Construction of toilet building and Sanitary Workers Breakfast Shed at Muthapudupet MCC Shed in ward 2

Amount

Earth work excavation for foundation in Hard stiff clay,stiff black cotton, hard red earth ,shales murram,gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil,wets and,or silt not under water,light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10cum ( B.D PG NO 18)

Supply, delivery and filling with stone dust from approved quarry in layer not more than 15 cm thick including watering with all layers and consolidation complying with standard specifications including cost and conveyance of sand at site and labour chrages and all other incidental charges etc., complete as per standard specifications

Plain Cement Concrete 1:4:8(one cement four fine aggregate sand eight coarse aggregates) using 40mm size ISSHBG metal including cost and conveyance of all materials to site and including for the mixing,laying and labour charges and all incidential charges such as water providing etc.,complete as per standard specification ( B.D PG NO 21)

Supplying ,erecting STEEL CENTERING for sides and soffits inc supports and strutting for plain surface such an reinforced cement concrete slasp rectangualar beams tee or el beams lintels , bed blocks staircase in all floors of any height (the retrived materials should be taken back by the contractor) the payment for cenetering shall be given by the concrete is laid (For Plinth Beam) ( B.D PG NO 24)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supplying fabricating and placing in position steel reinforcement using MS or RTS rods for all works including cost of steel binding wire also.( B.D PG NO 32)

Brick work in CM 1:5 (one cement five sand) using IInd Class Moulded bricks of size 9''x4 3/8"x 2 3/4" including curing etc,complete For super structure B.D pg.No : 32

Plastering with cement mortar 1:3, 20mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) ( B.D pg.No : 38)

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) ( B.D pg.No : 38)

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc.,complete complying with standard specification. ( B.D pg.No : 19)

Paving the floor with Vitrified double charged of approved quality and colour of size 600x600x8mm thick of approved make,quality and colour in all floors over abaselayer of cement mortar1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour&quality of tiles should be got approved by Municipal Engineer before use on work B.D pg.No : 45

Wiring with 2 x 2.50 sqmm PVC insulted single core unsheathed copper conductor cable of 1100 V grade in suitable PVC riged pipe concealed in wall and celling with PVC accessories in flush with wall with 150 x 100 x113 mm TW Switch Box with 3mm hylum sheet cover for 15A 3pin non interlocking CS plug with continous earth wire connection of 14 SWG TC wire for Light Point and Fuse Point

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Supplying and fixing in position Indian water closet of size 580 X 440mm ,white glazedear then ware of approved quality with' P'trapor'S 'trap confirming to IS:2556-Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (one part of lime ,two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to castiron soil pipes/PVC pipes by dismandling brick masonry, reinforced cement concrete roof /floor slab and making good the disturbed portion to original condition without leakageetc.,complete complying with standard specifications and as directed by the departmental officers. B.D pg no62.

Supply of PVC Specials for water supply arrangements (TWAD PG NO 164)

20 mm PVC. Pipe

20 mm PVC Tee

20 mm PVC Coupling

20 mm PVC Elbow

1/2'' PVC tap

Supply and delivery and fixing of HDPE tankas per IS 12701 /1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., (TWAD PG NO 63)

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

V.S.A.Enterprises (BID ID -1533954)