SPECIAL REPAIR TO CERTAIN CIVILIANS QTRS AND NCs (E) QTRS AT CHAFB

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

M & L for Non skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06sqm but n exc 0.11sqm , in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matchlaid over 15mm thick screed bed or bedding in CM 1:4 etc complete all as specified and directed.

Demoltion of Concrete (unreinforced) of any description andin any position not otherwisespecifically provided for etc complete all as specified and directed

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed or bedding in CM 1:6 etc complete all as specified and directed.

Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in vertical surfaces as in skirting etc. over 10 mm CM 1:4 rendering and pointed in white or coloured cement to match complete all as specified and directed.

M & L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 10mm thick backing coat in cement morter 1:4 on fair faces of brick or concrete surfaced etc complete all as specified and directed

M&L for 25mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base of floor finished even and fair.complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removal of debris outside of MD area in accordance of federal state and local regulation etc complete all as specified and directed.

Pre-cast cement concrete block in PCC 1:3:6 type C1(20mm graded aggregate) masonry with solid blocks, exc. 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement etc all as specified and directed

M&L for rendering 10 mm thick on fair faces of concrete surfaces on ceilings in cement mortar 1:3 and finished fair and even without using extra cement etc all as specified and directed

M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper of over a coat of chalk whitening etc all as specified and directed

M&L for Preparing newly plastered surfaces of ceiling and applying three coats of white wash etc all as specified and directed

Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and stacking at site where directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and stacking at site where directed.

Taking down steel windows/ventilators ( without taking off shutter from frame) n exc 1.50 sqm each making good disturbed surfaces and removing materials from site of work complete all as directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and stacking at site where directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed

S & F Pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate,etc complete, as specified size of frames 105x60 mm etc complete all as specified and directed

S & F 35mm thick Second class hard wood Gauzed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, size of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats etc all as specified and directed

S & F steel windows with hung shutter including box type hinges with steel hande steel peg stays, and with glazing bars complete all as specified and directed

S & F steel windows with hung shutter including box type hinges with steel hande steel peg stays, and without glazing bars complete all as specified and directed

S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar workconforming to Fe.290.Gde-E-165framed work as in grill and gratings etc complete all as specified and directed

S & F 4 mm thick plain Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed

S & F 4 mm thick frosted Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane from wooden frames or stone, concrete or brick stat surrounds, glazed with putty or fixed with beads etc complete all as specified and directed

S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples etc complete all as specified and directed.

S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.

M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer etc all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating ends of posts, backs of chowkats, etc., area tarred exceeding 0.1 Sq. M and not exceeding 0.5 Sq. M each etc all as specified and directed

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm x 19mm MS square tube EPDM rubber gasket weather seal to be provided through out the frame, the profile shall be mitre cut at two corners and jointed by inserted 2mm of 150mm long bracket of 15mm x 15mm MS square tube inside the 19mm x 19mm MS square tube and suitable screwed the door frame shall be fixed to the wall using PVC fasteners. A minimum of 6Nos screws to be provided for each frame all as specified and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid PVC moulded door shutter, with particle board core 28 to 30 mm thick(stiles ) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC shet on back face, fixed in frame at site as per specifications & drawing

S & F in repairs 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed

S & F in repairs Galvanised mild steel wire cloth, 0.58mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples.

S&F 100mm cold rolled mild steel medium weight butt hinges ,

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fasts and similar works etc all as specified and directed

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 410-O 0r Fe 310-O

S & Fixed in Repairs Vitreous china Ware wash down water closet (Pedestal), white (EWC) with white colour plastic seat cover etc complete all as specified and directed.

S & Fixed in Repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified and directed

Supply and Fix in repairs 10 Litres capacity dual type PVC low level SLIMLINE Flushing Cistern with brackets etc complete all as specified and directed.

S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand etc complete all as specified and directed.

S & F in reparis 15 mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc complete all as specified and directed

S&F double legged floor door stopper aluminium alloy with rubber etc complete all as specified and as directed

S & F in repairs 15 mm fancy type bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and directed

S & F in repairs 15 mm bore fancy type chromium plated long shank with cup ( concealed Type)Stop valves, cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unions etc completeall as specified and directed.

Removing plants/herbs grown on walls/junctions with roots using herbicide chemical,rendering and making good of existing brick/ concrete surfaces etc all as specified and directed

Supply and fixing in repairs 600mm x 450 mm PVC moulded frame looking mirror glass, fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges etc complete all as specified and directed.

S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union etc all as specified and directed.

Supply & fix repairs waste fittings brass chromium plated with PVC outer cover, 40 mm dia for stainless steel sink etc complete all as specified and directed

Supply & fix repairs waste fittings brass chromium plated with PVC outer cover, 32 mm dia for Wash bashin etc complete all as specified and directed

Supply & fix 20 mm dia curtain rods of aluminium annodised powder coated fixed in repairs brackets etc complete all as specified and directed

Supply & fix curtain rods brackets aluminium annodised powder coated fixed in repairs etc complete all as specified and directed.

Hacking out old broken glass any thickness , size quality or description from wooden / steel frame fixed with wooden beads/ metal pinning and supply & fix 3mm thick sheet glass in Squares not exc. 0.5 sqm in each pane fixed with wooden beads or putty (in metal frames ) etc complete all as specified and directed. (up to 4th storey).

Easing of door / window shutters of any size/ any number of panels for easy closing/ opening / tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding door bolts etc. all complete all specified .

Supply & fix in repairs aluminium handles cast type anodized 125mm etc complete all as specified and directed.

Supply & fix in repairs aluminium handles cast type anodized 100mm size etc complete all as specified and directed.

M & L for welding in repairs not exceeding 6mm thick metal etc complete all as specified and directed

M&L in repairs 32mm dia. PVC waste pipe for WHB 60cm long with union etc complete all as specified and directed

S&F stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc complete all as specified and as directed

Supply & fix in repairs mild steel handles , suitable for steel windows fixed with necessary nut, bolt and washers, etc complete all as specified and directed

Supply and fix in repairs mild steel peg stays, 300mm long , suitable for steel windows fixed with necessary nut, bolt and washers, etc complete all as specified and directed

Supply & fix in repairs 300mm, ordinary rat rail rod pattern springs including roller and roller plate etc complete all as specified and directed

M&L 19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed

S&F 125mm aluminium anodised Hasp and staple, safety type fixed with screws etc complete all as specified and directed

Taking up or down steel tubing and connections, 15 mm dia including cleaning for refixingor removal to store etc complete all as specified and directed

Cutting existing steel tubing for alterations or additions (Each cut measured) and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form) 15 mm dia in existing position etc complete all as specified and directed

Cutting existing steel tubing for alterations oradditions (Each cut measured) and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form)20 mm dia in existing position etc complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying infloors complete all as specified.CPVC pipe outer dia 16 mm etc complete all as specified and directed

M&L 15mm dia 15mm dia GI tubes 'medium grade'galvanised, withall fitting and fixed complete to walls and ceilings or laidin floors etc complete all as specified and directed

Supply and fix 20 mm dia GI Tubes, 'medium grade'galvanised, withall fitting and fixed complete to walls and ceilings or laidin floors etc complete all as specified and directed

Gun-metal, globe or gate valves,20 mm diawith iron wheelhead, screwed both ends for iron pipe and fixed etc complete all as specified and directed

Ball brass valves,high pressure,with polythenefloat and flynut complete,screwed for ironpipe or brassferrule and fixed etc complete all as specified and directed

S & F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part IPVC tank 500 lit

Supply and Fixing of Geyser 25 Litres Capacity Suitable for high pressure upto 8 bar, 2 Kilowatts, Powder coated metal body, Temperature indicating dial, fire retardant cable, Efficient long life Copper heating element, Shock proof & Rust proof ABS Plastic body, 5 Star rated, Glass line coated tank, Special anti corrosion protection device, including PVC pipe Hot & cold, etc complete all as specified and directed. Make BAJAJ, Model : CALDIA, CODE : 150756 or Equivalent make in HAVELLS/CG/RACOLD

Supply and fixing of Sheet metal enclosures with socket plug top and MCB, Single pole & neutral enclosure with a 2 pin & earth plug & socket complete with one single pole MCB 20 amps etc complete all as specified and directed

M & L for sub main wiring with two single core PVC insulated cable with copper conductor multistranded 1100 volts grade 2.5 sqmm in and including heavy grade PVC conduit and its accessories with fixing arrangements on pole surface, wall, ceiling etc including 2.5 sqmm PVC insulated multistranded copper earth continuity conductor and connecting to main earth dolly etc complete all as specified and directed Note : One run of earth continuity conductor,one run of PVC casing capping and two run of copper conductor together taken as one length for measuring unit length.

Supply & fixing of MCB SP, 16 Amps, 230 Volts, etc complete all as specified and directed

B5BUILDING SOLUTIONS