Supplying installation testing and commisioning of additional electrical diesel pump for Buniyadabad pipeline under PHED, APWD Prothrapur

Supplying, Installation, Testing and commissioning of 01 No. 250 KW/335 HP, 3-Phase, 4 - pole, 415 Volts ± 10 %, 50 Hz ± 5 %, 1500 RPM, with 'F' Class insulation and temperature rise limit upto class 'B' and has to be Totally Enclosed Fan Cooled/IE2/HFM Squirrel cage induction motor similar to Kirloskar / Crompton Greaves make coupled with Water Pump similar to RKB 200 /37, 4-Stage of Kirloskar make or equivalent with C.I make, C.I impeller discharge of 468 Cum/Hr at a head of 110.00 Mtrs. including supplying and installation of base frame with foundation bolts and nuts, coupling assembly, coupling guard etc. as required.

Supplying, Installation, Testing and Commissioning of 01 No. 410 HP Diesel oil engine designed to run to 1500 RPM , similar to Greaves Make , Model -TBD3V8MKII coupled with water pump similar to RKB 200/37, 4-stage of Kirloskar make or equivalent with C.I make, C.I impeller discharge of 468 Cum /Hr at a head of 110.00 mtrs. including supplying of 02 Nos 12V, 180 AH battery and supplying and installation of basis frame with foundatilon bolts and nuts, coupling assembly with gaurd, fuel tank assembly for 8:00 . Hrs. run along with stand and fuel line hose and Kirlosmart Remote Monitoring unit etc as required.

Supplying, Installation, Testing and Commissioning of Fully Automatic Star - Delta Starter Panel suitable for 250 KW/335 HP, 3-Phase, 4 - pole, 415 Volts ± 10 %, 50 Hz ± 5 % complete with inter connections with 25 mm X 5 mm copper strip etc. as required. The FASD Starter comprising with start & stop push button with following electrical accessories and should have inner earthing, one coat of primer and 2 coat of finishing water proof paint etc.as required and embedded its four legs in the ground at the depth of 15 .00 cm with in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size). (a). Three Pole Power Contactor (2NO+2NC), Type ML-12, L&T Make --- 03 Nos. (b). Thermal overload relay, Type MN12 (CT operated), Range (270 A to 450 A) --- 01 No. (c) . Single Phasing Preventor Make L&T, Model SM 301 --- 01 No. (d). Electronic Star - Delta Timer, Make L&T, Model ST 100 -- 01 No. (e ). Load Isolator 40 A, 415V, 3- pole -- 01 No.

Supplying, Installation, Testing and Commissioning of indoor type floor mounted cubical panel board made of not less than 1.10 mtrs. X 0.60 mtrs X 0.40 mtrs. non extendable type L.T - 3 phase 440V, 630 Amps (Thermal - Magnetic Release) with both side open i/c front double hang shutter with locking arrangement with locking arrangement made of 18 SWG thick CRCA sheet in different compartment to accommodate switch gear, i/c supplying and fixing of 01 No. 630 A, four pole MCCB (L&T Make, DN3 630S), 01 set of Bus bar (RYBN), Multifunctional meter, 03 Nos. C.T coil class B (800:5) and indicating lamps (RYB) . The panel should have inner earthing, one coat of primer and 2 coat of finishing water proof paint etc.as required and embedded its four legs in the ground at the depth of 15 .00 cm with in cement concrete 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).

Supplying of following size of PVC insulated and PVC Sheathed/ XLPE Armoured 1.1 KV grade Aluminium conductor cable conforming to IS:7908 (Part - I ) 1988. (a). 400 Sq.mm, 3 ½ - Core Cable

Spplying and drawing 6 X 400 Sq.mm, Single Core of PVC insulated and PVC Sheathed/ XLPE Un - Armoured 1.1 KV grade Aluminium conductor cable conforming to IS:7908 (Part - I ) 1988 in the existing DWC HDPE pipe as required.

Supplying of 90 mm dia (OD-90 mm & ID-76 mm (nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a). 90 mm dia (OD-90 mm & ID-76 mm (nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. (a). Above 185 sq. mm and upto 400 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. (a). Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)