Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC 107 265 BRAHAMA NAGAR KANPUR UP 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | ₹11.9 L | L1 | Accepted-AOC L-1 bid Accepted |
| 2 | L2₹12.9 L+₹97,688 (8.20%)Rejected-Finance PURARAGHUNATHPUR BABATPUR VARANASI 221006 U P | VARANASI | UTTAR PRADESH | 221006 | ₹12.9 L+₹97,688 (8.20%) | L2 | Rejected-Finance L2 |
| 3 | L3₹16.6 L+₹4.7 L (39.7%)Rejected-Finance UPPER GROUND FLOOR HOUSE NO 101 BLK QP PITAMPURA NORTH WEST DELHI DELHI 110034 | NORTH WEST | DELHI | 110034 | ₹16.6 L+₹4.7 L (39.7%) | L3 | Rejected-Finance L3 |
| Sl No | Description | Qty | Unit | Awasthi Electric Works L1 | Dubey Trading Company L2 | SARANBIR DHINDSA L3 |
|---|---|---|---|---|---|---|
| 1.00 | SITC of 18 Mtr. High Mast Pole of approved make with motorised lowering rising system for light bracket/frame, hot dip galvanized inside & outside, having pole sheet thickness 3mm Top & 4mm Bottom, Top dia minimum 150mm, bottom dia minimum 410mm, base plate suitable for wind velocity as per IS 875 part 3 ...............................................and satisfaction to the engineer in-charge.
Construction of suitable shallow foundation with RCC M-25 design mix for the high mast considering the safe soil bearing capacity .............................................. shall be deemed included in quoted unit rate.
Assembly and erection supervision of above mentioned mast ............................................. complete as required. | 2 | Job | 2,20,000 ₹4,40,000 Lowest | 3,00,000 ₹6,00,000 | 4,60,000 ₹9,20,000 |
| 2.00 | SITC of 250W LED Flood Light Fixture having die cast aluminium housing & toughened flat glass cover confirming to IP 66 ingress protection (System Lumen – 30045Lm, High Power LED with Lenses, 120LPW, PF>0.95, THD<10% st full load, CRI>70, Phase to Phase protection at 440V & >300V Auto Cut and Restart including fixing on the bracket, connections etc. complete as required. Luminaire should have minimum lifetime of 50000 burning hour and 5 years warrantee as per the technical specifications. | 20 | Nos. | 6,500 ₹1,30,000 Lowest | 7,500 ₹1,50,000 | 11,000 ₹2,20,000 |
| 3.00 | SITC of LED type Aviation obstruction light including fixing, connections etc. complete as required. Luminaire should have minimum lifetime of 50000 burning hour and 5 years warrantee as per the technical specifications. . | 4 | Nos. | 5,500 ₹22,000 | 4,500 ₹18,000 Lowest | 5,500 ₹22,000 |
| 4.00 | Supply, installation, testing and commissioning of dust & vermin proof outdoor, IP-54, floor mounted feeder pillar of suitable size on cement concrete foundations generally conforming to IS 5039 and to withstand rough usage and weather. The panel shall be fabricated with 14 SWG M.S.sheet with hinged door on front side with locking arrangement, suitable angle/ channels frame in the bottom, legs for grouting in foundation, openable cable protection covers at bottom portion, painting etc. including supplying and fixing of following accessories and making inter connection, earth connection, neutral link, etc.as per the drawings.
Incomer:
63 Amps.4P,25 KA MCCB (Ics = lcu= 100%) with extended rotary handle-- 1 No.
MCBs connecting copper strip to connect all outgoing MCBs
LED type indication lamps with control fuse and bases-3 Nos.
Outgoing :
6-32 Amps.SP,MCB C-series 10 KA -11 Nos.
15 Amps Socket and switch -1 set | 2 | Nos. | 58,500 ₹1,17,000 | 47,500 ₹95,000 | 25,000 ₹50,000 Lowest |
| 5.00 | Supply of 4 Core x 25 Sqmm Aluminium conductor XLPE insulated armoured power cable of 1.1 KV grade, confirming to IS 7098 (Part - I) with upto date ammendment. | 250 | Metre | 220 ₹55,000 Lowest | 300 ₹75,000 | 300 ₹75,000 |
| 6.00 | Supplying and making end termination with brass compression gland and aluminium lugs for size 4 x 25 sqmm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required : | 4 | Set | 225 ₹900 | 500 ₹2,000 | 200 ₹800 Lowest |
| 7.00 | Supply of 63 mm outer dia PN6 , PE 80 HDPE Pipe as per IS:4984 suitable to lay in underground. | 210 | Metre | 200 ₹42,000 | 210 ₹44,100 | 150 ₹31,500 Lowest |
| 8.00 | Laying of 63mm dia HDPE direct in underground at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required. | 125 | Metre | 100 ₹12,500 | 120 ₹15,000 | 40 ₹5,000 Lowest |
| 9.00 | Laying of additional 63mm dia HDPE Pipe direct in underground in the same trench in one tier horizontal formation at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required. | 60 | Metre | 90 ₹5,400 | 100 ₹6,000 | 40 ₹2,400 Lowest |
| 10.00 | Laying of 63mm dia HDPE Pipe in underground for laying of cable across pavement / road at depth of upto 2 mtr through Horizontal Directional Drilling Method (manual or motorised) etc. complete as required. | 25 | Metre | 880 ₹22,000 | 800 ₹20,000 | 750 ₹18,750 Lowest |
Tender Value
₹17.7 L
EMD Value
₹35,458
Closing Date
28 Jan 2025, 6:00 pmClosed
AGM(E-E)
AAI Fursatganj Airport Fursatganj, Dist-Amethi (UP)-229302
Development of Fursatganj Airport at Uttar Pradesh for RCS Operation _ Construction of Apron Taxiway and Associated Works. SH_ Provision of Apron Flood Lights at Fursatganj Airport
2024_AAI_221456_1
Provision of Apron Flood Lights at Fursatganj Airport
Open Tender
Electrical Works
Item Rate
90 days
Fursatganj Airport, UP
As per eNIT
4 documents required · 4 mandatory
₹1,180
₹35,458
13 Aug 2025
31 Dec 2024
30 Jan 2025
31 Dec 2024
28 Jan 2025
31 Dec 2024
31 Dec 2024 - 10 Jan 2025
Amount
SITC of 18 Mtr. High Mast Pole of approved make with motorised lowering rising system for light bracket/frame, hot dip galvanized inside & outside, having pole sheet thickness 3mm Top & 4mm Bottom, Top dia minimum 150mm, bottom dia minimum 410mm, base plate suitable for wind velocity as per IS 875 part 3 ...............................................and satisfaction to the engineer in-charge. Construction of suitable shallow foundation with RCC M-25 design mix for the high mast considering the safe soil bearing capacity .............................................. shall be deemed included in quoted unit rate. Assembly and erection supervision of above mentioned mast ............................................. complete as required.
SITC of 250W LED Flood Light Fixture having die cast aluminium housing & toughened flat glass cover confirming to IP 66 ingress protection (System Lumen – 30045Lm, High Power LED with Lenses, 120LPW, PF>0.95, THD<10% st full load, CRI>70, Phase to Phase protection at 440V & >300V Auto Cut and Restart including fixing on the bracket, connections etc. complete as required. Luminaire should have minimum lifetime of 50000 burning hour and 5 years warrantee as per the technical specifications.
SITC of LED type Aviation obstruction light including fixing, connections etc. complete as required. Luminaire should have minimum lifetime of 50000 burning hour and 5 years warrantee as per the technical specifications. .
Supply, installation, testing and commissioning of dust & vermin proof outdoor, IP-54, floor mounted feeder pillar of suitable size on cement concrete foundations generally conforming to IS 5039 and to withstand rough usage and weather. The panel shall be fabricated with 14 SWG M.S.sheet with hinged door on front side with locking arrangement, suitable angle/ channels frame in the bottom, legs for grouting in foundation, openable cable protection covers at bottom portion, painting etc. including supplying and fixing of following accessories and making inter connection, earth connection, neutral link, etc.as per the drawings. Incomer: 63 Amps.4P,25 KA MCCB (Ics = lcu= 100%) with extended rotary handle-- 1 No. MCBs connecting copper strip to connect all outgoing MCBs LED type indication lamps with control fuse and bases-3 Nos. Outgoing : 6-32 Amps.SP,MCB C-series 10 KA -11 Nos. 15 Amps Socket and switch -1 set
Supply of 4 Core x 25 Sqmm Aluminium conductor XLPE insulated armoured power cable of 1.1 KV grade, confirming to IS 7098 (Part - I) with upto date ammendment.
Supplying and making end termination with brass compression gland and aluminium lugs for size 4 x 25 sqmm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required :
Supply of 63 mm outer dia PN6 , PE 80 HDPE Pipe as per IS:4984 suitable to lay in underground.
Laying of 63mm dia HDPE direct in underground at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required.
Laying of additional 63mm dia HDPE Pipe direct in underground in the same trench in one tier horizontal formation at depth of 75 cm below ground level including soil excavation and refilling the trench etc. as required.
Laying of 63mm dia HDPE Pipe in underground for laying of cable across pavement / road at depth of upto 2 mtr through Horizontal Directional Drilling Method (manual or motorised) etc. complete as required.
Laying of one number PVC insulated and PVC sheathed / XPLE power cable 1.1 KVgrade/5 KV grade AFL cable of size not exceeding 25 sqmm in the existing HDPE pipe/RCC / HUME / M.S pipe as reqd.
Laying of one number PVC insulated and PVC sheathed / XPLE power cable 1.1KVgrade/5 KV grade AFL cable of size not exceeding 25 sqmm in the existing masonary open duct as required.
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection, excavation and re-filling as required.
SITC of CCR by OEM of AAI approved make ( Aeronautical Ground Light Item): Supply, Installation, testing & commisioning of ICAO compliant indoor type microprocessor based, air cooled constant current regulator (CCR) of thyristor control electronic type suitable for use on 240 VAC 50/60 Hz, input AC supply with below mentioned output power at 6.6 Amps with 5 step variation of current output suitable for local and remote control operation with 24/28 VDC control supply complete with output current indicated on multifunctional digital display, over current, over voltage, earth fault protection and earth leakage meter, positive back indication equipments relay contactor etc. as required for airfield ground lighting as per specification of following rating: 7.5 KW MP CCR at 6.6 Amps, supply voltage 240VAC and Tapping at 4 KW
Dubey Trading Company (BID ID -812678)
SARANBIR DHINDSA (BID ID -809995)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .