PROVN OF AIR CONDITIONERS AT VARIOUS LOCATIONS AT 9 BRD, PROVN OF SECOND STANDBY POWER SUPPLY TO MAFI EQPT IN ATC BLDG, LAYING OF 4000M OF TWO CORE ARMOURED CABLE FOR AB RAISING ALARM MOD IN ATC AND PROVN OF PREPAID ELECTRIC ENENRGY METER FOR PRIVATE

Amount

Supply, install, testing & commissioning of 5 Star rated inverter AC having 2.0 TR Capacity, precision cooling technology, dual rotor invertor compressor , BLDC motor, filters, cold plasma technology, 100 % copper coils of indoor, outdoor including installation kit for inddor & outdoor unit, extra length of refrigerent copper piping, coard cable, drain pipe as red at site. Refrigrent shall be echo friendly (R-410a, R-32) complete all as specified and directed.

M&L for Sheet metel enclosure with single pole and neutral with two pin and earth plug and socket complete with one single pole MCB 20 Amps, 240 volt complete all as specified and directed.

M & L for sub main wiring with two runs of single core 4.0 Sq mm Flame retardant PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 4 Sq mm single core Flame retardant PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in & including casing & caping complete all as specified and directed.

Supply and fixing of voltage stabilizer for automatic operation single phase naturally air cooled indoor type for input variation between 170V to 250V with output Voltage 230v with accuracy +/-2.5% and of capacity 5 KVA complete all as specified and directed.

M&L for carefully taking out existing split AC up to 2 TR with stablizer, MS stand complete with proper pump down and shifting and installation at directed loaction including replacement of copper piping with insulation, top up refrigerent gas as per existing type and reqd qty to achive desired temp, necessary core cutting to passing refrigrent pipes etc complete all as specified and directed.

Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified for following size:- 95 sqmm 3.5 core

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth and getting it out for laying of cable / pole etc.

Soft/loose soil

Hard/dense soil

Soft/disintegrated rock

Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil complete all as specified and directed.

Removing the surplus spoil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level complete all as specified and directed.

Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable complete all as specified and directed. [Note : Measurement will be done after punning]

Supplying and laying un-reinforced precast concrete cable cover, class I, flat, size 250mm x 150mm x 40mm for cable protection complete all as specified and directed.

Supply, installing, tesing and commissioing of On Load changeover switch 4 pole 200 Amps conforms to Conforms to IS/IEC:60947-3) with SS Enclosure complete all as specified and directed.

Supply and fix GI Pipe Light grade with all connected accessories of sizes 80 mm complete all as specified and directed.

S& F cast iron LT cable route indicators round shape properly grouted complete all as specified and directed.

M & L for cutting existing road/hard standing of depth up to 45mm and making good the road by providing PCC 1:2:4 complete all as specified and directed

Laying, jointing of LT under ground cable of size up to 16 Sqmm, 2 core 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded Aluminium/Copper conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /culverts or enclosed in GI pipe/ fix complete all as specified. Note: Cable to be provided by GE (AF) Lohegoan free for fixing

Supply and fix GI Pipe medium grade with all connected accessories laid in trench or road crossing complete all as specified and directed. of sizes 40 mm complete all as specified and directed.

Supply, Install, Test and Commissioning of LT feeder pillar box of outdoor type of minimum size 500mm x 500mm x 200 mm fabricated out of 3.15 mm thick CRCA sheet double door(front & back opening), CPRI approved complete with powder coating with seven tank process mounted on M.S angle Iron frame of suitable size duly grouted with PCC reqd with the following:- (a) Copper bus bar 200 Amp (R Y B & N) with coloured heat shrinkable insulated sleeve 415 Volts as per IS of suitable size mounted on DMC/epoxy insulator (not less than 50mmx50mm conicle type at a maximum interval of 500 mm- 01 Set.

M&L for Cement concrete in foundations, filling and mass concrete Type D2 1:4:8 (40 mm graded aggregrate) complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, Type C1 1:3:6 20mm graded aggregrate exc. 10 cm in width and setting in mortar, complete all as specified and directed.

M&L for cement plaster 1:6, 10mm thick on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 20mm graded aggregrate in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plate No. 3 of SSR Part I of 1991 & testing complete including 15mm dia light grade GI pipe upto 7.5 mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GI watering pipe etc. complete all as specified and directed.

Supply and Installation of Smart Single Phase cellular Meter with the following specifications: • AC Single Phase Two Wire, Tamper Proof, Static Meter of Class 1.0, 240 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 4G Cellular Modem with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. • Meter Should support the following data : 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand • Meter should have connect / disconnect functionality operable from mdm/billing software and prepaid features would be MDM / Billing end as per IS 15959 part 2 • The meter should support open communication protocol DLMS with the software Note: (a) The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES. (b) The meter shall have facility to run in both prepaid and postpaid mode (c) The meters would carry 5 year warranty. (d) The quoted price would include cost of SIM card, SIM card recharge for period of 5 years and cost for upgradation and maintenance for 5 years. The contractor has to pay 5 years maintenance and upgradation of software cost to energy meter OEM and necessary clearance/no due confirmation received from OEM shall be submitted before completion of the work. ( e) The contractor is responsible to give complete satisfactory testing to user and Engr-in charge in all respect and no additional amount shall be claimed if any allied works required on site are included in scope of work.

Supply and Installation of Smart Three Phase cellular Meter with the following specifications: • AC Three Phase Four Wire, Tamper Proof, Static Meter of Class 1.0, 415 V, 50 Hz, 10 A-60 A conforming to IS-16444 and relevant IEC standards with inbuilt 4G Cellular Modem with default and on demand display, billing data generation facility, anti-tamper features, Microprocessor and LED/LCD based circuitry. • Meter Should support the following data : 15 min instantaneous data for voltage, current, power factor, power, cumulative energy and frequency, daily and monthly billing survey for Cumulative Energy and Max Demand • Meter should have connect / disconnect functionality operable from mdm/billing software and prepaid features would be MDM / Billing end as per IS 15959 part 2 • The meter should support open communication protocol DLMS with the software Note: (a) The contractor would be responsible from removing the existing meter, noting down the reading and depositing it with the MES. (b) It would be possible to run the meter in both prepaid and postpaid mode (c) The meters would carry 5 year warranty. (d) The quoted price would include cost of SIM card, SIM card recharge for period of 5 years and cost for upgradation and maintenance for 5 years. The contractor has to pay 5 years maintenance and upgradation of software cost to energy meter OEM and necessary clearance/no due confirmation received from OEM shall be submitted before completion of the work. ( e) The contractor is responsible to give complete satisfactory testing to user and Engr-in charge in all respect and no additional amount shall be claimed if any allied works required on site are included in scope of work.

Supply and Configuration of the Web based Software with following modules: (i) Meter Data Management Module The meter data management module would be responsible for collecting the data from the concentrator and make the data available to the billing system. The meter data management system would capture and provide the following data: (a) 30 min instantaneous data from all the meters for seven parameters – Cumulative Energy, Cumulative Apparent Energy (as applicable), Power, Current, Voltage, Power Factor and Frequency (b) Monthly billing survey data for cum energy and max demand (ii) Postpaid /Prepaid Billing Module The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data / billing data available to admin and end users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing. It would allow postpaid and prepaid functionality as required.

(iii) Occupation and Vacation Module The system would support occupation / vacation and billing reports. the software would be collecting data from DCU. The software would provide access to staff as well as the occupant for the data. (iv) Web site: There would be a dedicated website for the AGE and BSO team to view all the data and information. The designated users in MES would have the admin access to the application. The MES staff would also have the access of the key information on an android mobiles app (for admin use). (v) Customer Portal The system would include a customer portal for the resident /occupant to log in and view their own energy / billing data. There would be android and iOS mobile apps for the user to monitor its own data and balance on regular basis.

(vi) Energy Accounting Module The system would include features of energy accounting. The system would be able to account for total energy block wise, facility wise and would also allow calculations of unaccounted energy in case total energy meter is also available. (vii) Communication Module The system would provide communication of energy data and bills via print, email and sms methods. (viii) Meter Master Data The system would support meter master data repository. The system would support meter replacement process. (ix) Excel Export The system would support export of metering and billing data in excel format. (x) Customer Care Module - the software would include a customer care module where the user would be log in any complaints. The service provider would monitor the complaints and carry out the necessary activities for the complaints resolution. (xi) Meter Installation Module - The software would include an app based meter installation module where the meter installation or changes can be captured on the app itself and the readings may be demonstrated to the user if required on the app itself.

(xii) Activities Communication - The software support communication of the various activities such as occupation, vacation, meter change. personal detail change etc. with the user as well as the department on email. Make: Schneider, Innologix, SAP Note: (a) The software would be hosted either on GCC Server or on MES Server. In case the software is hosted on GCC Server, it would be transferred to MES server whenever the MES is made available. (b) The software would contain two year defect liability including all operating expenses such as GPRS charges, hosting charges etc. (c) GE Bank account and one payment gateway would be provided by MES. The payment gateway would be integrated with the software in that situation.. (d) The software would be scalable and expandable for meters and system of different make complying with IS16444. It would be possible to integrate provided information is available for the meter integration protocols, meter passwords etc. (e) The contractor shall submit one month bill of consumers as per format generated through web based smart metering system. Completion shall be issued after submission of one month bill and billing reports. (f) The contractor shall give one week training to staff of GE (AF) Lohegaon to prepare consumer database, tariff creation, setting at load and meter token generation etc.

S & F Sub Main Wiring with PVC Insulated FRLS multistranded copper conductor wires with 4 x10.0 sq. mm+ 2x10.0 sq.mm earth wire in one run of suitable PVC conduit complete all as specified and directed. ( Note : 4 run of phase wire 2 run of earth wire with one run of PVC conduit shall be measured and paid as one length)

Ditto all as per Ser Item No 29.00 above but with 4 x 6.0 sq. mm + 2x4.0 sq. mm earth wire complete all as specified and directed.

Ditto all as per Ser Item No 29.00 above but with 2x10.0 sq. mm + 1x6.0 sq. mm earth wire complete all as specified and directed. ( Note : 2 run of phase wire 1 run of earth wire with one run of PVC conduit shall be measured and paid as one length)

Ditto all as per Ser Item No 29.00 above but with FRLS PVC Insulated multistranded copper conductor wires of size 2x4.0 sq. mm + 1x2.5 sq. mm earth wire complete all as specified and directed.

Ditto all as per Ser Item No 29.00 above but with FRLS PVC Insulated multistranded copper conductor wires of size 2x6.0 sq. mm + 1x4.0 sq. mm earth wire complete all as specified and directed.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire, one twin core multistranded cable flat or circulas 4 sqmm incl taking out old unserviceable wire complete all as specified and directed.

Ditto all as per Ser Item No 34.00 above but Service wire of size 6 Sq mm twin core complete all as specified and directed.

Ditto all as per Ser Item No 34.00 above but Service wire of size 10 Sq mm twin core complete all as specified and directed.

M/s Vijay Airconditioning Pvt Ltd

CHAITANYA WINDWELL