Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.4 LAccepted-AOC B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹79.6 L+₹3.0 L (3.98%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹84.8 L+₹8.3 L (10.8%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹87.8 L+₹11.2 L (14.7%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹88.2 L+₹11.6 L (15.2%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
8 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIRS AND MAINT TO CERTAIN BUILDING IN NAVAL DOCKYARD UNDER AGE B R I UNDER GE NW KUNJALI COLABA MUMBAI
2023_MES_572974_1
8535/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.7 L
Yes
6 Apr 2023
4 Jan 2023
10 Feb 2023
4 Jan 2023
8 Feb 2023
25 Jan 2023
4 Jan 2023 - 23 Jan 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge
Material and Labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 sqm but n exc 0.42 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, Digital full nano polished) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
All as per item No. 5 above but as in skirting/dado including 10mm thick rendering in CM. 1:4 as backing coat etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Coloured glazed ceramic tiles in vertical surface 300 X 200 X 7MM thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing rubbish off the premises (outside MoD land) etc complete all as specified and directed by Engineer-in-Charge
Material and Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for 20-25mm thick, machine cut, Kota stone slab, as in riser of steps, landing, skirting, dado and pillar etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Supply and fix 25 to 40 mm thick machine cut and machine polish cuddapah/shahabad stone slab, bedded and jointed in neat cement slurry over 20mm thick screed bed set in cm 1:4 including dismantling of existing slab of any description fixed as in cooking platform/ shelves /flooring complete all as specified and directed by Engineer-in-Charge
Mirror polishing on marble/granite/kota stone/stone work/Mosaic tile where ever required to give high gloss finish complete all as specified and directed by Engineer-in-Charge
Material and Labour for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-Charge
Material and Labour for cement concrete tiles 25CmX25CmX22 mm thick, machine pressed,(with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick bedding layers in CM 1:3. complete all as specified and directed by Engineer-in-Charge
Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed and pointed in neat cement slurry in floors with in equal proportions & pigments with red and yellow colour over 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine pressed pre-cast concrete interlocking coloured paver block any shape and size conforming to IS-15658-2006 of 80mm thickness M40 grade with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge
Material and Labour for machine pressed pre-cast concrete interlocking coloured paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment laid dry over stone dust or sand base and compacted using vibrator complete all as specified and directed by Engineer-in-Charge
Material and Labour for PCC 100mm thick D-2 type (1:4:8), using (40 mm graded aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge
Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall paneling & partition boards bonded wool, blanket slab including aluminium grid frame work complete all as specified and directed by Engineer-in-Charge
Material and Labour for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm etc complete all as specified and directed by Engineer-in-Charge.
Material and Labour for POP false ceiling using 600 x 900x 12mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work, main joist of size 50 x 25 mm spaced at 750 mm centre to centre, secondary joist of size 75 x20 mm fixed to main joists spaced to 900mm, suspended to roof members using 25x25x2 mm GI angles and fasteners @ 1.2M C/C, complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair roller/venetian blinds vertical/horizontal type made out of standard cloth of approved texture with necessary accessories etc complete all as specified and directed by Engineer-in-Charge
Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and directed by Engineer-in-Charge
All as per Item No 27 above but n.exc 1.5 sqm complete all as specified and directed by Engineer-in-Charge
Material and Labour powder coated Aluminium frame and shutter for doors, sliding windows & ventilators (moveable louvers type) and for partitions with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, (minimum thickness of powder coating 50micron) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 5mm thick glass sheet one side frosted ordinary quality and glazing with in square, exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suitable 'F' section 15.30 x 23.40 x 1.40mm fabricated and riveted to aluminum windows, complete all as specified and directed by Engr-in-charge.
Supply and Fixing 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work complete all as specified and directed by Engineer-in-Charge
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge
Material and Labour rendering 20 mm thick ready mix plaster as on fair faces of brick/stone work or concrete surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof complete all as specified and directed by Engineer-in-Charge
Material and Labour rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including Sagol finish complete all as specified and directed by Engineer-in-Charge
Material and Labour for rendering 5mm thick in CM 1:3 on ceiling surface complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thick wall care putty on plastered surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed by Engineer-in-Charge
Material and Labour prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by Engineer-in-Charge
Material and Labour for cleaning the surface of stone/concrete/masonry wall, floors etc by removing of algae, lichens, fungus and other microorganisms and killing them with Algae and Moss Remover to maintain the clean surface for a longer period all as specified and directed by Engineer in Charge.
Material and Labour for raking out cement loose/crack pointing or any other hard materials used and careful re-pointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and above domes for poor joints, in lime mortar 1:3 (1 lime, 3 sand mix to be approved by Consultants before application) and filling in of any holes/damaged areas of stone that may have to be filled in lime mortar. Pointing to be carefully colour matched using additives such as kattha, sand, stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour matched lime mortar for approval by Engr-in-charge. The contractor to ensure use of masking tape and sharp specialized spatula and tools to ensure clear lines and high level of workmanship on site all as specified and directed by Engr-in-Charge.
Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by Engineer-in-Charge
Material and Labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-Charge
Material and Labour 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm dia CI bends (any radiius) diminishing pieces or tapers (larger bore measured) fitted with oval access doors o complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 75mm dia of outer cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 100mm dia of outer cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed by Engineer-in-Charge
Supply, lay, connect and testing GI Tubing,15mm dia. medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete including taking down of existing pipeline all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , fixing with automatic flushing system with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 15mm bore fancy type pillar taps cast copper alloy with capsten heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle including brackets complete all as specified and directed by Engineer-in-Charge
Supply and Fixing brass chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs brass CP shower rose 125mm size complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description exc 1 Sqm but n exc 2 sqm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Ist class hard wood glazed and skeleton shutter 30 mm thick window shutters divided into squares with plain chamfered or rounded mitred and rebated sash bars with edges of sash bars and frame moulded, fitted with cut and mitred beeds for screwing glass/gauze etc size of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 35mm thick second class hard wood, plain framed, panelled shutter of 9mm BWP comercial plywood or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Ist class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints complete all as specified and directed by Engineer-in-Charge
Supply and Fixing mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0 complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 200mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm extruded aluminium alloy handles, cast type as fixed in repair complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm extruded aluminium alloy handles, cast type as fixed in repair complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work complete all as specified and directed by Engineer-in-Charge
Supply and Fixing solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with MS square tube and edges painted to match with printed sheet complete all as specified and directed by Engineer-in-Charge
Supply and Fixing factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side complete all as specified and directed by Engineer-in-Charge
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge
Material and labour for mild steel framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing new or previously untreated surface of steel of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge
Supply and Fixing mild steel expanded metal, weight nexc 4.00 Kg per sqm bent to shape required and tying with and including annealed mild steel wire not less than 0.90mm dia or fixing with galvanised steel staples suplied and fixed complete to wood or steel members, complete all as specified and directed by Engineer-in-Charge
Demolition of stone/brick masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings dressed stone work and pre cast concrete articles complete all as specified and directed by Engineer-in-Charge
Material and Labour brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge
Material & labour as fixed in repair for Stainless steel decorative railings, staircase (design and pattern as approved) made out of SS pipes, SS flats, SS plates etc. of grade 316 complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge. Design for stairs/ladders or any others will be as approved by GE.
Material & labour as fixed in repair for Stainless steel decorative railings chains alloy grade 316 having 8mm minimum thickness (design and pattern as approved) as used to connect two stainless steel post with hooks etc. complete with and including necessary welding, buffing/ polishing and fixing complete all as specified and directed by Engineer-in-Charge
Material and Labour for water proofing treatment of sunken floor/wall surfaces by applying two coats of water proofing chemical and cement mix in ratio 1:1.5, (PIDICRETE UPR or equivalent approved water proofing chemicals), complete including PCC 1:7:12 type F2 using 40mm graded aggregate as in filling all as per manufacture's instructions complete all as specified and directed by Engineer-in-Charge Make : Dr. FIXIT, Chemisol, Choksy Chemicals.
Supply and fixing vitreous china water closet, couple closet, complete with and including all accessories, fixed in repairs (make -Jaquar Cat No ARS-WHT-0313 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and fixing vitreous china wash basin, of size complete with and including all accessories, fixed in repairs (make -Jaquar Cat No CNS-WHT-WB03 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair towel rail 600mm long (make -Jaquar Cat No AQN-CHR-7111 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair Toilet roll holder (make -Jaquar Cat No AK-CHR-35753PS or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair towel ring round (make -Jaquar Cat No AQN-CHR-7721 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair soap dish (make -Jaquar Cat No AQN -CHR-7731 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair Hand shower (health Faucet) with 1M long flexible tube with wall hook Chrome Plated (make -Jaquar Cat No. ALE-CHR-593 & SHA-571 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair two way bib cock with wall flange (make -Jaquar Cat No ORP-CHR-10041 or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair angular stop cock (make -Jaquar Cat No ORP-CHR-10053PM or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair Braided hoses 450mm long (make -Jaquar Cat No ALD-CHR-803AB or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair pillar cock Chrome Plated (make -Jaquar Cat No ORM-CHR-10001 PM or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair bib cock (make -Jaquar Cat No ORP-CHR-10037PM or as approved by GE by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing glass shelf (Make- Jaquar Cat No. ACN CHR-1171N or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs centre hole basin mixer with popup waste chromium plated (jaquar cat part No QQT-CHR-7169B or as approved by GE) complete all as specified and directed by Engineer-in-Charge.
Supply and Fixing in repairs overhead shower round shape single flow cat Part No Jaquar OHS-CHR-1755 (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs paper holder Jaquar cat part No AHS-CHR-1553 (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs towel rack with lower hanger stainless steel with hook Jaquar Cat Part No AHS-CHR-1581H (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs towel ring chromium plated round with round flange Jaquar Cat Part No ACN-CHR-1121BN (or as approved by GE: complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs double coat hook Jaquar cat part No ACN-CHR-1161N (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair chromium plated tumbler holder jaquar cat Part No ACN-CHR-1141W (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs soap dish holder chromium plated Jaquar cat part No ACN-CHR-1131N or as approved by GE. complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs bib cock auto closing systemwith built in control cock with wall flange jaquar cat part No PRS-CHR-043 (or as approved by GE) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, unversal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-Charge
Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed by Engineer-in-Charge
Dismantling battens for tiles, shingles etc of any size including tiling fillets exceeding 15 cm space complete all as specified and directed by Engineer-in-Charge
Supply and Fixing roof tiles Manglore pattern interlocking at side joint and laid dry complete all as specified and directed by Engineer-in-Charge
Supply and Fixing for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge
Material and labour for providing precast cement concrete louvres and jallies, type B0 1:2:4, (12.5mm graded aggregate), 40mm thick (measured solid), including all mouldings but excluding frame in CM 1:4 (Pre cast frame shall be measured separately) complete all as specified and directed by Engineer-in-Charge
Material and labour for providing precast cement concrete type B1 1:2:4, (20mm graded aggregate) window or door cills, lintels, post, pillars, bed plate, bonders with plain fair face, including chamfers, weatherings, throating etc and setting in cm 1:4 complete all as specified and directed by Engineer-in-Charge
Material and Labour for in repair 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
Removing excavated/demolished material & debris exc. 1.50 Km but n exc. 15 Km and depositing outside MoD land where directed, in soil complete all as specified and directed by Engineer-in-Charge
Material and Labour for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and directed by Engineer-in-Charge
Shetty Construction Co
SUNRISE CONSTRUCTION CO
MADHU ENTERPRIZES
Satyanarayan Trading Co.
Vandan Enterprises
jalandhara construction
Nilesh Construction
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .