REPAIR AND MAINT TO JOINERY, SANITARY FITTINGS, RENDERING AND OTHER B/R WORKS IN CAMERO COMPLEX UNDER GE (AF) SUBROTO PARK

Amount

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building, complete all as specified and directed by Engr-in-charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound as per manufacturer instructions complete all as specified and directed by Engr-in-charge.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and directed by Engr-in-charge.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed by Engr-in-charge.

M&L for Preparing new surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed.

M&L for preparation of new surface and applying two coat of distemper on wall incl Priming plastered and other surfaces with alkali resistant priming paint over a coat of wall care putty complete all as specified and directed by Engr-in-charge.

M&L for preparation of new surface and applying three coat of white wash on ceiling, complete all as specified and directed by Engr-in-charge.

S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed by Engr-in-charge.

All as per above item but 20mm bore steel water tubing medium grade pipe

Dismentling existing water tank and removing from site and S&F Rotational moulded PVC water tanks of 500 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion icluding complete all as specified and directed by Engr-in-charge.

Dismentling existing water tank and removing from site and S&F PVC water tanks of 200 Ltr capacity, and fixed in postion including complete all as specified and directed by Engr-in-charge.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engr-in-charge.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 15mm bore having weight not less than 210 gms complete all as specified and directed by Engr-in-charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 20mm fixed in repair.complete all as specified and directed by Engr-in-charge.

M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 complete and including demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete all as specified and directed by Engr-in-charge.

S&F in repair 25 mm dia stainless steel fancy type brackets & stainless steel fancy type finale caps etc including fixing arrangements, complete all as specified and directed by Engr- in-charge

S&F in repair 25 mm dia stainless steel curtain rods including fixing arrangements, complete all as specified and directed by Engr- in-charge

S&F in repair PVC waste pipe 32mm bore, 0.90 m long complete all as specified and directed by Engr-in-charge

S&F for 15mm bore PVC connection 600mm long with brass nuts on both ends complete all as specified and directed by Engr-in-charge.

Dismantling boarding, any description, fixed in any position, any thickness & any type, complete all as specified and directed by Engr-in-charge.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engr-in-charge, and as per manufecturer's specifications and drawing.

S&F in repairs factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side (wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engr-in-charge, and as per manufecturer's specifications and drawing.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engr-in-charge,and as per manufecturer's specifications and drawing.

S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete all as specified and directed by Engr-in-charge.

M&L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-charge.

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-charge.

Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons etc

M&L for Pre polished Machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, and including 15 mm Screed bed or bedding layer of CM 1:4 complete all as specified and directed by Engr-in-charge

M&L for Pre polished Machine cut Kota stone slab 20-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed/backing and jointed with grey cement slurry mixed with pigment to match the shade of the slab and including Rendering/backing 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces on wall, complete all as specified and directed by Engr-in-charge

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite and including 15 mm Screed bed or bedding layer of CM 1:4 complete all as specified and directed by Engr-in-charge

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed by Engr-in-charge

M&L for 50 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed by Engr-in-charge.

M&L for 50mm thick Cement concrete type D 2, 1:4:8 (40mm graded aggregate) in sub bases, sub floors etc. complete all as specified and directed by Engr-in-charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-charge.

M&L for vitrified ceramic tiles (light shades) of 10 mm thick polished area of each tile n.exec.36 Sqm laid as in floors setting and jointed with cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and das directed by Engr-in-Charge.

All as per above item on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed by Engr-in-charge.

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-charge.

M&L for Glazed ceramic coloured tiles of size (350x250x7)mm/ (450x350x7)mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4), complete all as specified and directed by Engr-in-charge.

M&L for Rubber moulded chequered tile gloxy finished (Size 30cm x 30cm) x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and color pigment and cut and polished laid over including 15 mm Screed bed or bedding layer of CM 1:4, complete all as specified and directed by Engr-in-charge

M&L for Johnson endura paving tiles of technocommercial equivalent of size 300x300x10mm thick set and jointed in neat cement slurry and pointed with white cement to match the joint over including 15 mm Screed bed or bedding layer of CM 1:4, complete all as specified and directed by Engr-in-charge

M&L for Cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in foundations, filling and mass concrete, complete all as specified and directed by Engr-in-charge.

Providing water proofing treatment to RCC sunken slab as specified and directed as under (a) cleaning the existing RCC sunken slab and vertical wall/ RCC beam and hacking the surface. (b) 15 mm thick plastering over floor & vertical surfaces in 1:4 mixed with liquid water profing compound @ 200 per 50 kg of cement troweled to even and smooth finish without using extra cement. (c) Filling the sunken portion with water for 72 hrs and carrying out the ponding test (Any leakage / seepage noticed shall be repaired). (d) Applying two coats of elastometric acrylic water proof coating make Dr. Fixit of pidlite, Tapecrete from Cico or equivalent in sika as per sqm in each coat with roller application (Note each coat of elastomeric acrylic compound reqiuires 6-8 hrs to dry up itself second coat shall be applied on getting the first coat completely dried up. Min quantity required for coating as per manufacture instruction) complete all as specified & directed by Engr-in-Charge.

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engr-in-charge.

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) incl P or S trap etc complete all as specified and directed by Engr-in-charge.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and directed by Engr-in-Charge. Make : Cera/Parryware/Hindware

S&F in repair corner glass shelf with bracket of make- Jaquar/MARC/GEM/PARKO or Equivalent. complete all as specified and directed by Engr-in-charge.

S&F in repair hand shower (health faucet) with 1.0 m long tube and hook of Make- Prayag or equvelent complete all as specified and directed by Engr-in-charge.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.complete all as specified and directed by Engr-in-charge.

S&F in repair PTMT Bib tap long body standard of any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms), complete all as specified and directed by Engr-in-charge

S&F in repairs bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore. complete all as specified and directed by Engr-in-charge.

S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore. complete all as specified and directed by Engr-in-charge.

S&F in repairs pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts,screwed for iron pipe and fixed for 15mm bore pipe complete all as specified and directed by Engr-in-charge

S&F in repairs fancy type 15mm dia Brass CP wall mixer/basin mixer/sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed by Engr-in-charge.

M&L for repair with MS Iron welding work for Hinges, Handle or Framed/shutters work such as to MS Window/ventilators, MS doors etc (Area n exc 2.0 sqm each), complete all as specified and directed by Engr-in-charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed by Engr-in-charge

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. Complete all as specified and directed by Engr-in-charge

M&L Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick in ridges of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-charge

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as specified and directed by Engr-in-charge.

M&L RCC (Nominal mix) type B1, 1:2:4 (20mm graded aggregate) as in slab supported on walls, beams and columns in floors , roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-charge.

M&L Form work to soffits of suspended slabs such as roof slabs, floor slabs,landings and similar works : not exceeding 200mm thick (horizontal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed by Engr-in-charge

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed)not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-charge

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-charge

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc. 1.50 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-in-charge.

Taking down Door shutter of any description n exc 2.5 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-in-charge.

S&F window/Ventilator section of frame 72 x 55 mm fixed to wall or concrete surface with MS hold fast (30 x 5 mm section) 150 mm long made of galvaniszed steel powder coated and section of shutter 47 x 20 mm, mulion section 72 x 50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.60 mm including poweder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed by Engr-in-charge. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

S&F Solid PVC Door Frame of size (50x47)mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified and directed by Engr-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engr-in-charge.

Taking down frame or Chowkhats of any description exc 1.5 but n.exc. 4.0 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed by Engr-in-charge.

S&F of 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates necessary fixing lugs, hinges, lock strike plates etc. complete all as specified and directed by Engr-in-charge.

M&L for PCC 1:3:6 type C-O using 12.5 mm graded crushed stone aggregate as in back filling, coping, benching on corner of joints etc complete all as specified and directed by Enger-in-charge.

S&F 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides, complete all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood 30 mm thick factory made glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass/wire cloth etc, sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, including Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-charge

Preparing surfaces of new wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-charge.

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge.

S&F 125mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed by Engr-in-charge.

S&F 125mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-charge.

S&F 125mm long mild steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed by Engr-in-charge.

S&F 150mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed by Engr-in-charge.

S&F 250mm long mild steel sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed by Engr-in-charge.

Taking up or down CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe complete all as specified and directed by Engr-in-charge.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed

S&F PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc. complete all as specified and directed

S&F PVC SWR bends 110 mm dia. Complete all as specified and directed by Engr-in-charge

S&F PVC SWR bends 75 mm dia. Complete all as specified and directed by Engr-in-charge

S&F 110 mm PVC SWR Junction single (Single T) provided with access door. Complete all as specified and directed by Engr-in-charge

S&F 75 mm PVC SWR Junction single (Single T) provided with access door. Complete all as specified and directed by Engr-in-charge

S&F 110 mm PVC (SWR) vent cowl. Complete all as specified and directed by Engr-in-charge

S&F 75 mm PVC (SWR) vent cowl. Complete all as specified and directed by Engr-in-charge

S&F UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed by Engr-in-charge

S&F in repair PVC (SWR) floor trap, size 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in-charge.

GIR RAJ BUILDERS

J D ENTERPRISES

Ashish Sehgal and Co.

shakti construction

OMVIN ENTERPRISES LLP

Mahesh Enterprises

SURESH KUMAR SHARMA & CO

Hindustan Co.Co