Fire Fighting System in Judicial Complex at Kaithal In Kaithal Distt

Amount

Providing laying ,testing & commissioning of ( C ) class heavy duty MS pipe conforming to IS 3589/ IS 1239 including Welding ,fittings like elbows ,tees ,flanges,tapers ,nuts bolt ,gaskets etc . And fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complite as required . MAKE HISAR JINDEL , TATA ,PARKSH SURYA . (A) 250 mm dia ( MINIMUM 6.3 MM THIKNESS) (DSR 7.10)

200 mm dia ( MINIMUM 6.3 MM THIKNESS ) (DSR 7.9)

100 mm dia (DSR 7.7)

80 mm dia (DSR 7.6)

25 mm dia (DSR 7.1)

Providing laying ,testing & commissioning of ( C ) class heavy duty MS pipe conforming to IS IS 1239 /3589 i/c fitting like elbows ,tees ,flanges ,tapers ,nuts bolt , gaskets etc .in ground including welding ,excavation & providing cement concrete blocks as supports , anticorrosive treatment with coaltar /asphalt tape as per IS 10221 reffilling the trench etc .of following sizes complete as required make PYPECOAT/COALTEK (A) 150 mm dia (MINIMUM 6.3 MM THIKNESS) (DSR 6.2)

Supplying and fixing single headed internal and external yard hydrent valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 ( TYPE -A ) with blank stainless steel cap and chain as required ( MAKE: TYCO /SAFEX/ HD/ KARTAR ,FIRE CUT, NEW AGE ) (DSR9.2)

SITC of INTERNAL OR EXTERNAL weather proof standard fire hose cabinet (750 mm x 600 mm x 250 mm deep) for yard hydrants made of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm thick glass) shutter including necessary locking arrangement by allan key, stove enamelled Fire red finish with " Fire Hose" marked on front, suitable for housing 2 nos. Hose pipe, 1 No. branch pipe & nozzle spanner. (For external hydrant system) (MAKE: / FIRE CUT / MINIMAX / NEW AGE/ SUPEREX / KARTAR ) (NS)

Supplying and fixing 63 mm dia ,15 m long RRL hose pipe with 63 mm dia male and femaile coupling duly bond with GI WIRE , RIVETS ETC . CONFORMING TO IS 636 (Type -A ) as required . (MAKE: / FIRE CUT /NEWAGE/ / MINIMAX/,KARTAR/ SAFEX. (DSR 16.2)

Supplying & fixing 63 mm dia Stainless Steel (grade 304 ) short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 sutitable for instantaneous connection to iIS 903 sutitable for instantaneous connection to interconnect hose pipe coupling as required (MAKE: / FIRE CUT /NEW AGE/ KARTAR / MINIMAX / SAFEX ) (DSR 18.2)

Supplying and fixing firsr-aid Hose Reel with MS construction spray painted in post office red , conforming to IS 884 complite with the follwing as required . 20 mm nominal internal dia water hose thermoplastic (Textile reinforced ) type-2 as per IS 12585. 20 mm normal internal dia gun metal globe & nozzle. Drum and brackets for fixing the equipmets on wall.connections from riser with 25 mm dia stop gunmetal valve & MSpipe and socket ((MAKE: FIRE CUT / NEW AGE/ MINIMAX / KARTAR/ SAFEX) (DSR 17)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd , for sutitable dia MS pipe connection conforming to IS 904 AS REQUIRED .4 WAY -150 mm dia MS pipe Make Minimax, FIRE CUT,KARTAR , NEW AGE, SAFEX .MINIMAX (DSR 19.2)

Providing , installation , testing and commissioning of stainless steel Y- strainer fabricated out of 1.6 mm thick stainless steel, grade 304 , sheet with 3 mm dia hole with stainless steel flange . 250 mm dia .MAKE-KARTAR/LEADER,NEW AGE ,SANT (DSR 15.5)

Supplying and fixing air vessel made of 250 mm dia ,8 mm thick MS sheet , 1200 mm in height with air release valve on top and flanged connection to riser , drain arrangement with 25 mm dia gun metal wheel valve with required accessories , pressure gauge and paintingwith synthetic enamel paint of approved shade as required . MAKE FIRE CUT / HYDROTECH (DSR 20).

SITC OF Providing & Fixing of air vessel 450/1600 0mm dia,height with dish top made in 6mm thick ms pipe complete with 20 mm dia brass air valve , 200mm dia stop valve , pressure gauge ,stop cock, nipple for fire control room MAKE FIRE CUT / HYDROTECH . (NS)

Supplying and fixing orifice plate made out of 6mm thick stainless steel ( Grade 304 ) with orrice of required size to be fitted between flange & landing valve of external and internal hydrent to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required .MAKE-SANT,LEADER,KARTAR / SAFEX OR EQULENT (DSR 13)

Supplying , fixing , testing and commissioning of butterfly vave of PN 1.6 rating with bronze /gunmetal seat duly ISI markedcomplete with nuts , bolt , washers ,gaskets conforming to IS 13095 OF FLOWING SIZES AS REQUIRED MAKE-KARTAR,/ZOLOTO/ CASTLE,KIRLOSKAR, NEW AGE ,SANT ,OR EQULENT (A) 250 mm dia (DSR11.8)

150 mm dia (DSR11.6)

100 mm dia (DSR 11.5)

80 mm dia (DSR 11.4)

Providing , installation , testing and commissioning of non-return valve of following sizes confirming to IS 5312 complete with rubber gasket . GI bolt ,nuts , washers etc .as required MAKE-KARTAR,/ZOLOTO/ CASTLE,KIRLOSKAR, NEW AGE ,SANT ,OR EQULENT (A) 250 mm dia (DSR14.9)

150 mm dia (DSR 14.7)

100 mm dia (DSR14.5)

providing & fixing of pressure switch in M.S pipe line including connection MAKE -INDOFUS/DANFOS/SWITZER) (DSR22)

SITC of fire brigade draw off connection confirming to IS : 4038-1986 with 150 mm Non return valve/ strainer incluiding necessary fittings the word FIRE BRIGADE DRAW OFF to be painted on the box complete all as specified and directed.(MAKE: FIRECUT/KARTAR/ NEW AGE / MINIMAX) (NS)

Providing, fixing, testing & commissioning of 100 mm dia Burden type, Stainless Steel dial type pressure gauge (in Pump Room) including brass isolation valve and pipe having caliberation of 0-15 Kg/cm2. MAKE H.GURU/FIEBIG (NS)

MECHANICAL/ELECTRICAL PUMPS-Fire Hydrants:- Supplying , installation , testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following , complite in all respect , as required (Diesel Driven Pump ) horizontal type , multistage , centrifugal pump of cast of iron body and brinze impeller with stainless steel shaft , mechanical seal conforming to IS 1520 OF Suitable HP ,1500 RPM water cooled with radiator , diesel engine conforming to relevant IS standard complete with autostarting mechanism , 12 /24 volt electric starting equipment , disel tank , exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick almunium sheet cladding , residebtial silencer , instruments and protection as per standard specification ,stop solenoid for auto stop in the ecent of fault with audio indications , painted with post office red colour etc .as required. M.S fabricated ,common base plate coupling ,coupling guard , foundation bolt etc .as required . . MAKE KILOSKER , LUBI MOTHER AND PLATT , ASHOK LEYLAND (1620 LPM at 56 Mtr Head, ) (DSR2.9)

Supplying , installation , testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following , complete in all respects , as required ; (Jockey Pump) Horizontal type , multistage , centrifugal pump of cast iron body and bronze impeller with stainless steel shaft , mechanical seal conforming to IS; 1520 . Suitable HP squirell cage induction motor tefc type suitable for operation on 415 volt , 3 phase 50 HZ AC supply with IP 55 class of protection for enclosure , horzontal foot mounted type with class- ' F 'insulation,conforming to IS; 325 M .S fabricated common base plate, coupling ,coupling guard , foundation bolt etc as required . M.S fabricated bolt etc as required . Suitable cement concrete foundation duly plastered and with anti vibration pad MAKE KILOSKER , LUBI MOTHER AND PLATT , ASHOK LEYLAND (180 LPM suitable for 56Mtr) (DSR 3.1)

Supplying , installation , testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following , complete in all respects , as required ; (Terrace Pump)(a ) Horizontal type , multistage , centrifugal , split casing pump of cast iron body & bronze impeller with stainless steel shsft , mechanical confirming to IS; 1520 (b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volt ,3 phase ,50 Hz , AC supply with IP55 class of protection for enclosure , horiziontal foot mounted type with class - 'F 'insulation , conforming to IS- 325 (c) M.S fabricated common base plate ,coupling ,coupling guard , foundation bolt etc as required. (d ) Suitable cement concrete foundation duly plastered and with anti vibration pads . MAKE KILOSKER , LUBI MOTHER AND PLATT , ASHOK LEYLAND 450 LPM at 35 m head (DSR4.1)

SITC OF DOL type fire pump panel suitable for 450 lpm fire pump 415 V+/-6 volts,panel shall be free standing floor mounting sheet metal enclosed dust and verming proof.Panel shall be provided with heat shrinkable sleeves and shall be coloour coded. The panel shall be suitable for cable entry from top or bottem. The minimum fault rupturing for all incoming and outgoing switch/ breakers shall be 35 KA. The panel shall be fabricated.Auto mannual Starters with change over system. MAKE (FIRE CUT,HYDROTECH attack fire (NS)

Supplying and making end termination with brass compression gland and almminium lugs for following size of PVCand PVCsheathed /XLPE almuminium conductor cable of 1.1 KV grade as required (MAKE:RR/FINOLEX/polycab ) (a) 3.CORE x 95 sq. mm (From Fire Fighting Control Panel to main fire AND SPRINKLAR pump) ESM DSR-9.1.13

3 CORE x 35 sq. mm (From Fire Fighting panel to jockey pump) ESM DSR-9.1.10

2 core x 1.5 sq .mm For pressure switch to fire panel and fire annuciator panel and flow switch ) supplying and drawing FRLS PVC insulated copper conductor cable. ESM DSR-1.17.2

3.CORE x 10 sq. mm (From Fire Fighting Control Panel to main fire pump) ESM DSR-9.1.7

Proviing , fixing , testing & commissioning of installation control valve of cast iron body , brass /bronze working parts comprising of water moter alarm , bronze seat clapper , clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates , pressure switch, cock valve complete with drain valve and bypass , test control box , ball valves MS PIPE OF REQUIRED SIZE , FLANGES , ORIFICE PLATE , GASKET ETC OF FOLLWING SIZES AS REQUIRED 150 MM DIA MAKE - HD, OMEX , GETECH , NEWAGE (DSR 24.3)

AUTO GLOW EXIT SIGNS :- AUTO GLOW EXIT SIGNS AND INDICATION SIGNS SIZE 12 "x 6", MAKE FIRE CUT AND ATTACK FIRE ,DP lndication every exit point,fire point,fire extinguisher. (NS)

FIRE EXTINGUISHERS:- SUPPLY AND INSTALLATION of ISI marked (ISI MARK 15683) portable Co2 fire extinguisher of capacity 4.5 kg flat base including valve , dischargeone metar long hose of . meter complete in all respect with explosive certificate .(MAKE: Ceasefire/FIRE CUT /Minimax, safex / kanax (NS)

SITC of ISI marked (IS: 15683) portable ABC multipurpose filled by 90% (MAP ) mono amonioum phosphate powder , nitrogen pressurised type fire extinguisher, Capacity 6 kg with 90% map complete in all resp. MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX) (NS)

SITC of Clean Agent type ISI mark IS code 15683 2006 Fire Extinguisher capacity: 2 kg MAKE (MAKE FIRE CUT ,,CEASE FIRE ,MINI MAX ,SAFEX , KANEX,) location - o.t room ,nursing station ,lab machinry room pantry kitchen. (NS)

SITC of 5 kg modular type self operated on 68o temperature Clean Agent type CE certified Fire Extinguisher filled with NAFPIV clean agent gas MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX , ) location electrical shaft ,electrical control room servar room other places where water or other camical are prohibited. (NS)

SITC of 50 KG DCP (Dry Chemical Powder) Trolley type fire extinguisher as per IS 16018I jet length minimum 8 mtr minimum discharge time 40-50 sec,tested on 30 kgf/cm2 MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX .location dg room , fire control room , ground floor of every block. (NS)

SITC of 50 KG Mechanical Foam AFFF Trolley type fire extinguisher as per IS 16018 jet length minimum 10 mtr minimum discharge time 60-180 sec,tested on 35 kgf/cm2 with 2 kg co2 external fire extinguisher MAKE (FIRE CUT ,CEASE FIRE ,MINI MAX ,SAFEX , KANAX) location dg room , fire control room , ground floor of every block. (NS)

SITC of 9 ltr capacity Fire Bucket made in 16 guage MS filled by 9 kg sand with MS angle stand having arrangement of hanging 6 buckets with shed MAKE (FIRE CUT ,KARTAR) (NS)

FIRE CHECK DOOR:- SITC OF 46 mm steel fire check door of 120 minut fire rating confirming to bs 476 part -22 and is 3614 part-11 fabricated with 2 no , 1mm thick galvnized steel sheet sandwiching with proprietary fire resistant insulation materials in between . The door frames are manufactured from 1.5mm thick galvanized steel sheet pressed from to double rebate profile of size 143mm x 57 mm . the door frame and door shutters to finish with powder coatingSITC OF 2HR FIRE RATED METAL DOOR MAKE LAKSHITA FIRE ,INDIAN FIRE , FIRE CUT . location- basement stair case , electrical cantrol room and all Floor stair case where there is Nonatured and vantilation. (NS) Note:- It may be ensured that fire fighting work in executed as per these provisions of NBC. Nothing less, nothing more. Work should be done well intime and there should be no delay on this account. A clause should be there in the DNIT that the contractor will arrange NOC from competent authority and for which 10% amount will be withheld till NOC is received.

Bitureks infra Pvt. Ltd.