Maintenance works of ADPH and its premises for a period of one year.

Maintenance works of ADPH and its premises for a period of one year

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One coat on old work as per specifications and as per directions of Engineer in charge.

Earth work excavation for pipelines or cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T and P and scaffolding wherever...

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area as per direction of Engi...

Dismantling doors, windows and clerestory windows steel or wood shutter of area 3 m² and below including chowkhats, architrave, holdfasts etc complete and stacking to the appropriate disposal area as...

Providing Mangalore Ridge tiles set in C.M 1 2 and pointed with C.M 1 to 2 ratio.

Providing and fixing in position fully panelled Mathi or Nandi wood shutters for doors with stiles and rails of 40mm thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per d...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1 to 3 ratio and jointed with white cement slurry over existing rough plaster surface using...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to IS 15622, of approved make, in all colours, shades, excep...

Providing and laying vitrified floor tiles with thickness 9 to 10 mm of size 600 mm x 600 mm with water absorption less than 0.08 percent and conforming to IS 15622, of approved make, in all colours a...

Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 Nos of 150mm long brac...

Providing and fixing 30mm thick factory made rigid foam with both side Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top and bottom rails, covered w...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90L per 10 sqm over an under coat of primer applied at 0.75 L per 10 sqm of approved brand and manufacture t...

Providing and fixing chromium plated brass butt hinges 100x70x4 mm ordinary type with necessary chromium plated brass screws etc complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised anodic coating not less than grade AC 10 as per IS 186 transparent or dyed to required colour or shade, with necessary screws etc compl...

Providing and fixing chromium plated brass handles of 100 or 125 mm with necessary screws etc complete.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer having brand logo with ISI IS 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm wi...

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete.

Providing AMC per year for Six numbers of 50 LPH capacity RO water purifier system at ADPH.

Finishing walls with Premium Acrylic Smooth exterior paint of required shade Old work one coats applied at 0.831 per 10 sqm including preparing the surface after thoroughly cleaning the surface to rem...

Wall painting with premium acrylic emulsion paint of interior grade, having Volatile Organic Compound content less than 50 grams per litre of approved brand and manufacture, including applying additio...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1 to 4 ratio i e 1 cement to 4 fine sand including rounding off corners wherever required smooth rendering, providi...

Removal of old broken glass panes of any thickness, size, quality or description from metal frames, glazed with putty or fixed with beads including cost of labour, complete as per specifications.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc with EPDM rubber or neoprene gasket etc complete as per the architectural drawings and the directions of ...

Providing and fixing mirror of superior glass of approved quality and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular sh...

Welding by gas or electric plant including transportation of plant at site etc complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per direct...

Dismantling aluminium or Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate disposa...

Cleaning Seftic Tank of 50 users capacity as per details and instructions. While cleaning septic tank all safety and precautionary measures to be taken, Standard Operating Procedure to be adopted and ...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm inner dimensions with modular bricks of CD 75 in cement mortar 1 to 6 ratio, bed concrete 150mm thick in 1 3 6 rat...

Providing and fixing PTMT bib cock of approved quality and colour having 15 mm nominal bore, 122mm long and weighing not less than 99 g.

Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 g.

Providing and fixing PTMT grating of approved quality and colour. Circular type having 125 mm nominal dia.

Providing and fixing PTMT grating of approved quality and colour. Rectangular type with openable circular lid.

Dismantling of flushing cistern WC, Urinal, Wash basin etc of all types C.I or PVC or Vitreous China including stacking of useful materials near the site and disposal of unserviceable materials to the...

Providing and fixing water closet squatting pan Indian type W.C. pan of size 580x440 mm with integral type foot rests and with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushi...

Providing and fixing white vitreous china wash basin size 630x450 mm C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and bracket...

Providing and fixing P.V.C. flexible pipe of 32 mm dia. or 40 mm dia. waste pipe for sink or wash basin including P.V.C. waste fittings complete as per instructions of the Engineer in charge.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with 5 litre white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spre...

Providing and fixing white vitreous china pedestal type water closet i e European type W.C. pan with ISI marked white solid plastic seat and lid, 10 litre low level white P.V.C. flushing cistern, incl...

Providing and fixing 8 mm dia C.P. or S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer in charge.

Refilling available earth around trenches or pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m and lift upto 1....

Disposal of building rubbish or malba or similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as ...

Labour charges for attending to repairs to the PVC pipes of dia. 63mm to 315mm by earth work excavation cutting the old pipe installation and jointing of new pipes to the existing old pipe to the dept...

Supply and delivery of special moulded variety 50 mm dia. PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments to walk site etc complete.

Supply and delivery of special moulded variety 75mm dia. PVC couplers as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark and with its latest amendments to walk site etc complete.

Supply and delivery at site special moulded variety 50 mm dia. PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 75mm dia. PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 50 mm dia. PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 75 mm dia. PVC tee as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 50 mm dia. PVC service saddles as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 75 mm dia. PVC service saddles as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Supply and delivery at site special moulded variety 75 mm dia. PVC reducer as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Providing and installing at site of work P.V.C. pipes 75mm dia. weighing 0.651 kg including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and per...

Providing and fixing GI union in existing GI pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same comp...

Providing wrought mild steel galvanized 50mm dia. GI collar confirming to IS 1239 II, 1991 with latest amendments if any.

Supply and delivery at site wrought middle steel galvanized 50 mm dia. GI bend elbow confirming to IS 1239 II, 1991 with latest amendments if any.

Supply and delivery at site wrought middle steel galvanized 50 mm dia. GI tee confirming to IS 1239 II, 1991 with latest amendments if any.

Supply and delivery at site wrought middle steel galvanized 50mm dia. GI socket confirming to IS 1239 II, 1991 with latest amendments if any.

Providing and fixing factory made uPVC door frame made of uPVC 48x40 mm uPVC extruded sections having an overall dimension as below tolerance of 1mm with wall thickness 2.0 mm with tolerance upto 0.2...

Providing and fixing of openable door made out of multi chambered UPVC matching to RAL 9016 or as specified sections and with minimum TiO2 Titanium Dioxide at 6PHR with TPV Thermo Plastic Vulcanized a...

Cutting grooves, pockets, openings in concrete to specified size carefully without damaging the adjoining area including disposal of debris, cleaning the area etc complete with lead upto 50m and all l...

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS 12823 Grade 1 Type 11, in panelling fixed in aluminum doors, window...

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and or directions of the departmental officials, including all materials, labour, equipment and t...

Rewinding of submersible pumpset with copper winding wires of appropriate guage, as per specifications and or directions of the departmental officials, including all materials, labour, equipment and t...

Rewinding of submersible pumpset with copper winding wires ofappropriate guage, as per specifications and or directions of the departmental officials, including all materials, labour, equipment and te...

Disconnecting damaged overhead or terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer in cha...

Providing and placing on terrace at all floor levels polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over...

Providing and fixing brass ball valve 20 mm nominal bore of approved quality, High or low pressure with plastic floats complete.

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Catching the monkeys in the ADPH premises at different locations carefully without harming the adjoining structures including all expenditures such as providing food, arranging cages, involvement of f...

Repairs to existing aluminium partition including glass, board, lock, handle, beading etc cost of all material, labour complete as per specifications.

Removing beehives from the structural steel members, walls, roofs, gates, dam faces etc as per directions.

Providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by Engineer in charge 0.50 mm + 0.05 percent total coated thickness with zinc coating 120...

Providing and fixing 4 mm dia. G.I. wire chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as...

Dismantling tile work of thickness 10mm to 25mm in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer in charge.

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M30 grade made of C and D waste by block making machine with vibratory compaction laid in requi...

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia conforming to IS 13592 Type A, including jointing with seal ring conforming to IS 5382, leaving 10 mm gap for th...

Supply and delivery at site special moulded variety 160mm dia. PVC elbows as per IS 7834 1987 and fabricated as per IG124 1984 with ISI mark with its latest amendments.

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...