 89.95 M2 862.4

39 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 343.88 209.37125 M2 203.6

40 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 6120.65 881.35 16 M2 141.5

41 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 2136.28 14.75 M2 125.6

42 8.3.1 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work 60.96 M 154.2

43 13.77.2 + 13.78.2 Distempering with oil bound washa ble distemper of approved brand and manufacture to give an even shade . New work (two or more coats ) over and including priming coat with cement primer + Applying one coat of cement primer of approved brand and manufacture on wall surface: Distemper primer 6173.05 M2 141

44 13.78.1 + 13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer 2083.88 881.35 M2 119.8

45 13.94.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture 512.5 M2 116.5

46 13.81.3 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 559.046 M2 34.6

47 13.82.1 + 13.81.4 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: New steel work (two or more coats) + Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel work (second coat) 559.046 M2 102.8

48 22.8.1 Providing and laying integral cement based water proofing treatment including prepatation of surface as required for treatment of roofs, balconies , terraces etc, consisting of following operations. (a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water -proofing compound cleaning the surfacebefore treatment, (b) Laying cement concrete using broken bricks / brick bats 25 mm to 100 mm size with 50 % of cement mortar 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand ) admixed with proprietary water froofing compound conforming to IS 2545 to reuired slope and treating similary the adjoining walls upto 300 mm height including rounding of junctions, or walls ad slabs. (c) After two days of proper curing applying a secoung coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand ) admixed with proprietary water proofing compound conforming to IS : 2645 andfinally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square. (e) The whole terrace so finished shall beflooded with water for a minimum period of two weeks for curing and for final test, All above operations to be done in order and as directed andspecifed by the Engineer-in-Charge. With average thickness of 120 mm and minimum thickness at khurras point to be 65 .. 866.57 12 M2 850.7

49 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 250 M2 1087.9

50 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C Fixing with adjustable lugs with split end tail to each jamb 557.32 Mtr. 432.6

51 8014 Factory made door frame of size 50x47 mm with wall thickness 5mm made of single piece extruded profile 130.76 Mtr. 388.62

52 8001 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish 37.14 M2 1412.66

53 13.80A.1 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6120.65 M2 81.1

54 18.11.1 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore 50 Mtr. 318.9

55 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 20 mm dia nominal bore

18.10.2 20 mm dia nominal bore 50 Mtr. 289.5

18.10.3 25 mm dia nominal bore 55 Mtr. 399.9

18.10.5 40 mm dia nominal bore 120 Mtr. 589.2

56 18.78 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 180 Mtr. 85.4

57 18.76.1 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks Each 198.5

58 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

18.46.1 15 mm nominal bore 35 Each 158.8

18.46.2 20 mm nominal bore 25 Each 185.6

18.46.3 25 mm nominal bore 25 Each 265.9

18.46.5 40 mm nominal bore 18 Each 419.7

59 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

18.19.1.1 25 mm nominal bore Horizontal 22 Each 506.6

18.19.3.1 40 mm nominal bore Horizontal 4 Each 815

60 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 10 Each 190.1

61 18.15.1 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore 35 Each 303.8

62 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore 20 Each 715.1

63 18.16.1 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore 22 Each 303.8

64 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore 60 Each 500.4

65 18.57.1 Providing and fixing PTMT, push cock of approved quality and colour. 15 mm nominal bore, 98 mm long, weighing not less than 75 gms 22 Each 96.4

66 18.7.4 Proiding and fixing G.I pipes complete with G.I fittings and clamps, i/c cutting and making good the walls etc. 40mm dia nominal bore 104 Each 395.5

67 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and making good the walls andlevel white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 22 Each 4470.9

68 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 6 Each 3723.2

69 17.4.2 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 6 Each 5733.3

70 17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps 30 Each 2530.3

71 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 20 Each 1068.5

72 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 20 Each 713.3

73 17.73.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms 20 Each 397.3

74 17.34 Providing and fixing toilet paper holder :

17.34.1 C.P. brass 22 Each 550.7

17.34.2 Vitreous china 28 Each 332.9

75 19.3.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe 705 Meter 311.4

76 12.79.5.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Band 87.50 110 mm bend 50 Each 132

77 12.79.4.2 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single tee without door 80 Each 190.7

78 12.79.5.1 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Band 87.50 75 mm bend 75 Each 91.8

79 17.70.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle t rap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 30 Each 325.1

80 17.70.2 Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 10 Each 325.1

81 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 25 Each 146.3

82 18.54.2 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long, weighing not less than 99 gms 40 143.3

83 2.6.1 Earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. AH Kinds of soil 19.84 13 M3 314.9

84 19.6 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

85 19.6.1 100 mm dia. R.C.C. pipe 40 Mtr. 378.7

86 19.6.2 150 mm dia. R.C.C. pipe 25 Mtr. 410.7

87 19.6.3 250 mm dia. R.C.C. pipe 50 Mtr. 677.4

88 19.4.3.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 20 Each 1994.1

89 18.32.1 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100A 24 Each 1177.9

90 18.37.1 Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside)with locking arrangement and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100A 16 Each 6849.9

91 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve,with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10(1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominalsize) and inside plastering with cement mortar 1:3 (1 cement : 3coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 100A 20 Each 7210.6

92 19.8.1.1 Extra for depth for manholes : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 12 Mtr. 5660

93 19.8.1.2 Extra for depth for manholes : With Sewer bricks conforming to IS : 4885 10 Mtr. 5757.4

94 19.8.2.1 Extra for depth for manholes : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 5 Mtr. 6776.3

95 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 3 Each 33603.4

96 NS 300 mm dia boring, 100m deep gravelpacked with dtrainer with submersible pump. 2 Set 161705

97 5.29.1 Providng and fixing sheet covering over expansion joints with iron screws as per design to match the colour/shade of wall treatment,

98 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of equired shade to give an even shade New work (three or more coats) 881.35 M2 81.2

99 16.18.1 Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire 5581 Mtr. 15.8

100 16.19 Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. 5389.08 Kg 94.8

101 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round Fixed to steel windows by welding 756 Kg 144.5

102 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: 110.87 M2 83.5

103 2.4 Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with ntermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer – in-charge, including compacting each layer by rolling/ ramming and watering , all complete as per drawing and direction of Engineer -in - charge. 2851 M3 123.9

104 4.1.2 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 269.12077 11.04 M3 4420.8

105 11.1.1 Brick on edge flooring with bricks of class designation 100A including cement slurry etc. complete in cement mortar. 1:4 (1 cement: 4 coarse sand) 277.695 M2 654.5

106 23.10.3 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more tili the grass forms a thick lawn free form weeds and fit for mowing including supplying good earth if needed. In rows 5 cm apart in either direction. 7265.98606 M2 1027.4

107 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS:1239 including Welding, fittings like elbows, tees, flanges,tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

108 2.10.1.2 Excavating trenches of required width for pipes cables, etc, including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil , and then returning the soil as required , in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed , within a lead of 50 m Pipes, cables etc. exceeding 80 mm dia . But not exceeding 300mm dia. 250 M 391.7

109 14.5 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia 4 Set 10478

110 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :

11.6 150 mm dia 2 Set 8241

11.5 100 mm dia 4 Set 6056

11.4 80 mm dia 6 Set 4588

111 10 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/ Stainless Steel cap and chain as required :

0.9 Single headed Gunmetal 3 Set 7245

0.9 Single headed Stainless steel 7 Set 5722

112 17.2 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. "Connections from riser with 25 mm dia stop gun metalvalve & M.S. Pipe and socket." 40 m 3 Set 9616

113 16.2 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless steel (Grade 304) 17 Set 4445

114 NS Providing & fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x50 mm angle iron door shutter with required MS sash bars for glazing completed with locking arrangements, stove enamelled FIRE RED FINISH WITH FIRE HYDRAND written in front. Approximate size 2100x900mm 10 Each 9843

115 NS Providing and placing in proper position Stainless Steel 63 mm dia short size branch pipes with 20 mm dia nozzles with 63 mm instantaneous coupling ISI marked (IS:903) 3 Each 1800

116 NS Providing & fixing brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 and spindle AISI 410) with setting and gland of superiopr quality having minimum working pressure of 20 Kg/cm2.. 25mm dia. 3 Each 1355

117 NS Supply, Installation, testing & commissioning of 25 mm dia air release valves of approved make on the top of each 150 mm dia basement sprinkler ring main as per standard fire practice. 2 Each 1111

118 NS Providing & fixing pressure gauges with isolation cocks and chrome plated copper pipes as hydrant station to read pressure from 0-25 kg/cm2 completed and of dial dia 150 mm 2 Each 1386

119 19.2 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap andchain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe 1 Set 13636

120 0.0 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gunmetal 7 Nos 2393

121 1 (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.

122 1.5 2280 lpm at 70 m Head 1 Set 367039

123 3 a) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. d) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required.e) Suitable cement concrete foundation duly plastered and with anti vibration pads.

(a) 3.2 180 lpm at 70 m Head 1 Set 101470

124 4 Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, entrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. Providing and fixing motor control centres fabricated from 16 gauge M.S. sheet with Powder Coated finish. The control panels should be compatible with H.P. of the motor as under and as per spcifications with automatic star delta starters. (One separate panel to be located in the plant room). One incoming main isolation MCCB TP of Min. 250 Amps. rating. Fully taped aluminium bus bar of required capacity in a separate bus bar chamber. Isolation MCCB for each unit of required rating and with fully automatic starter as per requirement with push button and ON/OFF indicating lights for each unit, for following requirements: One main fire pump of 50 HP. One jockey pump of 10 HP (Each). One Diesel Pump Controlling System Single phasing preventors of suitable rating one for each motor. Rotary type Auto/Manual/ ON/OFF selection switches One 96 mm square panel type voltmeter reading 0-500 V with rotary selector switch for reading voltage between phases. One 96mm square panel type Amp. meter reading 0-500 Amp. for main fire pump and sprinkler pump. One 96mm square panel type Amp. meter reading 0-500 Amp. for each Jockey pumps. Appropriate etched plastic plate for each starter/switch. Colour coded internal wiring from incoming main to bus bar, switch gear, starters, meters indicating lamp etc., complete in all respects.

4.2 450 lpm at 35 m Head 2 Set 84198

125 22 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 2 Each 1442

126 NS Providing, fixing, testing and commissiong of motor control centres fabricated from 16 gauges MS sheet with powder coated finish. The control panels should be comparable with H.P. of the motor as specified. 1 Set 310000

127 NS Providing & fixing heavy duty Aluminum armored cables 1.1 KV grade including necessary support clamps at Ceiling level, connection lugs and double compression qlands, complete in all respects.

(a) Power Cable 3 core 16 Sq mm 60 Each 390

(b) Power Cable 3 core 25 Sq mm 80 Each 760

128 17.2 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

(a) 17.2.1.2 Two Loop Panel. 1 Each 238907

129 17.1.2 Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. 130 Each 1141

130 17.2.7 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 9 Each 3257

131 17.2.14 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 9 Each 3859

132 17.2.15 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required 10 Each 3494

133 17.5.3.2 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sqmm 2450 M 85

134 21.2 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Upright Sprinkler 113 Each 401

135 NS Supply, Installation, Testing & Commissioning of ISI marked (IS:15683) Portable fire extinguisher, of 4.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 6 Each 6126

136 NS Supply, Installation, Testing & Commissioning of ISI marked (IS:2878) Portable fire extinguisher, of 22.5 kg capacity Carbon-dioxide type flat base including valve, discharge hose of not less than 10 mm dia 1m long & complete in all respects including initial fill with CO2 gas confirming to IS: 307-1966 filled to a filling ratio of not more than 0.667of not more than 0.667and wall suspension bracket. 12 Each 16553

137 5.1.1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size) 10.03 M3 5961.9

138 0.662 Supply of Brick bats ……….E/I 8.54 M3 987

139 0L01 Labour for clearing bench desk at suitable place and supply the same afters work all complete job. 9 Each 398.05

140 5.9.2 Reinforced cement concrete work in Vertical and Horizontal fins individually or forming box louvers, facias and eaves boards upto floor five level eciuding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5coarse sand: 3graded stone aggregate 20mm nominal size) Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 35.2 M2 375.1

141 5.9.3 Centring and shuttering including strutting,propping etc. and removal of form for. Suspended floors, roots, landings, balcnies and access platform. 14 M2 437.5

142 13.12.2 15 mm cement plaster on rough side of single or half brick wall of mix. 1:4(1 cement: 4 coarse sand ) 17.6 M2 176.4

143 13.26 Neat cement punning 65.95 M2 40.5

144 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work 32.35 M2 84.5

145 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 17.6 M2 137

146 2.27.1 Extra for every additional lift of 1.5 m or part thereof in : Ali kinds of soil. 12 M3 49.4

147 4.1.5 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 2.067125 M3 3434

148 5.1.2 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring,shuttering,finishing and reinforcement-All work puto plinth level 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 2.44 M3 4688.3

149 11.76 Providing well burnt brick bats or Jhama bricks including ramming properly till compacted hickness is achieved, curing and carriage of water with all leads, making proper slope and blinding the top with cement mortar (1:10) all complete as per building specification and direction of E/I. 0.6 M3 3466.96

150 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6 (1 cement: 6 coarse sand) 8 M2 162.8

151 19.19.4.1 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality EHD - 35 Circular shape 560 mm internal dia 2 Each 1393.2

152 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia 15 Mtr. 486.8

153 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia 15 Mtr. 673.5

154 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 3.537 M3 1188.9

155 24.6 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 3.57 M3 1195.6

156 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 3.57 M3 1195.6

157 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm clamp 1 Each 1531.4

158 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 150 mm dia 1 Each 281.8

159 19.30.1.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone ggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 4 Each 4266.8

160 Carraige of Materials:-

(e) Coarse Sand 1.5 M3 1639.6

161 Extra cost of Materials:-

162 Godrej Mingle Conference table for 24 person 1 Each 326200

163 Godrej Marvel High Back chair 2 Each 27020

164 Godrej Ultima Mid back chair 20 Each 10874

Office Chamber-1 Each

165 Godrej Table T-22 of size 1800W X 750D X 750H 1 Each 23888

166 Godrej Thrill mesh full back chair 1 Each 12520

167 Godrej 7112R Chair 3 Each 7950

168 Godrej Lounge Chair L43 1 Each 38894

169 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Office No-4 Each

170 Godrej Impress table with ERU and pedestal of size 1800 x 900 x 750 1 Each 107326

171 Godrej Thrill Executive High Back Chair 1 Each 24072

172 Godrej Thrill LC Visitor Chair 3 Each 7938

173 Godrej Parto 3str sofa 1 Each 39016

174 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Court Room Each

175 Godrej Finnesse Table of size 1800 x 900 x 740 with pedestal of size 646H x 390W x 440D 1 Each 50158

176 Godrej Thrill LC High back Chair 1 Each 14868

177 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

178 Godrej Thrill mesh full back chair 1 Each 12520

179 Godrej Finnesse Table of size 1200 x 600 x 740 with pedestal of size 646H x 390W x 440D 2 Each 33247

180 Godrej CH7B Chair 4 Each 6224

181 Godrej 3str Chair 5 Each 25980

Accountant Each

182 Godrej Recta Workstation of size 1200*1200*600 with cpu Trolley,KBPT & Pedestal 5 Each 77268

183 Godrej Thrill mesh full back chair 5 Each 12520

184 Godrej Table T-22 of size 1500W X 750D X 750H 1 Each 23305

185 Godrej Thrill mesh full back chair 1 Each 12520

185 Godrej 7112R Chair 3 Each 7950

SDO Chamber Each

186 Godrej Grandeur 10FT Main Table of size 3000x1050x740+ Grandeur 5FT ERU of size 1500x600x610 1 Each 265291

187 Godrej Marvel High Back chair 1 Each 27020

188 Godrej Thrill LC Visitor Chair 5 Each 7938

189 Godrej Parto 3str sofa 1 Each 39016

190 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

191 Godrej Edward Corner table 1 Each 15785

192 Godrej Table T-22 of size 1500W X 750D X 750H 1 Each 23305

193 Godrej Thrill mesh full back chair 1 Each 12520

194 Godrej 7112R Chair 3 Each 7950

Waiting Area Each

195 Godrej 3str Chair 3 Each 25980

196 Godrej Alice Coffee Table of size 1000W x 450H x 650D 2 Each 20960

Record Room Each

197 Godrej 3str Chair 2 Each 25980

Storage Room Each

198 Godrej Multiflex Steel Rack of size 6*36*18 5 Each 9531

First Floor Each

Office Chamber-2 Each

199 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

200 Godrej Thrill LC High back Chair 1 Each 14868

201 Godrej Thrill LC Visitor Chair 3 Each 7938

202 Godrej Parto 3str sofa 1 Each 39016

203 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Office Chamber -3 Each

204 Godrej Impress table with ERU and pedestal of size 1800 x 900 x 750 1 Each 107326

205 Godrej Thrill Executive High Back Chair 1 Each 24072

206 Godrej Thrill LC Visitor Chair 5 Each 7938

207 Godrej Parto 3str sofa 1 Each 39016

208 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

209 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

210 Godrej Thrill LC High back Chair 1 Each 24072

211 Godrej Thrill LC Visitor Chair 3 Each 7938

212 Godrej Parto 3str sofa 1 Each 39016

213 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

214 Godrej Impress table with ERU and pedestal of size 1800 x 900 x 750 1 Each 107326

215 Godrej Thrill Executive High Back Chair 1 Each 24072

216 Godrej Thrill LC Visitor Chair 5 Each 7938

217 Godrej Parto 3str sofa 1 Each 39016

218 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Waiting Area Each

219 Godrej 3str Chair 3 Each 25980

220 Godrej Alice Coffee Table of size 1000W x 450H x 650D 2 Each 20960

Court Room Each

221 Godrej Finnesse Table of size 1800 x 900 x 740 with pedestal of size 646H x 390W x 440D 1 Each 50158

222 Godrej Thrill LC High back Chair 1 Each 24072

223 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

224 Godrej Thrill mesh full back chair 1 Each 12520

225 Godrej Finnesse Table of size 1200 x 600 x 740 with pedestal of size 646H x 390W x 440D 2 Each 33247

226 Godrej CH7B Chair 4 Each 6224

227 Godrej 3str Chair 3 Each 25980

228 Godrej Table T-22 of size 1500W X 750D X 750H 1 Each 23305

229 Godrej Thrill mesh full back chair 1 Each 12520

230 Godrej 7112R Chair 3 Each 7950

Record Room Each

231 Godrej Multiflex Steel Rack of size 6*36*18 5 Each 9531

Second Floor Each

Office Chamber-2 Each

232 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

233 Godrej Thrill LC High back Chair 1 Each 14868

234 Godrej Thrill LC Visitor Chair 3 Each 7938

235 Godrej Parto 3str sofa 1 Each 39016

236 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Office Chamber -3 Each

237 Godrej Impress table with ERU and pedestal of size 1800 x 900 x 750 1 Each 107326

238 Godrej Thrill Executive High Back Chair 1 Each 24072

239 Godrej Thrill LC Visitor Chair 5 Each 7938

240 Godrej Parto 3str sofa 1 Each 39016

241 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

242 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

243 Godrej Thrill LC High back Chair 1 Each 24072

244 Godrej Thrill LC Visitor Chair 3 Each 7938

245 Godrej Parto 3str sofa 1 Each 39016

246 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

247 Godrej Impress table with ERU and pedestal of size 1800 x 900 x 750 1 Each 107326

248 Godrej Thrill Executive High Back Chair 1 Each 24072

249 Godrej Thrill LC Visitor Chair 5 Each 7938

250 Godrej Parto 3str sofa 1 Each 39016

251 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

Waiting Area Each

252 Godrej Alice Coffee Table of size 1000W x 450H x 650D 1 Each 20960

253 Court Room Each

254 Godrej Finnesse Table of size 1800 x 900 x 740 with pedestal of size 646H x 390W x 440D 1 Each 50158

255 Godrej Thrill LC High back Chair 1 Each 24072

256 Godrej Finnesse Table of size 1500 X 750 X 740 with ERU of size 1050 X 450 X 705with pedestal of size 646H x 390W x 440D 1 Each 63260

257 Godrej Thrill mesh full back chair 1 Each 12520

258 Godrej Finnesse Table of size 1200 x 600 x 740 with pedestal of size 646H x 390W x 440D 2 Each 33247

259 Godrej CH7B Chair 4 Each 6224

260 Godrej Table T-22 of size 1500W X 750D X 750H 1 Each 23305

261 Godrej Thrill mesh full back chair 1 Each 12520

262 Godrej 7112R Chair 3 Each 7950

Record Room Each

263 Godrej Multiflex Steel Rack of size 6*36*18 5 Each 9531

Furniture GST FOR Item No (59 to 159) 0.18

Total Amount of SOR & DSR items for all Works

Total Amount of non scheduled item 6639176

Applying Correction factor @ 0.982 on scheduled items for all works

Executive Engineer Vaishali Building Division, Hajipur.

BILL OF QUANTITY

Name of work Estimate for Provision of Electrical Wiring & Electrical Installation in the Proposed Sub-Divisional Office Building at Mahua , Vaishali.

SL.No Code Details of Items Qty Rate Unit Amount

1 1.3.3 Wiring for light point/ fan point/ exhaust fan point/ Call bell Point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable size G.I box etc. as required. Group - 'C'

Tubelight/Batten Holder-253 658 1146 Point

2'× 2' Downlighter/Surface Downlighter- 162

Fan/Wall Fan Point- 176

Exhaust fan- 29

Call Bell Point - 16

Street light- 22

2 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 950 309 Metre

3 1.7 Wiring for circuit/ submain wiring along with earth wire with the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire (For circuit & street light) 1975 201 Metre

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (double socket & computer) 1095 246 Metre

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire(For AC) 540 309 Metre

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire(For LDB & CDB) 289 660 Metre

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire(For PDB) 140 925 Metre

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire(For light VTPN) 65 1312 Metre

1.7.14 4 X 25 sq. mm + 1 X 6 sq. mm earth wire(For power VTPN) 70 2235 Metre

4 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

1.15.1 1 X 1.5 sq. mm( for inverter) 1100 38 p.mtr

5 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular switch box including connection but excluding modular plate etc. as required. 146 358 Each

6 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 70 34 Each

1.31 Supplying and fixing suitable size G.I box with modular plate and cover in front on surface or in recess including providing and fixing 5 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc, as required. 63 414 Each

6 1.32 Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch connection, painting etc, as required. 57 531 Each

7 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 57 1064 Each

8 1.33 Supplying and fixing 2 pin, 5 amp. ceiling rose on the existing junction box/PVC box including connection etc as required. 363 64 Each

9 1.34 Supplying and fixing batten/angle holder including connection etc. as required. 111 80 Each

10 1.37 Supplying and fixing Ding-Dong call bell suitable for single phase, 230 volts complete as required. 16 240 Each

11 1.27 Supplying and fixing following modules G.I. box along with modular base and cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 module (75mm X 75mm) 146 234 Each

12 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 34 683 Each

13 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 16 632 Each

14 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.8.6 8 way, Double door (for Building street light) 1 2591 Each

15 2.9 Supplying and fixing following way three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (But without MCB / RCCB / Isolator)

2.9.1 4 way ( 4 + 12 ), double door, horizontal type 21 4184 Each

2.9.2 6 way ( 4+ 18 ), double door, horizontal type 3 5132 Each

16 2.12 Supplying and fixing following rating, 240 volts, ‘C’ series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6A to 32A amps, single pole 312 237 Each

2.12.2 6A to 32A amps, SPN 1 606 Each

2.12.7 40A to 63A amps, TP 30 1859 Each

2.12.8 40A to 63A amps, TP&N 24 2329 Each

17 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

2.4.3 160 A, 36 KA, FPMCCB (for VTPN) 6 13698 Each

18 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs),Legrand/Scneider.

2.33.1 4 way, Double door, I/C 160A, MCCB 3 12107 Each

2.33.2 6 way, Double door, I/C 160 A, MCCB 3 13710 Each

19 5.3 Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 142 762 Each

20 5.9 Supplying and fixing recess mounted 36 Watt LED flat panel (2'× 2' ) with minimum efficacy 100 lm/w which provides soft light and glare free symmetrical illumination suitable for armstrong / grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 30 2663 Each

21 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

22 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 22 1038 each

23 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 111 250 Each

24 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 146 2482 Each

25 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

8.17.2 380 mm sweep 11 5560 Each

8.17.1 300 mm sweep 18 2572 Each

26 8.19 Supply and installation of 400 mm, 230 V A.C. wall/ cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 30 3670 Each

27 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

7.7.13 150 sq.mm ,3.5 core 120 1373 per.meter

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.1.3 Above 95 sq. mm and upto 185 sq. mm 105 336 per.meter

3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 13721 per set

3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 30 144 meter

3.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 10 195 meter

a 8.11 Supplying and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley internal wiring, earth terminals, Bus bar Chamber, Insulator and complete in all respect etc and panel manufacturers must be approved by CPRI. (But without RYB inicator , ammeter, voltmeter, inter-connection copper conductor cable / solid copper strip, switchgears etc. 36 1809 Sft

b 2.4 Supplying and fixing of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc.as required.

2.4.7 400 A, 50 KA, FPMCCB 1 45651 Each

2.4.4 200 A, 36 KA, FPMCCB 2 16190 Each

2.4.3 160 A, 36 KA, FPMCCB 2 13698 Each

2.4.1 100 A, 30 KA, FPMCCB 1 8172 Each

c 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

d 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.1 6 A to 32 A, double pole 2 667 Each

2.13.4 40 A to 63 A, four pole 2 2324 Each

e 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

7.9.2 4 X 16 sq. mm 10 1018 meter

7.9.3 4 X 25 sq. mm 5 1881 meter

f 1830 50 mm X 5 mm copper strip (2.30 Kg/mtr) 22 871 Kg

g 8.13 Suppy and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc. as required. 1 6536 Each

h 2.2 Providing and fixing MV danger notice plate of 200mm x 150 mm made of mild steel at least 2mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side etc as required. 1 214 Each

FOR LIGHTNING ARRESTER

32 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 6 416 Each

33 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 30 81 Each

34 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 200 102 Metre

35 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 48 145 Metre

4.12 Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of tinned G.I. bolts, nuts, chuk nuts and spring washers etc. complete as required. 30 102 Each

36 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 6 6323 Set

37 3.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 90 195 Metre

FOR CAMPUS LIGHT

38 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

8.22.1 Single arm, 1000 mm 12 24982 Each

39 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required.

9.16.2 For 6/7 metre pole (500mm X 500mm X 1400mm) 12 4398 Each

40 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

41 7.7 Supply of following sizes and core XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium conductor for working voltage upto 1.1 KV as required.

7.7.3 10 sq.mm, 2 core 250 201 Metre

42 7.1 Laying of one number PVC insulated and PVC sheathed/ XLPE power cble of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.1.1 Upto 35 sq. mm 240 315 Metre

43 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 6323 Set

44 3.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing etc. as required. 250 53 Metre

45 1.15 Supplying and connection of following sizes ISI marked FR PVC insulated, single core copper conductor cable etc as reqd.

46 DSR 40 Supplying Installation Testing and Commissioning of 2MP Fixed Lens IP IR Outdoor Bullet Camera having following specifications and features etc :-1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video

1) Signal System: PAL/NTSC, Signal to Noise Ratio: >

47 DSR 50 dB,Camera should display Camera title, Date & Time in live & recorded video2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt Smart IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum):-Video:- H.265 or better, H.264H, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120db or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable(Main stream: 2MP (1920 × 1080)@25/30 fps Sub streams minimum: 720P@25/30 fps). 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, syslog, video encryption, IP/MAC filtering, HTTPS, trusted upgrade, trusted boot. 9) Onboard Storage: Camera should support built-in Micro SD/SDHC/SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device,

40.2.1 2MP @ 25/30fps@1080P (1920×1080) Outdoor Bullet Camera with 2.8/ 3.6mm fixed lens 6 7760 Each

40.2.2 2MP @ 25/30fps@1080P (1920×1080) Outdoor Bullet Camera with 2.7 to 4mm~12 to 13.5 mm or better Varifocal motorized lens 16 19796 each

48 DSR 40.9.1 2 MP IP IR motorized PTZ @ 25/30fps or better camera, Triple streaming , configurable on resolution Main stream: 1080p@25/30 fps Sub streams :1080p@25/30 fps & D1@25/30 fps or better, varifocal lens 4.3-137 mm or better with Automatic & manual Focus Adjustment provisions, 32x Optical zoom and 12x Digital zoom with angle of view 57˚–2.4˚ , PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt, Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s 1 70111 Each

49 40.10.2 16 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16 1 12799 Each

40.11.1 32 Channel Network Video Recorder (NVR) havingdisplay split :- Main screen: 1/4/8/9/16/25/32(36), 2nd screen: 1/4/8/9/16 1 64784 Each

50 40.12 Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

40.12.2 6TB (Terabytes) 1 16376 Each

42.2 PC System Supplying Installation Testing Commissioning of Client PC System comprising of PC Hardware with minimum11th Gen Intel® I7 processor CPU E5-2640 x64 (or better), compatible with dual and quad core processors minimum 3.1 Ghz and 8GB or higher RAM, Hard Drive Space of 256 GB SSD or better, Video card and monitor capable of 1920 x 1080 pixel resolution or better with Ethernet adapter (10/100/1000 Mbps with RJ-45 connector) with 2 GB or higher Graphics card suitable for BMS System complete etc. as required.

42.4.2 42 inch or larger 1 51459 Each 51459

51 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

1.58.1 1 run of cable 1000 52 Metre

52 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

39.23.3 Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.( 15 U Rack) 1 13330 p/meter

39.23.1 SITC OF 6U Network Rack 3 6939 p/mtr

26.1 Online UPS - Input supply: Single Phase, Output Supply: Single Phase. 1 109793 each

LAN & WIFI SYSTEM

53 1.58 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

1.58.1 1 run of cable 3620 52 Metre

54 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

1.27 Supplying and fixing following size/ modules, GI box along with modular base and cover plate for modular switches in recess etc as required.

1.27.1 1 or 2 Module (75mm X 75mm) 181 234 Each

56 DSR Supplying, Installation, Testing and commissioning of following CAT6A Patch Cord should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc. complete as required.

39.13.1 Copper Patch Cords of length 1m (3ft) 181 173 Each

39.13.2 Copper Patch Cords of length 3m (10ft) 181 405 EACH

57 DSR 39.15 Supplying, Installation, Testing and commissioning of CAT6A Copper Information Outlet (IO) with face plate of color as per site requirement, should have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should be from same OEM to maintain compatibility and interoperability etc. complete as required. 181 302 Each

58 DSR Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

39.23.3 15U Rack 4 13330 Each

59 39.21 39.21 Supply and fixing following port Rack Mount loaded LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber

60 39.21.3 24 PORT LIU 8 10049 Each

39.25 Supplying and fixing 42U Rack with 6 inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented 8 32954 Each

39.18 Supplying, drawing, Testing and commissioning of Cat6A UTP 4 pair, 23 AWG solid copper cable in existing conduit/ on surface, U/FTP, LSZH, Non- Plenum, Horizontal (solid) Cable suitable for high speed data networking application supporting upto 10Gbps over a 100 meter channel. The 4 Unshielded Twisted Pairs (UTP) cable with color coded insulation for easy indentification should have FLAME PROPERTIES i.e. Flammability Test - IEC 60332-1, Smoke Density - IEC 61034, LSZH standards compliance: ANSI/TIA-568 C.2, ISO/IEC 11801, IEEE

39.18.4 4 run of cable 362 224 Each

INTELLIGENT FIRE ALARM SYSTEM

67 DSR Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5 % V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications.

28.2.1.2 Two Loop Panel. 1 250420 SET

28.2.3 Supplying, installation, testing & commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as reqd 1 113734 each

68 28.2.4 Supplying, installation, testing & commissioning of analog addressable photothermal detector complete with mounting base 66 3004 Each

69 28.2.5 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required 18 306 Each

70 28.2.6 Supplying, installation, testing & commissioning of intelligent addressable programmable sounder complete as required 36 2787 Each

72 28.2.7 Supplying, installation, testing & commissioning of fault isolator with complete base as required 18 3434 Each

73 28.2.9 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required. 66 2866 Each

74 28.2.10 Supplying, installation, testing & commissioning ofaddressable fire control module complete as required. 12 3156 Each

75 28.2.14 Supplying, installation, testing & commissioning ofaddressable manual call point complete as required. 12 4063 Each

76 28.2.15 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required 18 3682 Each

28.5.1 Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring &LSZH outer sheath complete as required. 480 386 Each

77 28.5.3 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

28.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm 240 97 MTR

SOLAR POWER GENERATION SYSTEM

78 DSR 17.1 Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic Power Plant conforming to MNRE specification as amended, consisting of Mono/Poly Crystalline silicon solar cells, net metering facility, necessary protections, earthing, mounted on Aluminium/GI structure of suitable strength with following components complete as required:- (a) Solar Photovoltaic Module conversion efficiency shall not be less than 16.5% PV modules used in solar power plants/systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. (b) Connections and interconnections by supplying & fixing required size XLPE insulated copper conductor 1.1 kv grade armoured power and control cables between solar modules, main power cable to grid supply PCU unit along with supplying & fixing of necessary channel/conduit lugs and other accessories complete job etc. as required. (Including 5.36% GST) Make-Tata Power/Adani/Vikram solar/Waaree 16 54280 kWp

79 DSR 32.2.3 Split AC ( inverter model,cooling only):- Supply,installation,testing and commissioning of split type wall mounted air conditioning unit of following capacity including indoor,outdoor unit fitted with inverter based rotary compressor,copper condenser and first charge refrigerant R410 A. The condensing unit working range should be capable for providing cooling between -5 deg.C to 50 deg.C & heating within 0 deg. C to 15 deg. C including connection of copper pipe of required size upto 3 mtr,insulation,cordless remote control,auto air swing louvers,connection copper lead wire,condensed water outlet pipe 2 mtr.complete etc. as reqd.Outdoor/indoor units should be of same make(brand).The cost includes contractor profit,labour cess, supply, transportation cost,installation,testing & commissioning cost.

1.1 1.5 TR, 5 star 8 43539 Each

80 Supply installation testing and commissioning of Automatic Voltage Stabilizer of capacity 4 KVA , input voltage - 130 V ±10 % & output- 220V ± 10% of capacity & input Range 130 V to 280 V Model( for 1.5 Ton AC ) 8 4800 Each

81 N/S Supply & fixing of 20/24" ready made M.S. prepainted wall stand structure suitable for 1.5/2.0 TR split AC machine including all accessories. 8 1000 Each 8000

82 N/S Refrigerant:- Supply and additional refrigerant charge of refrigerant R410/410A & equivalent Eco friendly green gas to compensate the additional piping done at site for all systems including testing commissioning as reqd. 2 1695 Kg

83 N/S Drain piping :- Providing and fixing of CPVC, 6 kg /cm2 drain water piping with fittings, support & insulated with 6mm thick closed cell elastomeric nitrile rubber insulation complete as per specifiction.

20 mm dia 80 201 Meter

84 DSR Copper piping:- Supply, installation, testing & commissioning of interconnecting copper refrigerant pipe work (19mm/13mm thick) duly insulated with elastomeric nitrile rubber type tubular insulation between indoor and outdoor units as per specifications. And exposed piping should be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as per specification.

31.14.4 15.9mm O.D. wall thickness more than or equal to 0.8mm (insulation 13mm thick ) 80 615 Meter

31.14.2 9.5mm O.D. wall thickness more than or equal to 0.8 mm ( insulation 13mm thick ) 80 346 Meter

85 N/S 26 Control cable :- Supply & laying , testing & commissioning of following sizes of copper conductor control cables on existing tray including fixing clamps and proper connections to equipment etc. complete as reqd.

26.3 4C × 2.5 sqmm 80 252 Meter

Elect.Executive Engineer

Elect.Work Div.Muz