GE (N) P/TOKEN- 82 OF 2025-2026 REPAIRS TO ROOF SHEET, CEILING AND CERTAIN MISC REPAIRS AT SUB AREA, STN CELL, SCLU, IS GP, SWAC ,EME BN ,101 TA BN, SCSR ETC, MD AND OTHER OTM ACCN IN THE AREA OF AGE B/R (EAST) UNDER GE (NORTH) PUNE

Dismantling asbestos cement (plain, corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

M&L for 6mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L-type or J-type or cranked hook bolts etc. complete all as specified and as directed.

All as per serial item No 2 here-in-before but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

M&L for 6mm thick asbestos cement, two piece adjustable plain serrated ridge for corrugated or semi corrugated sheets fixed with L-type or J-type or cranked hook bolts etc. all as specified and as directed.

All as per serial item No.4 here-in-before but except sheet complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

Dismantling single layer Mangalore pattern tiles or similar tiles in roofing including necessary fillets and similar items and taking out from the site without disturbing existing false ceiling complete all as directed.

M&L for roof tiles Mangalore pattern interlocking at side joints, laid dry class A-A complete all as specified and as directed.

Fixing only roof tiles Mangalore pattern interlocking at side joints, laid dry complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)

M&L for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and as directed.

Fixing only for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting , any gauge, thickness including Nainital or similar pattern roof coverings complete all as directed.

S&F for 0.63mm thick Plain Galvanised mild steel sheeting for mangalore roof, ridges, valley gutters drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 , both sides inclusive complete all as specified and directed.

S&F for 0.63mm thick Corrugated Galvanised mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in mangalore roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Fixing only 0.63mm thick plain/corrugated galvanised mild steel sheeting as in ridge with grade of zinc coating120 gms/ sqm, both sides inclusive complete all as specified and as directed. (Note : Serviceable tiles obtained from dismantled shall be re-used.)

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling battens of tiles of any size and description spaced exc. 15cm including tilting fillets complete all as directed.

S&F for 2nd class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete all as specified and as directed. (NOTE : Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.4 sqm each).

All as per serial item No.18 here-in-before but except battens complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

Dismantling timber in scantling, fillets, rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work in any position complete all as directed.

M&L for 2nd class hard wood, clean sawn, in scantling timber unframed work complete all as specified and as directed.

All as per serial item No.21 here-in-before but except timber complete all as specified and as directed. (Note : Serviceable materials obtained from dismantled shall be re-used.)

Dismantling timber scantling in fillets, rails, rafter, purlins etc, under 40 Sqcm in section, unframed work complete all as directed.

M&L for 2nd class hard wood plain fillets, rectangular in section, clean sawn, bull nosed splayed chamfered or rounded on one edge or face, secured with nails, sectional area exc.13 Sq.cm and not exc. 25 Sq.cm complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 as in batterns for roofs, post, purlin, rafter etc complete all as specified and as directed.

S&F for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe 410-W(Gde-E-250) quality -B (like rafter & purlins etc) complete all as specified and as directed.

S&F for rolled mild steel frame work as in grills, doors or gates of angle or other sectioin with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings also fastenings and fixing etc. conforming Fe 290-W(Gde-E-165) quality -B complete all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surface including preparation complete all as specified and directed.

Dismantling of eaves/ boarding any description and in any position fixed with nails complete all as directed.

M&L for Eaves/ weather boarding with 10mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including two coat of synthetic enamal paint over one coat of suitable primer complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco

M&L for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in coping on top of wall, bed blocks, lintel band upto 1.5 m. span and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work all as specified and as directed.

M&L for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparing surface and make surface free from loose particles, oil stains etc and applying one coats of cement based paint on wall complete all as specified and as directed.

M&L for preparing surface and make surface free from loose particles, oil stains etc and applying one coats of oil bound distemper on wall complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of wall/ceiling board of any description and any thickness including cover fillets etc complete all as directed.

M&L position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600mm, with GI frame work main runner 38 x 24 x 3600mm, cross 'T' 25 x 24 x 60mm/25 x 24 x 1200mm and wall angle 24 x 24 x 2540mm (thickness of the material of 0.30mm ), using 8-9mm thick ceiling panel laminated with PVC film on front face and foil back available in due drop texture as per IS-2095, part-I-1996, fixed in the grid of T-grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butterfly clips all as specifed and directed by Engineer- in -charge. Make:-Gyproc/Armstrong.

M&L for 4mm thick everest fibre cement false ceiling board of size 595mmx595mm fixing on 'T' grid incl suspended ceiling grid system 2430 Main runner(10') of size 1000mm, cross Tee (2') of size 600mmx600mm and wall angle(10') of size 3050mm x 3050mm incl taking down old one complete all as directed

M&L for plaster of paris sheets false ceiling with 600 X 900 X 10 mm thick, sheet fixed with machine screws on and including grid system of GI channel 18 gauge thick, main joist placed at 750mm centers, secondary joists placed at 450 mm centers, GI angle suspenders from roof and treating the plaster of Paris sheets with thin layer of POP with gypsum binder, sanding the surfaces till smooth surfaces is obtained and finally applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.

M&L for preparation of wood surfaces and wood based material new or old of any description and girth not other wise described and treated with one coat of creosote oil complete all as specified and as directed.

M & L for rainwater gutter system of SWR pipe 180 mm nominal dia. half round type alongwith all accessories/ fittings complete all as specified and directed. Make : Prince Model HPR18R or equivalent of Infra, Supreme, Kisan, Astron Plastic, Amogh Plast, Finolex

M & L for rainwater gutter system of SWR pipe 250 mm nominal dia. half round type alongwith all accessories/ fittings complete all as specified and directed. Make : Prince Model HPR18R or equivalent of Infra, Supreme, Kisan, Astron Plastic, Amogh Plast, Finolex

Demolition of brick work /stone boulder/ block masonry built in cement mortar .

M&L for Pre-cast cement concrete block masonry with solid blocks type C-1, 1:3:6 (20mm graded agg) exc10cm in width and setting in mortar complete built in CM 1:6 in any description complete all as directed

Labour only for precast cement concrete block masonry with solid blocks,exc. 10 cm in width and setting in mortar,except blocks. straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water incl necessary scaffolding etc complete all as specified and directed

Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, plaster with two coats of OBD of any tint over a with putty all as specified and directed.

M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and fair without using extra cement with 2% of WPC on cement incl necessary scaffolding etc upto 12 mtr height complete all as directed.(Note:WPC shall be measurned and paid in separatetly) with two coats of cement base paint on new surface all as specified.

Supply only integral water proofing compound

Excavation of post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as directed

M&L for PCC 1:4:8, type D-2(40mm graded crushed stone agg) as in foundations,filling and mass concrete complete all as directed.

S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed

Supply only chain link MS galvanisd fencing, any size or type complete all as specified and direced

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc complete all as specified and directed

M&L for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed

S & F in repair for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in aprons, barriers, gates and similar works etc (each line wire to be measured) complete all as specified and as directed

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.