ADDITION ALTERATION TO P386 AT ANCEPTA AT BRICHGUNJ PROVISION OF RAIN WATER SHED FOR BUILDING NO P838 P839 AND P840 AT VAYU VIHAR BROOKSHABAD AT AF STN PORTBLAIR

Amount

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar etc.

Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed .

Taking down Chowkhats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frame)

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame)

Disconnecting existing tanks, of capacity exceeding 2000 Ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in any position.

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions

Use and waste of form work to sides and sofit of Beams for Fair finished surfaces.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick

M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts as specified

M & L for RCC- M -30 Design Mix as in beams, cantilevers,bressummers, lintels over 1.5m span as specified

M&L for RCC- M -30 Design Mix as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item no 15.00 here in before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like

S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified

S&F Mild steel bolts exc 12mm dia and n exc 20mm dia purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long all as specified.

S &F MS work in wind ties,gutters for roof including securing bolts all as specified

M&L Painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified

S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) all as specified.

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement.

M&L Rendering 5mm thick in CM 1:3 on soffits of RCC slabs, roof projections, soffits and sides of RCC beams, waist slab, Loft Slab, RCC shelves, Chajjas, and the like finished even and smooth without using extra cement.

M&L 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement. (Note : Water proofing compound shall be measured and paid seperately)

Supply only integral WPC (3% by wt of cement).

M & L for preparing newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of putty complete all as specified and as directed.

M & L for preparing newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of putty complete all as specified and as directed.

M & L for complete removal of existing treatment on old plastered wall surfaces and applying two coats of oil bound distemper over a coat of resistant primer over a coat of putty complete all as specified and as directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified (Make Apex Ultima)

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

All as per item no 33.00 here in before but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified

M&L Light shade Vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile n.exc 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6) all as specified and directed.

All as per item no 35.00 here in before but in skirting/dado laid over 10mm thick cement plaster in cement mortar 1:4 complete all as specified

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes all as specified and directed

S&F 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, laid in trenches or in floors

S&F 110mm bore PVC (SWR) soil, waste and vent pipe, in any length , with rubber joints, fixed in walls

S&F PVC (SWR) 110mm dia bend of any radius.

S&F PVC (SWR) 110mm dia double T equal or unequal at Junctions of any radius.

Dismantling boarding/Frame work of any description, fixed in any position with nails/screws.

S & F Aluminium anodised (minimum anodisation is 50 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking and sliding arrangements etc., complete with standard aluminium sections, complete all as specified and as directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately).

Supply only 12mm thick prelamimated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and directed by Engineer-in-charge.

Supply only 5.5mm thick sheet glass, ordinary quality in squares exc 0.50 sq.m in each pane.

Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed

Supply only 150mm aluminium anodised barrel tower bolts of extruded section and fixed.

Supply only 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

Supply only Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified

Supply only 125mm aluminium handles, cast type , anodised.

S&F of 150mm Floor door stoper of aluminium alloy and tounge, anodised, with hard drawn steel sring, fixed in door.

M & L for Providing 15mm thick superior quality chemical pressure treated edged glued finger jointed rubber wood boarding tongued grooved fixed over rubber wood frame work with rubber wood runner of size 50mm x 15mm fixed at 1200mm c/c horizontally (both Direction) by secret nailing with brass screws duly fixed in ceiling including provision of designed rubber wood beading on top and bottom termination of wood boarding and finished with two coats of melamine polish over a coat of honey/natural colour wood filler putty etc, including preparation and applying sand paper and finishing to a glossy/mat finish, suspended below Truss at every 1200mm c/c in both directions using 4mm thick pre-straightened GI wire/GI Rod with adjustable clip complete all as specified and as directed. Make : RUBCO or Equivalent

S&F 12 mm thick toughened glass in required size crystal polished at the edges and with full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm,100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings & Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, stainless steel hinges to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified and directed

Providing and fixing factory made uPVC white colour casement/sliding window/door,Frames made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.) Note:-Each member of window to be measured separately with clear length. a. Frame (60mm x 58mm)

b. Sash (Style and rail) (60 mm x 78mm)

c. 'T' Profile (one vertical length in between two shutters) (60 mm X 74mm)

d. Glazing bead (35mmx 20mm)

e. Reinforcement 'T' profile 27mm x 17mm

f. Reinforcement sash (31 mmx27.5mm)

g. Reinforcement frame (28 mmx21.5mm)

h. Two track sliding frame (60mm x 62mm)

j. Sliding window Sash (42 mmx67mm)

k. Sliding interlock for window (one vertical length in each shutter) (45.5 mmx28mm)

l. Sliding glazing bead (24.5mmx16mm)

m. Reinforcement frame (30 mmx 21.5mm) x 2 nos

n. Reinforcement sash (30 mmx18mm)

M&L for Rubber wood plain solid straight wrought in scantling timber framed and fixed rebated and the solid rounded & chamfered put together with glue pinned at joints all as specified and directed.

M&L for 1st HW beads of any qty size glazed or guaged joinery with nails all as specified

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers n.exc 25 cm, watering and removing surplus soil to a distence n.exc 50 m and making good surface.

M&L PCC 1:3:6 Type type C2 (1:3:6) (40 mm graded stone aggregate) as inCement concrete in foundations,filling and mass concrete all as specified and directed.

M & L for 100mm thick PCC Type D-2 (1:4:8) Using 40 Mm graded stone Agg as in flooring of Heavy veh parking of Hard standing all as specified and directed.

M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-40Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately)

M & L for Sand filling under floors or in foundations including wateringand consolidation complete all as specified.

M & L For prepatring steel/ Iron Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed.

M & L for point wiring complete with single core multi stranded Copper conductor FRLS cable of size 1.5 sqmm PVC insulated unsheathed 1100 volt grade in and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc including 1.5 sqmm. green PVC insulated wire for earth continuty. including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall. complete all as specified and as directed by Engineer-in-Charge. One light point/bell point point controlled by one switch

One 3 pin switch socket outlet point 5 amps on independent board.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fixing Modular switch 1 way 6 A, 1 module all as specified and directed.

Supply and fixing modular socket outlet, 2/3 pin combined , 6 Amps, 2 module, 230 volts all as specified and directed.

Supply and fix in repair metal enclosure distribution board SPN 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 63 Amps, all as specified and as directed.

S & F LED Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 9W LED filament lamp E27 base including LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, complete all as specified and directed by Engineer-in-Charge.Cat No: LHFOAJD1TZ1I060of havells or equavalent of philips/bajaj

M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc. including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall.with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

M & L in repairs for sub main wiring complete with two runs of 10 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC conduit suitable size including Tee junction bends etc concealed in wall/fixed on ceiling and PVC switch board hylam sheet of 3mm thick including M.S. sunken boards of suitable size for housing switched sockets etc. including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth in brick wall.with one run of 10 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

Supply and fix Wall mounting fan electric driven single phase230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete all as per specified.

Supply only Industrial type sheet metal enclosure with metal clad plug and socket single phase with a two pin and earth plug & socket complete rated 240V, 30 Amps capacity controlled by and including One No 20 Amps MCB SP 10 KA rupturing capacity complete all as specified and directed. Make : STANDARD/CROMPTON GREAVES/ INDOASIAN

Disconnecting the electrical connections, making system pumping down, and removing the split type A/C of capacity 1.5 / 2 ton split AC including copper pipe from the existing position and shifting the same to the new location, re-connecting the A/C after making suitable hole in the wall, providing necessary connections, including closing the hole with brick masonry and finishing surfaces to match with the existing complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Fixing only split type A/C of capacity 1.5 / 2 ton split AC at require location , after making suitable hole in the wall, providing necessary connections, including closing the hole with brick masonry and finishing surfaces to match with the existing complete all as specified and directed.

M&L For Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for one light point controlled by one one way switch.

Supply and fix switch piano flush button single pole oneway 5 amp.

Supply and fix switch socket outlet 3 & 2 pin (multi pin) 5 amp flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

Supply and fix metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, complete all as as specified and as directed.

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge.

Supply and fix single pole and netural 240 Volts 6 To 32 amps complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 4 C x 25 sq mm

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point getting our in Soft Soil / hard dense soil

Island Agency

Bharat Udyog

Nirman Construction Company

M/s Saina Enterprises

Allied Trading Company

Hindustan Traders

bansal construction

DEEPAK AGENCIES