Purchasing a new pump set and activating the entire pump set with accessories

Amount

details

I/1:-V.T.Pump Set Providing, installing ,comm. With test & trial of V.T.Pump set Capable of discharging 275000 LPH Water against a total head of 85 mtr from all causes including bowl assembly, column assembly discharge head ,Sole plate, frame, Pressure gauge,channel iorn & as per detailed specifications etc comp.(Market Rate as per Rate Analysis)

I/2:-VHS Motor:- Providing, installing ,comm. With test & trial of 120 HP VHS motor suitable for above pump set in item No.1 & as per detailed specifications etc comp.(As per R.A)

I/3:- F/A ATS Starter:- Providing, installing ,comm. With test & trial of F/A ATS Starter suitable for 120HP & above motor in item No.2 & as per detailed specifications etc comp.(As per R.A)

I/4:-L.T.Panel board (Box type):- Providing, installing ,comm. With test & trial of floor mounting Box type L.T.Panel board including all acessories & as per detailed specifications etc comp.

I/5(a):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (3.5coreX1X240) sqmm etc.& as per detailed specifications etc comp.(From Transformer to L.T.Panel board)(As per R.A)

I/5(b):-Excavation:- Making the trench in hard murum/Tar road of suitable width & depth for laying provided L.T.Cable of 25 Sqmm & above & covered with half round hume pipe complete. (PWD DSR No.16-1-3,P.No.148 & Note 1&2) (As per R.A)

I/5(C):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (3 core X240) sqmm etc.& as per detailed specifications etc comp.(From Panel to Starter & Starter to motor)(As per R.A)

I/5(d):- Armoured Cable:- Providing, erecting, jointing With test & trial ofAlluminium Armoured cable of type (1X3 X50) sqmm etc.& as per detailed specifications etc comp.(For Capacitor)(As per R.A)

I/6(a):-Earthing Arrangement:- Providing, installing ,comm. With test & trial Earthing arrangement to the installation , motor,starter etc & as per detailed specifications etc comp.

I/6(b):-G.I.Strips:- Providing erecting G.I.Strip for earthing arrangement & as per detailed specifications etc comp.(As per R.A)

I/7(a): 250mmdia Sluice Valve(Cast steel) (Cl-150) Providing, installing ,comm. With test & trial of 250mm dia cast steel Sluice valve (Cl-150) with wheels etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(b):- 250mm dia Electric Valve Actuators:-Providing,erecting 250mm dia electric valave actuators totally enclosed ,weather-proof and dust proof construction with IP-67,protection class suitable for installation in any position without lubrication , leakage leakage or other operational difficulty with special grease filled gear box and hand wheel for emergency manual operation which will automatically dis-engage on restoration of power to motor & with 10 w single phase space heater and continuous local mechanical position indicator and individually replaceble counter gear assembly and with two torque and four limit switches with S.S.flap and operated with gear driven cams and of rating 250 volts, 5A, AC/ DC torque switch dial and with TEFC squirrel cage induction motor working on 440 volts +/-10%, 3ph, 50Hz,AC of intermittent duty rating S-2, insulation class F and temp rise restricted to class B with IP-67 protection class suitable for DOL starting and with three thermostst and 30% over load margin. The torque rating of reduction gear box shall at least 1.5 times max.torque required for opening and closing valve. (As per R.A)

I/7(c):- 250mmdia Reflux Valve (Cast steel) (Cl-150) Providing, installing ,comm. With test & trial of 250mm dia cast steel Non return valve (Cl-150) etc comp.& as per detailed specifications etc comp.(As per R.A)

I/7(e):150mm dia Kinetic Air Valve(Cl-300) :-Providing, installing ,comm. With test & trial of 150mm dia Kinetic Air valve (C.S) etc comp. & as per detailed specifications etc .(As per R.A)

I/8(a):- M.S.Pipes & Specials:- Providing, erecting, jointing With test & trial of required size M.S.Pipes & Specials etc comp.(As per R.A)

I/8(b):- 250mm dia flanged Joints:- Providing, erecting, jointing With test & trial of 250mm dia flanged Joints with required material rubber packing & nut bolts etc comp.& as per detailed specifications etc comp.(As per R.A)

I/8(C):-250mm dia Dismentalling joints:- Providing, erecting, jointing With test & trial of 250mm dia dismentalling Joints with required material etc comp.& as per detailed specifications etc comp.(As per R.A)

I/9:-Tools:- Providing set of tools as per detailed specification & rate analysis & as per detailed specifications etc comp.(As per R.A)

I/10:-C.C.foundation:- Providing, installing ,comm. With test & trial of C.C.foundation block etc comp.(As per R.A)

I/11:-(B) Providing,erecting,commissioning & testing 250mm dia. Mechanical joints etc comp.(As per R.A)

I/12:-(C)Making Gas cutting to the 250mm dia M.S. Pipes to both sides for installation of Flow meter etc comp. (As per RA)

I/13:-Test & Trial:- Testing, oprating & trial of pumping machinery & all allied equipment as per direction of engineer in charge etc comp.

SHIVSHAMBHO ELECTRICAL

Shree Ganesh Electricals And Engineering Works