Loading…
Loading…
Tender Value
₹26.5 Cr
EMD Value
₹53.0 L
Closing Date
20 Aug 2026, 3:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
BRIDGE CON
17 conditions · 6 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-2 of Chapter-3, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Bid Capacity: The tender/technical bid will be evaluated based on bid capacity formula detailed in Annexure-3 of Chapter-3. The statement of existing commitments and balance amount of ongoing works should be submitted as per Annexure-E attached with tender document.
More details is mentioned in tender Document.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature of work means: - "Supply of ballast or Road work involving Quarry product or Supply (with or without laying) of Boulders/Blanketing material/Quarry product". (b) (i) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii)One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.
Note for b (1): Separate completed works of minimum required values shall also be considered for due fulfilment of technical eligibility criteria for different components. (b)(2) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b)(3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract of or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfil technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be Sublette, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract.
More details is mentioned in tender Document.
4 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
MANDATORY REQUIREMENTS: (a)Bid Security: In respect of e- tendering, payment of Bid Security shall be deposited either in cash through e-payment gateway on www.ireps.gov.in or submitted as Bank Guarantee bond from a scheduled bank of India. The bank guarantee bond shall be as per Annexure-3 of Chapter-2 and shall be valid for a period of 90 days beyond the bid validity period. Tender must be accompanied by a Bid Security as mentioned in tender documents, failing which the tender shall be summarily rejected. Fixed deposit receipt (FDR) will not be accepted as EMD for tenders invited on IREPS (e- tender portal). (b)Regarding technical and financial (eligibility criteria as mentioned in Chapter -3), scanned copies of supportive documents/certificates from competent officials are to be submitted along with their offer. (c)Certified copies of Partnership Deed, Power of Attorney duly stamped and authenticated by Public Notary, documents related to Joint Venture/MOU/ Consortium duly notarized should be submitted along with their offer. Scanned copies of documents in support of formation/registration of the company/ firm/legal authorization of the person to deal with the tender/notarized/registered wherever required as per tender conditions are to be submitted.
Manufacturing, Supplying and Stacking of machine crushed track ballast from Dala/Billi/Jhansi sources as per RDSO's specification of June/16 with upto date correction slips between Maghar - Shahjanwa- Jagtbela-Bansgaon section in connection with Shahjanwa-Dohrighat New Line Project of Lucknow Division of N.E.Railway.
DYCE-CON-BR-GKP-10-2026
DYCE-CON-BR-GKP-10-2026
Open
Works - General
24 Months
Gorakhpur, Uttar Pradesh
₹0
₹53.0 L
26 Jul 2026
26 Jul 2026
6 Aug 2026
4 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | 82000.00 | — | — | ||
| (a)-Basic cost of ballast including GST. | — | — | — | 5,92,49,920 | |
| — | 82000.00 | — | — | ||
| (b)-All other elements including transportation and GST. | — | — | — | 20,57,26,520 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD10Ballast2026ReTender.pdf Tender Documents 102026
ATTACHMENT
TD10Ballast2026ReTender.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].