Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC M S WALIA TRADING CO VILLAGE VASUDEVPURA NALAGARH ROAD VILLAGE VASUDEVPURA PINJORE HARYANA 134102 | PANCHKULA | HARYANA | 134102 | L1 | Accepted-AOC Lowest bid. | |
| 2 | L2₹46.9 L+₹64,185 (1.39%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bid. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SOUTH MAMUN
GE SOUTH MAMUN PATHANKOT-145001
CERTAIN REPAIR AND MAINT TO MD ACCN IN BANA ENCLAVE UNDER AGE B/R-II OF GE(SOUTH) MAMUN
2024_MES_664539_1
GE(S)/M-28/2024-25
Open Tender
Miscellaneous Works
Item Rate
270 days
GE SOUTH MAMUN
AS PER NIT
10 documents required · 10 mandatory
₹500
GE SOUTH MAMUN
₹90,000
Yes
14 Nov 2024
9 Jul 2024
12 Sept 2024
9 Jul 2024
4 Sept 2024
23 Jul 2024
Amount
Taking down cement plaster of any description on brick/stone walls / concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) area exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified and directed.
Taking down shutters of any description area exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.
Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips complete all as specified and directed.
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to a store and rubbish off premises complete all as specified and directed.
M&L for rendering 10 mm thick plaster in cement mortar 1:6 on fair face of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.
M&L for brick work with fly ash bricks, old size, as in half thick brick walls, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed.
M&L for non-skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match, laid over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed .
M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, etc., set and jointed in neat cement slurry and pointed with coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.
M&L for machine cut Kota stone slab flooring 18-20mm thick, size of each slab not less than 55cmx55cm, with 75mm wide white marble border alround, laid over & including 20 mm thick screed bed in cement mortar 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing using grinding macine to yield mirror finish complete all as specified and directed.
S&F pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
S&F Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.
M&L for preparation of new or previously untreated steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately) Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm thickness comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately)
S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.
S&F 150 mm long aluminium handle cast type anodised complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or rubber beading in aluminium frame in square not exc. 0.5 sqm in each pane complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or rubber beading in aluminium frame in square exc. 0.5 sqm in each pane complete all as specified and directed.
S&F in repairs for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
S&F in repairs for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.
S&F in repairs for Shower rose swivel type brass chromium plated any size including fixing to steel pipe or unions complete all as specified and as directed.
S&F in repairs Stop valve/Angle valve (ISI Marked), fancy type cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore ccomplete all as specified and as directed.
S&F in repairs for stop valve (ISI Marked) 15 mm bore fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.
S&F in repairs 15mm bore bib tap, with flange, cast copper alloy fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.
S&F in repairs Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but inclluding vitreous china pedestal and PVC waste pipe with union, 32 mm dia complete all as specified and directed.
S&F in repairs Centre hole basin mixer chromium plated without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
S&F in repair wall mixer chromium plated without popup waste system with 450mm long braided hoses cast copper alloy for iron pipes 15 mm bore, screwed for iron pipe and fixed and all as specified and directed.
S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white complete including fixing to trap including PVC seat and cover with hinging device for pedestal pan and connecting etc, complete all as specified and directed.
S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour complete all as specified and directed .
S&F in repairs PVC flushing cistern, 10 litre capacity, low level, push botton type dual flush type, PVC valveless, syphonic action type, white, with inlet, ball valve, float and handle incl brackets & flush pipe PVC 32 mm dia complete all as specified and directed.
S&F in repairs Jet Spray (with 1.50 Mtr tube), fixed to EWC and angular stop cock/valve, complete all as specified and directed.
S&F PVC connection 15 mm bore with PTMT nuts of length 600 mm long complete all as specified and directed.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. drilled for fixing of steek sheeting or other covering. Door etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed.
S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed. Note:- (i) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work, in case ISI approved firm material is approved.
S&F continuous (piano) hinges, mild steel, bright finish width of flaps (when open) 30 mm complete all as specified and directed.
S&F hasp and staple 100 mm in size, aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed.
S&F in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410mmx 330mmx 180mm complete all as specified and directed.
S&F in repairs stainless steel kitchen plate rack of size 750 X 900 mm of approve make fixed with mild steel screw complete all as specified and directed.
S&F in repairs 32 mm dia, corrugated waste pipe suitable for WHBs/sinks including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
S&F 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F in repairs Stainless steel Grating 150mm dia complete fixing in floors complete all as specified and directed. .
S&F in repairs Stainless steel Grating 150mm dia with waste hole complete fixing in floors complete all as specified and directed. .
M&L for complete removal of existing treatment, preparation of surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls by applying 2mm thick wall care putty making the surface even & smooth and applying two coats of oil bound distemper, complete all as specified and directed.
Refixing of wire mesh door shutter area exc. 1.0 Sqm but n exc. 2.0 Sqm in chowkhats of same opening including welding butt hinges and easining as per site requirement complete all as specified and directed.
M&L for PCC 1:3:6 type C-0 (using 12.50mm graded aggregate) as in filling of back of pressed steel chowkhats including necessary form work complete all as specified and directed.
D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3080130)
Bidder Name
Walia trading co
D S INFRASTRUCTURE AND DEVELOPERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .