WBZP-BHM-N-97-01

WBZP-BHM-N-97-01

Installation of Submersible Pump near Bhejena Village Masjid (J.L. No. 118, Plot No. - 125) under Bhutura G.P. within Md Bazar P.S.

Please Enable Macros to View BoQ information

Tender Schedule for Installation of Submersible Pump near Bhejena Village Masjid (J.L. No. 118, Plot No. - 125) under Bhutura G.P. within Md Bazar P.S.

NIT No. : BHM-N-97-2025-26

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (a) 1:3:6 proportion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m

III) For built up sections / srtuctural members of specified sections weighing not less than 22.5 Kg./m

Drilling holes of requisite diameter in R.S. joists channels, tees. Plates etc. ii) Extra for drilling beyond depth of 10mm (b) (I) Dia.above 12mm and depth upto 10 mm.

Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (i) 16 mm dia bolt (b) 450 mm long

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

Plaster( to wall, floor, Ceiling etc) with sand and cement morter in/c rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating , nodsing and drip course where necessary

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :

(b) On steel or other metal surface : With super gloss (hi-gloss) -Two coats (with any shade except white)

Mobilisation and transportion of the Rig machine and its accessories and others materials, etc. to the site

Drilling of bore holes by a suitable Down The Hole (DTH) cum mud rotary combination rig with foam and mud drilling including collection of lithological surplus with maintaining the time log for drilling through different strata as directed by the Engineer in Charge

a) Drilling of 250 mm dia. borehole suitable for lowering 200 mm internal dia, casing pipe lowering through overburdens of clay / consolidated moorum / consolidated laterite / fragmented granite etc. formation including overburden Metre 320.60 upto 1 metre beyond depth of overburden.

b) Drilling of 165 mm dia. through fissure, consolidated hard rock strata with necessary valve hammer and with necessary air pressure from beyond 1 metre overburden to 200m below G.L.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes (Dia) (ii) 200 mm

Supplying, fitting and fixing G.I. cap at top (i) 200 mm

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.

Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality.

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes (Dia) (iii) 40 mm

Supplying, fitting and fixing 2.0 H.P. water cooled Submersable pump capacity

Supply of 1.5 Hp Single phase 230 volts control Panel Box

Supply & delivary of 2.5mm 3core flat cable

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (a) 1:3:6 proportion

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) 25 mm to 30 mm shuttering without staging in foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel II. (JSW/JSPL/SHYAM/SRMB/BMASL/ELECTROSTEEL/SSL)

Plaster( to wall, floor, Ceiling etc) with sand and cement morter in/c rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating , nodsing and drip course where necessary (i) With 1:6 cement mortar a) 20 mm thick Plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction..

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (i) 25 mm dia

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes (Dia)

Supplying, fitting and fixing bib cock or stop cock. Polythene Bib Cock / Stop Cock (HD) with Metal inlet (EMCO / ATLAS oe equivalent) 15mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (ii) 2000 litre capacity

Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L.

Total=

Add 18% for Goods & Service Tax=

Total =

Add 1% for Labour Welfare Cess =

Total =

District Engineer Birbhum Zilla Parishad

BIDDER INFORMATION FORM v3 BIRBHUM ZILLA PARISHAD

Name of the Bidder

Bid submitted for (NIT No)

eTender Id

BIDDERS DETAILS

EMD Details

Credential for similar nature of work. (To be supported with work order & completion report / Payment Certificate)

* NB- Filled up properly & Upload in .xls format.