Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹73.6 LAccepted-AOC A 14 USHA SADAN NEAR POST OFFICE COLABA MUMBAI 05 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹76.9 L+₹46,085.40 (0.60%)Rejected-Finance NOT AVAILABLE | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹78.3 L+₹1.9 L (2.50%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹79.8 L+₹3.3 L (4.37%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹79.8 L+₹3.4 L (4.42%)Rejected-Finance ROOM NO 206 PART III GANESH MURTI NAGAR COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Other than being lowest |
Tender Value
₹1.4 Cr
EMD Value
₹2.2 L
Closing Date
1 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
CERTAIN REPAIRS TO DAMAGED RCC MEMBERS CHAJJA PARAPET WALL AND CONNECTED ITEMS AT OLD NAVY NAGAR UNDER AGE BR I NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI
2024_MES_644358_1
8186/CWE(NW)MUMBAI/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Navy Nagar
As per tender documents
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹2.2 L
Yes
12 Jun 2024
27 Feb 2024
3 Apr 2024
27 Feb 2024
1 Apr 2024
19 Mar 2024
27 Feb 2024 - 12 Mar 2024
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Material & Labour for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and as directed by Engr-in-Charge.
Material & Labour for pre- painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and as directed by Engr-in-Charge.
Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 by using latex additives (MONOBOND) @ 500ml/bag cement used to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth Complete all as specified and as directed by Engr-in-Charge. (Note : Monobond will be measured and paid separately)
Supply and fixing in repair for filleting in any position and to any shape of section area exc 25 sq cm but n.exc 50 Sq cm in cement sand mortar 1:3 by using latex additives (MONOBOND) @ 500ml/bag cement used etc Complete all as specified and as directed by Engr-in-Charge. (Note : Monobond will be measured and paid separately)
Supply only latex additives (MONOBOND) complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engr-in-Charge.
Material and labour for mild steel rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe-410- W(Gde?E-250) quality B including working platform/scaffolding) complete all as specified and as directed by Engr-in-Charge.
Material and labour for mild steel Framed work such as grills, gratings, frame for chajja etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming including working platform/scaffolding). Complete all as specified and as directed by Engr-in-Charge.
Material and labour for mild steel Framed brackets of angles or round pipe ,tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary gusset plates, riveting etc nexc each 10Kg bracket confirming to Fe 410 or Fe 310-0 including working platform/scaffolding) complete all as specified and as directed by Engr-in-Charge.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement
Material and labour Steel work in tubular railing including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete
Material & Labour for preparaing of new surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 14.00 above but as in old surface of any description
Dismantling of cast iron or reinforced concrete drain pipes of any dia jointed in cement mortar and taking out of trenches, if required
Supply & Fixing CI soil/ waste/ vent pipe s in any length with ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls upto 20 mtr height all as required. (Including necessary scaffolding and safty equipments)
Supply & Fixing CI soil/ waste/ vent pipe s in any length with ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls upto 20 mtr height all as required. (Including necessary scaffolding and safty equipments)
Supply & Fixing CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls complete all as specified and directed by Engr-in-Charge.
Supply & Fixing CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100mm bore pipe all as specified and directed directed by Engr-in-Charge.
Supply & Fixing Bends or Tee (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia all as specified and directed directed by Engr-in-Charge.
Supply & Fixing Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted without oval access doors of bore 75 mm all as specified and directed directed by Engr-in-Charge.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Complete all as specified and as directed by Engr-in-Charge.
Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 15 x 1 mm FL incl all fittings like sockets etc. necessary working platform (scaffoldings) and safety measurs Complete all as specified and as directed by Engr-in-Charge.
Supply and fixing PVC (SWR) 160mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 15 x 1 mm FL incl all fittings like sockets etc. necessary working platform (scaffoldings) and safety measurs Complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing in repair PVC bends of 110mm dia Complete all as specified and as directed by Engr-in-Charge.
Supply & Fixing in repair PVC bends of 160mm dia Complete all as specified and as directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
Material & Labour Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.09 Sqm but n.exc 0.18 Sqm in floors over and including 15 mm thick screed bed in cement mortar 1:6 etc. set and jointed in neat cement slurry and grouted with Epoxy grout to match Complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 29.00 above but area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for glazed ceramic tiles in vertical surface 450x300x 7-8 mm thick set and jointed in neat cement slurry over and including 10 mm thick cement plaster in cment mortar 1:4 and pointed in white or colour cement to match Complete all as specified and as directed by Engr-in-Charge.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for machine cut pre-polished kota stone slab flooring 22-25mm thick over and including 15 mm thick cement screed base (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed)
Ditto all as per item No 33.00 above but as in riser of steps, skirting, dado and pillar complete all as specified and directed by Emgr-in-Charge.
Material & Labour for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, flooring, cooking platforms over including bedding layer of 20mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engr-in-Charge.
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations
Material & Labour for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete.
Material & Labour for Sand filling under floors or in foundation including watering and consolidation etc complete.
Material & Labour for coloured glazed cement concrete chequered tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclusive in the rate.)
Taking down cement or cement lime plaster on brick or stone walls etc Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for 15 mm thick plaster using factory manufactured pre mix/ready mix having minimum composition of C:S :: 1:4 conforming to IS 383 as in internal surface of wall and finish even and smooth Complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 41.00 above but 10mm thick C:S 1:3 as in ceiling
Ditto all as per item No 41.00 above but as in external surface using MONOBOND @ 250ml/bag of ready mix Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for Preparing of old decorated surfaces of walls by washing the surfce thoroughly, filling the cracks, craves with crack-filling-compound applying one coats of acrylic emulsion exterior grade (100%) etc all as specified. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers.(c)Funges formation be cleaned throughly with wire brush or by any means.
Material and labour preparation of new or previously un treated surfaces of wall and applying two coat of white wash Complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 46.00 above but two coat of white wash on ceiling. Complete all as specified and as directed by Engr-in-Charge
Ditto all as per item No 46.00 above but one coat on old decorated surface of ceiling Complete all as specified and as directed by Engr-in-Charge
Material & Labour for applying two coats of oil emulsion distemper white or tinted on wall over a coat of primer & chalk whiting & 2 mm thick Putty on new plasterd surfaces of wall after necessary preparation of surface complete all as specified and directed by Engr-in-Charge.
Ditto all as per item No 49.00 above but one coat on old decorated surface of wall complete all as specified and directed by Engr-in-Charge.
Ditto all as per item No 49.00 above but on ceiling complete all as specified and directed by Engr-in-Charge.
Ditto all as per item No 41.00 above but one coat on old decorated surface of ceiling complete all as specified and directed by Engr-in-Charge.
Demolition of concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc. removing the debris from MD complete upto 4 storey.
Material & Labour PCC Type B1 1:2:4 (20mm graded agg) as in hardstanding, flooring, mass concrete, coping and similar work including weathering, slightly rounded or chamfered angles and throating as directed all as specified and directed by Engr-in-Charge.
Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed. Hard concrete should not be removed by force upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for cleaning existing reinforcement with wire/rotary wire brush, making the surface free from loose material dirt etc, complete applying two coats of alkaline rust converting primer (i.e. rust remover) conforming to ASTM-B-117, on the rebars including cleaning the reinforcement , wire brushing to remove loose rust spalls with time interval 6 hrs between the coats and applying protective coating upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for providing and applying two coats of anti-rust protective coating in the form of Acrylic Polymer mixed with Cement in 1:1.5 proportion (1 part polymer and 1.5 parts Cement) on rebars after cleaning of rust scales as per manufacturers instruction (measurement on the basis of exposed concrete area) upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Chargeand as directed by Engg-In- Charge.
Material & Labour for carry out application of BI Polar migratory corrosion inhabitor on concrete surface (this inhabitor shall have migratory kind of property which permit the material to migrate to a vertural extend of 100 mm , through pores of concrete inhabbting the corroser and depassivating the elctro chemical reaction it should have property to attack anode as well as cathode which is purely alkaline in nature (Ph 9.5) so it has no carcinogen activities with concrete upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster or micro concreting conforming ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bonding between old concrete and new concrete upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for Building up the profile of structrual members by using latex B2 modified air cured mortar system in damaged areas of column, beam, ceiling, chajjas etc (1 part cement 3 part sand with 20% epoxy latex based bond by wt of cement - 0.5 w/c ratio) in 20mm average thickness including leveling profiling etc. upto 15 storey ht of bldg Complete all as specified and as directed by Engr-in-Charge.
Grubbing up and uprootinng of trees / plants from external walls of bldgs pouring muratic acid for burning risidual roots in any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for Writing letters of figures (Block,Roman,Italic, or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level)
(Note:- For item No 1.00 to 62.00 Work for few of the items may be carried out at G+14 bldg including top roof, parapet and shaft walls, cost for scaffolding & safety measures for repairs shall be inlcuded in the rates quoted by the bidder).
SHREE JAGDISH FURNITURE CO.
ASHOK CONSTRUCTION
RAMESH ENTERPRISES
satyanarayan conastruction
satguruenterprises
M/s. MAYUR ENTERPRISES
RAVINDRA SALES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .