Repair/ replacement electrical system to Offr Md accn, central institution and other misc items and repair/ rewinding of ceiling fan, exhaust fan and other connected items under GE (East) Ferozepur Cantt

Taking down defective Ceiling fans of size 1200mm sweep from ceiling/ wall height upto 3 mtrs to 5 mtrs, dismantling blades and transporting to work shop/ store, stripping up the fans of any make/ size, checking , testing, over hauling , greasing , including taking out u/s spare parts and replacing with new parts, reassembling including fixing of blades, replacement of blade screws, split pins (where required) and testing for its satisfactory running, hanging the fans in position complete all as specified and directed. Note : (i) Replacement of unserviceable spare parts such as ball bearing, bushe, capacitor, fan blade, canopy and shaft shall be measured and paid separately as supply only under relevant item of Sch 'A' (ii) Rewinding shall be measured and paid separately. (iii) The cost cleaning, greasing & refixing in position upto height 3mtrs to 5 mtrs is deemed to be inclusive in the unit rate quoted by the contractor.

All as per item No. 1 here in before but Ceiling fan of size 1400 sweep complete all as specified and directed.

All as per item No. 1 here in before but Cabin fan/ Bracket fan/ wall mounted fan size 16" sweep complete all as specified and directed.

All as per item No. 1 here in before but Air Fresh fan/ Exhaust PVC of size 200mm/ 230mm sweep complete all as specified and directed.

All as per item No. 1 here in before but Exhaust fan of size 250/300 mm sweep (Steel body/ PVC body) complete all as specified and directed.

All as per item No. 1 here in before but Exhaust fan of size 380 mm sweep complete all as specified and directed.

All as per item No. 1 here in before but Exhaust fan of size 450 mm sweep complete all as specified and directed.

All as per item No. 1 here in before but Air circulator/ Pedastal fan of size 25" sweep complete all as specified and directed.

Taking out the old burnt out winding from the fan, rewinding with super enameled superior quality copper conductor winding with similar gauge & size as per original incl sleeves, varnishing etc Ceiling fan of size 1200mm sweep complete all as specified & directed.

All as per item No. 9 here in before but Ceiling fan of size 1400 sweep complete all as specified and directed.

All as per item No. 9 here in before but Cabin fans/ Bracket fans/ wall mounted fans size 16" sweep complete all as specified and directed.

All as per item No. 9 here in before but Air Fresh fan/ Exhaust PVC of size 200mm/ 230mm sweep complete all as specified and directed.

All as per item No. 9 here in before but Exhaust fan of size 250/300 mm sweep (Steel body/ PVC body) complete all as specified and directed.

All as per item No. 9 here in before but Exhaust fan of size 380 mm sweep complete all as specified and directed.

All as per item No. 9 here in before but Exhaust fan of size 450 mm sweep complete all as specified and directed.

All as per item No. 9 here in before but Air circulator fans/ Pedastal fans of size 25" sweep complete all as specified and directed.

Supply only Ball bearing No.6201/ 6202 suitable for Ceiling fan/ Exhaust fan/ cabin fan/ Air circulator complete all as specified and directed.

Supply only Bush suitable for any type of ceiling fans, exhaust fan, cabin & Air circulator including mechanical laithe work etc complete all as specified and directed.

Supply only shaft suitable for any type of ceiling fan, exhaust fan, cabin & Air circulator including mechanical laithe work etc complete all as specified and directed.

Supply only Fan capacitor of 2.5 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan capacitor of 3.15 MFD, capacity ISI marked madeup of plastic with copper terminal wire incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan Motor run capacitor of 4.0 MFD, capacity ISI marked madeup of plastic with terminal lugs incl MS/PVC clamp of required size complete all as specified and directed.

Supply only Fan blades with suitable screw for 1200mm sweep ceiling fan complete all as specified (set of three blades) complete all as specified and directed.

Supply only Fan blades with suitable screw for 1400mm sweep ceiling fan complete all as specified and directed. (set of three blades).

Supply only plastic canopy (set of 02) with screw suitable for 1200/1400mm sweep complete all as specified and directed.

Supply only exhaust fan motor 0.12 HP, suitable for upto 300mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed complete all as specified and directed.

Supply only exhaust fan motor 0.16 HP, suitable for 380mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B42, double bearing, trusted copper winding, high speed complete all as specified and directed.

Supply only exhaust fan motor 0.25 HP, suitable for 450mm sweep size of exhaust fans, AC single phase, 50 Hz, 1500 RPM, frame- B48, double bearing, trusted copper winding, high speed complete all as specified and directed.

M&L for two coat of painting for ceiling fans complete with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc complete all as specified and directed.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 300mm sweep complete including removal of old U/S frame complete all as specified and directed.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 380mm sweep complete including removal of old U/S frame complete all as specified and directed.

Supply and fixing of Exhaust fans MS frame complete with legs (set of four) including rubber as per sample for 450mm sweep complete including removal of old U/S frame complete all as specified and directed.

Supply and fixing in replacement of fan blade for Exhaust fan 300 mm sweep complete all as specified and directed.

Supply and fixing in replacement of fan blade for Exhaust fan 380 mm sweep complete all as specified and directed.

Supply and fixing in replacement of fan blade for Exhaust fan 450 mm sweep complete all as specified and directed.

Supply and fixing in replacement of hanging clamp of required size with rubber real nuts, bolts including spring washers and locking of splite pin of suitable size for 1200/1400 sweep ceiling fan complete all as specified and directed.

S&F three core FR PVC Insulated & overall round sheathed flexible with PVC, colour of cores are Red, Black & Yellow/ Green is for earthing. Sheath colour is Black of cable size 23/0.0076 complete all as specified and directed.

S&F in replacement of down rod 30cm long incl cutting holes etc suitable for ceiling fan complete all as specified and directed.

S&F in replacement of down rod 60cm long incl cutting holes etc suitable for ceiling fan complete all as specified and directed.

S&F in replacement of down rod 90cm long incl cutting holes etc suitable for ceiling fan complete all as specified and directed.

S&F in replacement of down rod 1.2mtr long incl cutting holes etc suitable for ceiling fan complete all as specified and directed.

Taking down carefully existig copper/ alumn point wiring for light/ fan/ bell/ socket 5/15 Amp points complete with fitting and fixtures such as Switches, Sockets, Ceiling Rose, Lamp Holder and bracket fittings with Battens/ Conduits/ Wires and making good the disturbed surfaces of walls and roofs etc to match with existing surface complete all as specified and directed.

Taking down carefully unserviceable main switches and distribution boards (single phase or three phase) of any capacity with Isolators/ MCBs/ MCCBs complete all as specified and directed.

Taking down carefully old unserviceable sub main wiring and making good disturbed surfaces and matching with existing complete all as directed and specified

M&L Point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends, reducers, spacers, saddles, junction boxes, bakelite sheets and various sizes hylam sheets for mounting switch/ sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed, stranded (Green colour) connected to common earth dolly complete all as specified for following :- (a) One light/ fan/ bell/ Bldg security light point controlled by one single pole one way switch.

All as per item No. 45 as above but one 3 pin, 5 Amp, socket outlet on the independet board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 45 as above but one 3 pin, 5 Amp, socket outlet on the same board controlled by one single pole one way switch board complete all as specified and directed.

All as per item No. 45 as above here-in-before but wiring with 2.5 sqmm copper cable and 2.5 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

All as per item No. 45 as above here-in-before but wiring with 4 sqmm copper cable and 4 Sqmm copper cable as continuous earth wire for one 6 pin 6/16 Amps socket out let on independent board complete all as specified and directed.

S&F 6 amps, single pole, one way switch urea back piece (IP20), 240V, 50Hz, white in colour, duly ISI marked complete all as specified and directed.

S&F Bell push flush, type 6 amp single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.

S&F 6 Amps Socket 3 pin, white in colour, duly ISI marked complete all as specified and directed.

S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.

S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.

S&F batten holder, 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.

S&F rotary stepped type electronic fan regulator compatible for BLDC for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, deluxe, white in colour, duly ISI marked complete all as specified.

S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified and directed.

S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.

S&F Door Bell Ding Dong single phase 240 volts, white in colour, duly ISI marked complete all as specified and directed.

S&F LED sleeky bldg street light (Lens) fitting toughened glass of 35 watts, 6000K, including GI bracket bend to shape made out of GI pipe light grade of suitable size and length etc complete with MS clamps, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S. sheet, powder coated, partly embedded in wall, IP-43 protection, VTPN DB with 200 Amps rated bus bar, 4 way, 415 volts, vertical type, dust and vermin proof, suitable for incorporation of MCCBs/ MCBs, factory made, including thermal based release adjustable type 4 pole 100 Amps, 50 Hz, 415 Volts with rupturing capacity 16 KA and making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet, powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-43 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly partially immersed in wall, factory made, including making good distrubbed surfaces with matching colour, complete all as specified and directed.

S&F MCB SPN, 40A-60A, 240 volts, "C" series, 10KA duly ISI marked, complete all as specified and directed.

S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and directed.

S&F Sub main wiring with two single core 2x6 sqmm PVC FRLS insulated and unsheathed stranded copper conductor alongwith earth wire 6 sqmm drawn in 25 sqmm PVC rigid conduit connected to main board complete all as specified and directed. (Two number cable and one number earth wire shall measured together as unit length).

S&F 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of 16 Sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of 16 Sqmm complete all as specifed and directed.

Please Enable Macros to View BoQ information