Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹87.0 LAccepted-AOC 11 GURU NANAK MARKET AMBALA ROAD SAHARANPUR 247001 | SAHARANPUR | UTTAR PRADESH | 247001 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹92.4 L+₹5.3 L (6.12%)Rejected-Finance 274 A 5TH LANE NISHATGANJ LUCKNOW UP PIN 226007 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226007 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹93.3 L+₹6.2 L (7.17%)Rejected-Finance | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹94.9 L+₹7.9 L (9.04%)Rejected-Finance 307 SADAR BAZAR LUCKNOW UP 226002 | LUCKNOW | UTTAR PRADESH | 226002 | L4 | Rejected-Finance Being not lowest | |
| 5 | L5₹98.5 L+₹11.5 L (13.2%)Rejected-Finance A 16 SHIV LOK COLONY RAJPUR ROAD DEHRADUN 248 008 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248008 | L5 | Rejected-Finance Being not lowest |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
12 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE
CWE AF BAMRAULI
PROVISION OF SECURITY LIGHTS AT AF STN DARBHANGA
2023_MES_624447_1
87303/E8
Open Tender
Electrical and Maintenance Works
Item Rate
182 days
DARBHNGA
Class B Category b i and other criteria as per Tender Doc and NIT
8 documents required · 8 mandatory
₹1,000
GE AF BIHTA
₹1.8 L
Yes
24 Jan 2024
21 Oct 2023
19 Dec 2023
21 Oct 2023
12 Dec 2023
28 Nov 2023
21 Oct 2023 - 28 Oct 2023
Amount
S & F Steel tubular poles of 9.0m complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 including two coats of paintings & writing the pole number including PCC 1:2:4 for coping upto 0.6 m height above from ground level, type B-1 using 20mm graded stone aggt as in bed plates etc & including PCC 1:4:8 for upto 1.5 m depth, type D-2 using 40mm graded stone aggt,cement concrete in foundations,filling and mass concrete as in poles etc all necessary earth works & cement work required all as specified & directed by engr-in-charge.
Supply and laying 40mm dia GI pipe galvanized,light grade class including fittings in trenches, cable protection, on wall complete all as specified & directed by engr-in-charge.
Supply and laying 80mm dia GI pipe galvanized,light grade class including fittings in trenches, cable protection, on wall etc complete all as specified & directed by engr-in-charge.
Supply, Laying, connecting and testing XLPE cable underground PVC insulated and over all sheathed with aluminium conductor heavy duty 1100 volts grade laid in trenches, floors, ducts passing through pipe for road crossing etc complete all as specified and directed of following sizes :- Note: (excavation, earth work, brick protection sand cushioning and GI pipe etc shall be measured & paid for separately)
Cross sectional area 10 Sqmm 4 core
Cross sectional area 25 Sqmm 4 core
Cross sectional area 35 Sqmm 3 ½ core
Cross sectional area 50 Sqmm 3 ½ core
Cross sectional area 70 Sqmm 3 ½ core
Cross sectional area 95 Sqmm 3 ½ core
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed. (Note:excavation to be done only manaually)
Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.
Removing of excavated material n, exc 50 mtr away and depositing where directed at a level n, exc 1.5 mtr above the starting point complete all as specified.
Supply & laying brick for protection of cable sub class 'B' laid dry flat across the cable with width equal to the length of whole bricks complete all as specified and ditected.
Supply & laying sand cushioning for cable protection in trenches 8 cm before laying cable and 15 cm thick over the cable complete all as specified and ditected. Note: Sand cushioning thickness (8 cm+15 cm=23 cm) are loose thickness and only Punned thickness 18 cm will be measured and paid.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 10 sqmm,Outdoor type complete all as specified.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 sqmm,Outdoor type complete all as specified.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 35 sqmm,Outdoor type complete all as specified.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 50 sqmm,Outdoor type complete all as specified.
Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 95 sqmm,Outdoor type complete all as specified.
S & F LED street Light fitting 70 Watt, 240 V with high power energy saving pressure die cast aluminium IP 66 roadway luminiarys heat resistant toughened glass with frame better optics for uniform distribution with high power LED as Ligh source including with the help of GI pipe 25 mm(light grade) of 0.5m length and bracket , etc all accessories & including copper cable of 2.5 sqmm 3 core from junction box to light with help of GI clamp of any size and length complete all as specified and as directed.
Supply, erecting, testing and commissioning complete of manufacturer or OEM manufactured, static silent (Sound Proof enclosure) Diesel Engine Driven Generating Set capable of delivering 10 KVA, water cooled, 415 Volts (AC three phase, 4 Wire system of supply) 50 HZ at power factor 0.8 minimum. The DG Set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacturer, fuel tank with mounting arrangements and inlet , outlet return inlet oil arrangement, exhaust pipe complete and suitable for conditions prevalent at Darbhanga( Capacity of Engine, alternators shall be worked out taking all de-rating factors into consideration) including PCC foundation( of suitable size leaving at least 0.5 M all around for ease of movement and 0.5 M height), anti-vibration pads, including all features to comply with latest CPCB-IV guidelines and Comprising of followings:-
(i) ENGINE(Prime Mover): Diesel Engine 1500 RPM , direct injection ,multi cylinders ,four stroke, confirming to ISO3046/BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP to drive Alternator capable of delivering 10 KVA(8KW) at outdoor atmospheric conditions at Darbhanga,(Taking all de-rating factor into consideration), , 12/24 Volt(as per manufacturer recommendations) electric battery start, complete withy fly wheel all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer, lub oil temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system(Shut down, High water temperature, low lub oil, oil pressure, over speed etc) fuel tank and first fill of lub oil and other consumables etc .
(ii)Alternator: Brushless AC alternator, 3 Phase, 415 Volt, 4 wire, rated for output of 10 KVA/ 8 KW, Minimum power factor 0.8, 1500 RPM, IP 23 Protection class enclosure, insulation Class "H", salient pole, revolving field, single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine. (iii) BASE PLATE: made out of structural steel as per manufacturers recommended design/specifications.
(iv)AMF CONTROL PANEL: Factory made cubicle type floor mounted LT Panel board, indoor type made out of MS angle not less than 25X25X5 mm, and 1.6 mm thick MS CRCA sheet, front opening type , protection class IP-54, duly powder coated after seven tank process, with electrolytic grade copper bus bar of 300 Amps capacity for four poles, with all standard switchgear and protection, internal wiring of adequate size PVC insulated multistranded copper conductor cable etc and also consisting of followings:-
(V) ACOUSTIC ENCLOSURE: Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M at 75 % load under field condition and ox, 70DB at 3 M from Gen set when DG set is working at full load along with testing conformance, labeling certification etc as laid down in GSR No 371(E) dt 17 May 2002. (VI) Foundation/Plinth/Base: Shall be provided as per manufacturers recommendations, however minimum 0.5 m Space should be available all around the Set and height of plinth shall not be less than 0.5 M (VII) Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation og Gen Set. (VIII) MISC: Tool kit, Operation and Maintenance catalogue, spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices.
Supply, erecting, testing and commissioning complete of manufacturer or OEM manufactured, static silent (Sound Proof enclosure) Diesel Engine Driven Generating Set capable of delivering 15 kva, water cooled, 415 Volts (AC three phase, 4 Wire system of supply) 50 HZ at power factor 0.8 minimum. The DG Set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacturer, fuel tank with mounting arrangements and inlet , outlet return inlet oil arrangement, exhaust pipe complete and suitable for conditions prevalent at Darbhanga( Capacity of Engine, alternators shall be worked out taking all de-rating factors into consideration) including PCC foundation( of suitable size leaving at least 0.5 M all around for ease of movement and 0.5 M height), anti-vibration pads, including all features to comply with latest CPCB-IV guidelines and Comprising of followings:-
(i) ENGINE(Prime Mover): Diesel Engine 1500 RPM , direct injection ,multi cylinders ,four stroke, confirming to ISO3046/BS 5514, water cooled, naturally turbo charged, capable of giving adequate BHP to drive Alternator capable of delivering 15 KVA(12KW) at outdoor atmospheric conditions at Darbhanga,(Taking all de-rating factor into consideration), , 12/24 Volt(as per manufacturer recommendations) electric battery start, complete withy fly wheel all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer, lub oil temperature, pressure gauge and frequency meters and also including self starter system, dynamo, fuel electric control panel with electronic governor (ECPG) and Engine protection system(Shut down, High water temperature, low lub oil, oil pressure, over speed etc) fuel tank and first fill of lub oil and other consumables etc .
(ii)Alternator: Brushless AC alternator, 3 Phase, 415 Volt, 4 wire, rated for output of 15 KVA/ 12 KW, Minimum power factor 0.8, 1500 RPM, IP 23 Protection class enclosure, insulation Class "H", salient pole, revolving field, single bearing automatic voltage regulator coupled through flexible coupling with and to match the above engine. (iii) BASE PLATE: made out of structural steel as per manufacturers recommended design/specifications.
(iv)AMF CONTROL PANEL: Factory made cubicle type floor mounted LT Panel board, indoor type made out of MS angle not less than 25X25X5 mm, and 1.6 mm thick MS CRCA sheet, front opening type , protection class IP-54, duly powder coated after seven tank process, with electrolytic grade copper bus bar of 300 Amps capacity for four poles, with all standard switchgear and protection, internal wiring of adequate size PVC insulated multistranded copper conductor cable etc and also consisting of followings:-
(V) ACOUSTIC ENCLOSURE: Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1 M at 75 % load under field condition and ox, 70DB at 3 M from Gen set when DG set is working at full load along with testing conformance, labeling certification etc as laid down in GSR No 371(E) dt 17 May 2002. (VI) Foundation/Plinth/Base: Shall be provided as per manufacturers recommendations, however minimum 0.5 m Space should be available all around the Set and height of plinth shall not be less than 0.5 M (VII) Diesel storage tank of capacity adequate for storage of diesel for 12 hours operation og Gen Set. (VIII) MISC: Tool kit, Operation and Maintenance catalogue, spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacturer standard practices.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron strip 32X6mm , (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge. NOTE: Earth iron strip and its protection pipe upto and including 15 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc.
Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanised earth lead wire 4.0mm , (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in (1 : 2 : 4) type B1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed by Engineer-in-Charge. NOTE: Earth lead wire and its protection pipe upto and including 15 mtr only from the top of earth electrode are included under this item and additional earth strip/protection pipe etc.
M & L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed plates etc complete all as specified and directed.
M & L PCC 1:4:8 type D-2 using 40mm graded stone aggregate ,cement concrete in foundations,filling and mass concrete as in poles,etc etc complete all as specified and directed.
Material & labour for stay assembly rod of 20mm dia complete with all accessories like stay wire, plate, insulator etc, as shown in electrical plate no 1 of SSR Part-I 2009 complete including excavation and earth work with cement concrerte work (1:3:6) type C-1 using 20mm graded stone aggregate all as specified and directed.
S & F of sintex slopy head junction box of size 270X225X135 mm suitable for mounted on steel tubular pole/any pole with cover ,04 nos aluminium bus bar of size 25x3 mm for phase and neutral 01 nos 06 Amps MCB SP mounting channel for control of street light , cable gland aluminium lug and duly powder coated paint of approved colour on external and internal surface including fixing 02 Nos clamps 30x5mm along with nuts,bolts,washers including GI pipe of light grade of reqd size & length for connection of armoured cable to junction box complete all as specified and directed.
M/S S.B. Singh and Sons
M/S SHEO KUMAR SINGH AND SONS
M/s Vatsh Raj and co
Amit Engineering
Roy and Sons Infrastructers
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .