Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.3 LAccepted-AOC 2ND FLOOR K 26 VASANT KUNJ MAHIPALPUR ROAD DELHI 110037 | DELHI | NEW DELHI | DELHI | 110037 | ₹2.3 L | 1 | Accepted-AOC Being the lowest bid. |
| 2 | 2₹2.6 L+₹28,064.85 (12.2%)Rejected-Finance 13 1 BABA DEEP SINGH NAGAR JALANDHAR PUNJAB 144012 | 144012 | ₹2.6 L+₹28,064.85 (12.2%) | 2 | Rejected-Finance Being not the lowest bid |
| 3 | Rejected-Technical | - | - | Rejected-Technical Documents regarding compliance of annexure 5 is not found in order. |
| Sl No | Description | Qty | Unit | polestarengineers L2 | INDO MEP CONTRACTOR AND ENGINEERS L1 |
|---|---|---|---|---|---|
| 1.00CONCRETE WORK | |||||
| 1.10Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 1.11 | 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.94 | Cum | 7,850 ₹7,379 | 6,200 ₹5,828 Lowest |
| 2.00STEEL WORK | |||||
| 2.10Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 2.11 | Hot finished welded type tubes | 795.81 | Kg | 165 ₹1,31,308.65 | 80 ₹63,664.8 Lowest |
| 3.00ROOFING | |||||
| 3.10 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 128 | Sqm | 675 ₹86,400 Lowest | 930 ₹1,19,040 |
| 4.00DISMANTLING AND DEMOLISHING | |||||
| 4.10Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. | |||||
Tender Value
Refer Docs
EMD Value
₹6,600
Closing Date
24 Jun 2025, 3:00 pmClosed
Registrar In-Charge
Stores Section, NIT Kurukshetra
Construction of shed for concrete Lab in Civil Engineering Department at NIT Kurukshetra.
2025_NK_862893_1
SEO/CIVIL/02/25-26
Open Tender
Construction Works
Item Rate
90 days
NIT Kurukshetra
As per tender document
5 documents required · 5 mandatory
₹500
Yes
National Institute of Technology Kurukshetra
₹6,600
Yes
NIT Kurukshetra
14 Aug 2025
3 Jun 2025
25 Jun 2025
4 Jun 2025
24 Jun 2025
4 Jun 2025
4 Jun 2025 - 9 Jun 2025
9 Jun 2025
Amount
CONCRETE WORK
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
STEEL WORK
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Hot finished welded type tubes
ROOFING
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
DISMANTLING AND DEMOLISHING
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
In cement mortar
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
NON SCHEDULE ITEM
Making chases up to 7.5x7.5 cm in walls including making good the same and finishing with matching surface after housing Sheet.
Cutting holes up to 15x15 cm in in walls including making good the same and repairing the hole after insertion of pipe etc.with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete.
polestarengineers (BID ID -3231944)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .