Renovation of IEI to Toilet block and Port Canteen near Container Yard at Haddo Wharf, Port Blair under Port Management Board

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

a) Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

a) 5/6 amps switch

b) 3 pin 5/6 amp socket outlet

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required

Supplying of compact industrial batten suitable for single T8 LED tube Make:- Crompton ECO Cat.No.DIJB12LT8-20 and 20 W LED polycarbonate T8 tube with in built driver with metal heat sink Make:- Crompton ULTRON Cat.No. LT8-20-865(2) respectively or equivalent in Havells/Bajaj/Philips complete with all accessories etc as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of Exhaust fan 230mm sweep (metallic Range) Make:- Havells Ventail Air-DSP or equivalent in Bajaj/Crompton Greaves/RR Fans/USHA /Orient of ISI standard complete with all accessories etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

1.50.1 Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supplying of 12W LED square surface mounted downlight Make:- Philips Cat.No.SM250C LED12S-6500 PSU WH or equivalent in Bajaj/Crompton Greaves/Havells/C&S complete with all accessories etc as required.

Supplying of 6W LED slim surface square mounted LED panel with premium diffuser to ensure glare free & even light distribution Make:-Havells Cat.No.LHEAAKP7IL1W006 , 6W LED 6500K or equivalent in Bajaj/Crompton/Philips/C&S complete with all accessories etc as required.

Supplying of 9W ENDURA LED Bulkhead fitting Make:- Philips Cat.No.WT202W LED6S NW PSU S2PC or equivalent in Bajaj/Havells/crompton /C&S complete with all accessories etc as required.

Supplying of 7 watt LED mirror light fitting Make:- Crompton LINNET Cat.No.LCL-07-CDL or equivalent in Havells/Bajaj/Philips/C&S complete with all accessories etc as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 6 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -52.6 rms for 1 sec, peak-125.6) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required.

a) 2 Core x 10Sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.

a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Supplying of 35W LED post top lantern fitting Make:- Havells ENDURA SPRING 6 Cat.No.ENDURASPRING6PT35WLED740PSYMTOTG or equivalent in Bajaj/Crompton Greaves/Philips/C&S complete with all accessories etc as required.

Installation, testing and commissioning of LED post top lantern fitting including connection etc as required.

Fabrication of metallic pole for post top lantern of standard length of size 3 Mtrs height made out of 50mm dia (medium) G.I pipe suitable for mounting Make:- Havells ENDURA SPRING 6 Cat.No. ENDURASPRING6PT35WLED740PSYMTOTG including providing FRLS PVC loose wire for connection to sintex box inside dimension of size 140mm x 140mm x 95mm GSJB 1414 containing 1No. MCB 6A etc as required.

M/s Sai Electrical Works

ICONAGENCIES

DAYAL HALDER

NAVJEEVAN ENTERPRISES

M K ENGINEERING

DILIP RAJ

POWER ENGINEERING CO